Decoupling Transparency and Electron Injection in Ultrathin Ag Electrodes Using an Al/MoO 3 Double Seed Layer for Transparent Quantum Dot Light‐Emitting Diodes
Open Access
- 3 September 2026
- journal article
- Published by Wiley in Nanophotonics
- Vol. 15 (17) , e70283
Abstract
There is growing interest in transparent quantum dot light‐emitting diodes (Tr‐QLEDs) for window‐type displays. For such devices, the top transparent electrode must simultaneously provide high optical transmittance, low sheet resistance, and efficient charge injection. Ultrathin Ag films are promising because of their high conductivity and transparency, but they tend to grow via the Volmer–Weber mode, resulting in poor continuity and increased resistance. Although seed layers have been widely used to improve Ag film continuity, their influence on charge injection in practical devices has received limited attention. Here, an Al/MoO 3 double seed layer is introduced, in which MoO 3 provides high transmittance and low sheet resistance, while Al enhances electron injection. This strategy enables continuous 10 nm Ag films with a transmittance of 63.48% and a sheet resistance of 7.35 Ω sq −1 . Tr‐QLEDs incorporating the Al/MoO 3 double seed layer exhibit a twofold increase in external quantum efficiency and a threefold improvement in operational lifetime compared with devices employing a MoO 3 single seed layer. Furthermore, large‐area Tr‐QLEDs are demonstrated on a 2 × 2 inch substrate, highlighting the potential of this electrode strategy for scalable transparent displays.Keywords
Funding Information
- National Research Foundation of Korea (RS‐2025‐25420958)
- Korea Institute for Advancement of Technology (RS‐2025‐02214408)
This publication has 47 references indexed in Scilit:
- Universal and Nondestructive Direct Photolithography of Colloidal Quantum Dots Using Photocrosslinkable Polymer BlendsAdvanced Functional Materials, 2025
- Recent Advances and Challenges of Colloidal Quantum Dot Light‐Emitting Diodes for Display ApplicationsAdvanced Materials, 2023
- Highly Efficient Double‐Side‐Emitting Electroluminescent Quantum Dot Thin Film with Transparent MoO3/Ag:Cu/MoO3 Electrode Prepared by Thermal Co‐EvaporationAdvanced Materials Technologies, 2022
- Low‐Temperature Solution‐Processed Transparent QLED Using Inorganic Metal Oxide Carrier Transport LayersAdvanced Functional Materials, 2021
- Thin‐Metal‐Film‐Based Transparent Conductors: Material Preparation, Optical Design, and Device ApplicationsAdvanced Optical Materials, 2020
- Extremely Vivid, Highly Transparent, and Ultrathin Quantum Dot Light‐Emitting DiodesAdvanced Materials, 2017
- Interfacial Engineering of Ultrathin Metal Film Transparent Electrode for Flexible Organic Photovoltaic CellsAdvanced Materials, 2014
- Eliminating Micro‐Cavity Effects in White Top‐Emitting OLEDs by Ultra‐Thin Metallic Top ElectrodesAdvanced Optical Materials, 2013
- Improvement of Transparent Metal Top Electrodes for Organic Solar Cells by Introducing a High Surface Energy Seed LayerAdvanced Energy Materials, 2013
- Highly Conductive and Transparent PEDOT:PSS Films with a Fluorosurfactant for Stretchable and Flexible Transparent ElectrodesAdvanced Functional Materials, 2011