Jiwoong Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jiwoong Yang has a total of 223 co-authors. Here are the top co-authors by number of shared publications:
- Moon Kee Choi
Department of Materials Science and Engineering, Ulsan National Institute of Science and Technology, Ulsan, Republic of Korea
14 shared publications Shi Li
13 shared publications- Dae-Hyeong Kim
Institute for Basic Science (IBS)
12 shared publications Kiwook Kim
Department of Energy Science and Engineering Daegu Gyeongbuk Institute of Science and Technology (DGIST) Daegu Republic of Korea
12 shared publicationsSoyeon Lee
Daegu Gyeongbuk Institute of Science and Technology (DGIST)
10 shared publications- Taeghwan Hyeon
Center for Nanoparticle Research, Institute for Basic Science, Seoul, Republic of Korea
10 shared publications
Latest Publications
- Open Access
Quantum Dot‐Based Color Conversion Layers for Displays, Lighting, and Emerging Technologies
Quantum dot‐based color conversion layers (QD‐CCLs) have emerged as key spectral‐engineering platforms for next‐generation optoelectronic systems, enabling precise control of light emission through efficient photon conversion. Owing to their high photoluminescence quantum yield, narrow emission linewidth, and size‐tunable bandgaps, quantum dots (QDs) offer significant advantages over conventional phosphors for lighting and display applications. Beyond material properties, QD‐CCL performance is governed by the interplay between material photophysics, optical design, and structural architecture. This review provides a unified perspective on QD‐CCLs by integrating advances across QD materials (Cd‐based, perovskite, and heavy‐metal‐free systems), device architectures, and mechanically deformable platforms. Particular emphasis is placed on optical management strategies that control photon absorption, reabsorption, and light extraction, as well as structural approaches that enhance conversion efficiency and suppress excitation‐light leakage. Emerging design considerations in flexible and stretchable systems are also discussed, highlighting the coupling between mechanical deformation and optical performance. Beyond conventional lighting and displays, QD‐CCLs are further explored as functional photonic interfaces in applications such as visible light communication and human‐machine interfaces. By bridging materials, optics, and device engineering, this review establishes a design framework for QD‐CCLs and outlines future directions toward multifunctional photonic systems.
Open AccessQuantum Dot‐Based Color Conversion Layers for Displays, Lighting, and Emerging Technologies
Quantum dot‐based color conversion layers (QD‐CCLs) have emerged as key spectral‐engineering platforms for next‐generation optoelectronic systems, enabling precise control of light emission through efficient photon conversion. Owing to their high photoluminescence quantum yield, narrow emission linewidth, and size‐tunable bandgaps, quantum dots (QDs) offer significant advantages over conventional phosphors for lighting and display applications. Beyond material properties, QD‐CCL performance is governed by the interplay between material photophysics, optical design, and structural architecture. This review provides a unified perspective on QD‐CCLs by integrating advances across QD materials (Cd‐based, perovskite, and heavy‐metal‐free systems), device architectures, and mechanically deformable platforms. Particular emphasis is placed on optical management strategies that control photon absorption, reabsorption, and light extraction, as well as structural approaches that enhance conversion efficiency and suppress excitation‐light leakage. Emerging design considerations in flexible and stretchable systems are also discussed, highlighting the coupling between mechanical deformation and optical performance. Beyond conventional lighting and displays, QD‐CCLs are further explored as functional photonic interfaces in applications such as visible light communication and human‐machine interfaces. By bridging materials, optics, and device engineering, this review establishes a design framework for QD‐CCLs and outlines future directions toward multifunctional photonic systems.
