Silicon Etch Rate Using Chlorine Trifluoride
- 1 January 2004
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 151 (11) , G783-G787
Abstract
The mechanism causing the behavior of the silicon etch rate using chlorine trifluoride gas, which appears to be independent of the substrate temperature in a horizontal cold-wall reactor, is clarified by means of numerical calculations taking into account the surface chemical reaction rate on the silicon substrate surface and the transport phenomena in the entire reactor. The activation energy of the overall rate constant of its surface chemical reaction is evaluated, for the first time, to be 6000Jmol−1,6000Jmol−1, which can reproduce the etch rate and its behavior obtained by the measurement. With increasing substrate temperature in the reactor, the effect of a moderate increase in both the diffusivity of chlorine trifluoride gas and the overall rate constant is considered to be compensated by the decrease in the chlorine trifluoride gas concentration due to the gas volume expansion in the gas phase above the substrate. Therefore, the etch rate can be independent of the substrate temperature. © 2004 The Electrochemical Society. All rights reserved.Keywords
This publication has 14 references indexed in Scilit:
- High-Performance Silicon Etching Using Chlorine Trifluoride GasJournal of the Electrochemical Society, 2003
- A New Isotropic Dry Etching Using ClF3 Gas for Si Micromachining.Journal of the Japan Society for Precision Engineering, 2000
- Low Temperature Plasmaless Etching of Silicon Dioxide Film Using Chlorine Trifluoride Gas with Water VaporJournal of the Electrochemical Society, 2000
- Dominant Overall Chemical Reaction in a Chlorine Trifluoride–Silicon–Nitrogen System at Atmospheric PressureJapanese Journal of Applied Physics, 1999
- Gas-phase etching with ClF3 gas at atmospheric pressure and at room temperature – anisotropic etchingApplied Surface Science, 1998
- Transition metal cleaning using thermal beamsJournal of Vacuum Science & Technology A, 1997
- Anisotropic and damageless etching of single-crystalline silicon using chlorine trifluoride molecular beamJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1992
- Plasmaless etching of silicon using chlorine trifluorideJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1991
- Plasmaless cleaning process of silicon surface using chlorine trifluorideApplied Physics Letters, 1990
- Plasmaless dry etching of silicon with fluorine-containing compoundsJournal of Applied Physics, 1984