- 29 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (19) , 12814-12826
Excited-State Modulation by Sparse Acceptor Sites in Donor-Rich Linear Conjugated Polymer Nanoparticles for Photocatalytic Hydrogen Evolution
Donor-rich conjugated polymers are attractive photocatalysts owing to their strong light-harvesting capability, synthetic accessibility, and excellent processability. However, their photocatalytic performance is often limited by rapid excited-state relaxation and charge recombination. Here, we demonstrate a sparse acceptor strategy for regulating excited-state dynamics in donor-rich linear conjugated polymer nanoparticles. An alkoxy-poly(p-phenylene)-based polymer (PP) is modified with approximately 2 mol % benzothiadiazole (BT), thiophene-linked benzothiadiazole (DTBT), or thiophene-linked benzoselenadiazole (DTBSe) units and subsequently processed into aqueous nanoparticles through nanoprecipitation. Although all polymers retained donor-rich optical characteristics, sparse acceptor incorporation significantly influenced excited-state behavior. In particular, PP-DTBT exhibited spectroscopic signatures consistent with acceptor-mediated excited-state relaxation, prolonged photoluminescence lifetimes, and enhanced populations of long-lived photoexcited species. Transient spectroscopic analyses further revealed acceptor-mediated excited-state stabilization and Pt-mediated charge extraction under photocatalytic conditions. These characteristics were reflected in the photocatalytic performance, with PP-DTBT showing the highest hydrogen evolution activity of 1.2 mmol g–1 h–1, substantially outperforming the BT- and DTBSe-containing analogues. The results demonstrate that sparse acceptor incorporation can effectively regulate excited-state relaxation, generate long-lived excited states, and promote more favorable charge extraction and utilization pathways without disrupting the donor-rich nature of the polymer backbone. This work establishes sparse acceptor-site engineering as an effective strategy for controlling excited-state dynamics and enhancing photocatalytic hydrogen evolution in donor-rich polymer nanoparticles.
- 29 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (19) , 12814-12826
Excited-State Modulation by Sparse Acceptor Sites in Donor-Rich Linear Conjugated Polymer Nanoparticles for Photocatalytic Hydrogen Evolution
Donor-rich conjugated polymers are attractive photocatalysts owing to their strong light-harvesting capability, synthetic accessibility, and excellent processability. However, their photocatalytic performance is often limited by rapid excited-state relaxation and charge recombination. Here, we demonstrate a sparse acceptor strategy for regulating excited-state dynamics in donor-rich linear conjugated polymer nanoparticles. An alkoxy-poly(p-phenylene)-based polymer (PP) is modified with approximately 2 mol % benzothiadiazole (BT), thiophene-linked benzothiadiazole (DTBT), or thiophene-linked benzoselenadiazole (DTBSe) units and subsequently processed into aqueous nanoparticles through nanoprecipitation. Although all polymers retained donor-rich optical characteristics, sparse acceptor incorporation significantly influenced excited-state behavior. In particular, PP-DTBT exhibited spectroscopic signatures consistent with acceptor-mediated excited-state relaxation, prolonged photoluminescence lifetimes, and enhanced populations of long-lived photoexcited species. Transient spectroscopic analyses further revealed acceptor-mediated excited-state stabilization and Pt-mediated charge extraction under photocatalytic conditions. These characteristics were reflected in the photocatalytic performance, with PP-DTBT showing the highest hydrogen evolution activity of 1.2 mmol g–1 h–1, substantially outperforming the BT- and DTBSe-containing analogues. The results demonstrate that sparse acceptor incorporation can effectively regulate excited-state relaxation, generate long-lived excited states, and promote more favorable charge extraction and utilization pathways without disrupting the donor-rich nature of the polymer backbone. This work establishes sparse acceptor-site engineering as an effective strategy for controlling excited-state dynamics and enhancing photocatalytic hydrogen evolution in donor-rich polymer nanoparticles.
- 14 September 2026
- Published by Springer Nature in Nature Nanotechnology
- Vol. 21 (11) , 1565-1574
High-resolution intrinsically stretchable quantum-dot displays through thermally assisted intaglio transfer printing
- 14 September 2026
- Published by Springer Nature in Nature Nanotechnology
- Vol. 21 (11) , 1565-1574
High-resolution intrinsically stretchable quantum-dot displays through thermally assisted intaglio transfer printing
- Open Access
- 3 September 2026
- Published by Wiley in Nanophotonics
- Vol. 15 (17) , e70283
Decoupling Transparency and Electron Injection in Ultrathin Ag Electrodes Using an Al/MoO 3 Double Seed Layer for Transparent Quantum Dot Light‐Emitting Diodes
There is growing interest in transparent quantum dot light‐emitting diodes (Tr‐QLEDs) for window‐type displays. For such devices, the top transparent electrode must simultaneously provide high optical transmittance, low sheet resistance, and efficient charge injection. Ultrathin Ag films are promising because of their high conductivity and transparency, but they tend to grow via the Volmer–Weber mode, resulting in poor continuity and increased resistance. Although seed layers have been widely used to improve Ag film continuity, their influence on charge injection in practical devices has received limited attention. Here, an Al/MoO 3 double seed layer is introduced, in which MoO 3 provides high transmittance and low sheet resistance, while Al enhances electron injection. This strategy enables continuous 10 nm Ag films with a transmittance of 63.48% and a sheet resistance of 7.35 Ω sq −1 . Tr‐QLEDs incorporating the Al/MoO 3 double seed layer exhibit a twofold increase in external quantum efficiency and a threefold improvement in operational lifetime compared with devices employing a MoO 3 single seed layer. Furthermore, large‐area Tr‐QLEDs are demonstrated on a 2 × 2 inch substrate, highlighting the potential of this electrode strategy for scalable transparent displays.
- 3 September 2026
- Published by Wiley in Nanophotonics
- Vol. 15 (17) , e70283
Open AccessDecoupling Transparency and Electron Injection in Ultrathin Ag Electrodes Using an Al/MoO 3 Double Seed Layer for Transparent Quantum Dot Light‐Emitting Diodes
There is growing interest in transparent quantum dot light‐emitting diodes (Tr‐QLEDs) for window‐type displays. For such devices, the top transparent electrode must simultaneously provide high optical transmittance, low sheet resistance, and efficient charge injection. Ultrathin Ag films are promising because of their high conductivity and transparency, but they tend to grow via the Volmer–Weber mode, resulting in poor continuity and increased resistance. Although seed layers have been widely used to improve Ag film continuity, their influence on charge injection in practical devices has received limited attention. Here, an Al/MoO 3 double seed layer is introduced, in which MoO 3 provides high transmittance and low sheet resistance, while Al enhances electron injection. This strategy enables continuous 10 nm Ag films with a transmittance of 63.48% and a sheet resistance of 7.35 Ω sq −1 . Tr‐QLEDs incorporating the Al/MoO 3 double seed layer exhibit a twofold increase in external quantum efficiency and a threefold improvement in operational lifetime compared with devices employing a MoO 3 single seed layer. Furthermore, large‐area Tr‐QLEDs are demonstrated on a 2 × 2 inch substrate, highlighting the potential of this electrode strategy for scalable transparent displays.
- Top Cited PapersOpen Access
- 1 September 2026
- Published by KEAI Publishing in eScience
- Vol. 6 (5)
Composition-driven anion vacancy control in I–III–VI CuIn(S1−xSex)2 quantum dots for efficient photoelectrochemical hydrogen production
- 1 September 2026
- Published by KEAI Publishing in eScience
- Vol. 6 (5)
Top Cited PapersOpen AccessComposition-driven anion vacancy control in I–III–VI CuIn(S1−xSex)2 quantum dots for efficient photoelectrochemical hydrogen production
- Open Access
- 4 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (42) , 28233-28240
Site-specific fluorination on donor–acceptor polymers enhances intramolecular charge transfer for photocatalytic hydrogen evolution
The donor-fluorinated polymer PBF8BT-DF significantly enhances photocatalytic hydrogen evolution by promoting exciton delocalization and intramolecular charge transfer, stabilizing the excited state for efficient interfacial charge extraction.
- 4 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (42) , 28233-28240
Open AccessSite-specific fluorination on donor–acceptor polymers enhances intramolecular charge transfer for photocatalytic hydrogen evolution
The donor-fluorinated polymer PBF8BT-DF significantly enhances photocatalytic hydrogen evolution by promoting exciton delocalization and intramolecular charge transfer, stabilizing the excited state for efficient interfacial charge extraction.
- 20 May 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (21) , 15266-15278
Nanocrystal Geometry Governs Phase Transformation Pathways in Palladium Hydride
Pathways and structural dynamics of phase transformations impact performance of materials in energy and information storage technologies. Palladium hydride (PdHx) nanocrystals are an ideal model system for studying solute-induced phase transformations, where elastic energy from lattice mismatch between α-PdHx and β-PdHx phases is often considered a key to determining the transformation pathways. α/β-PdHx interfacial elastic energy is affected by the confined geometry of a nanocrystal. However, how nanocrystal geometry influences phase transformation pathways is largely unknown. Using in situ liquid phase transmission electron microscopy, we directly visualize hydrogenation in Pd nanocrystals with two geometries, a nanocube and a hexagonal nanoplate. Both follow similar sequences of an initially curved nucleus, interface flattening, and reverse-stage nucleation; however, their evolving α/β-PdHx interfaces exhibit geometry-dependent crystallographic alignments. In nanocubes, {100}-aligned configurations conform to static elastic energy ordering, representing a pathway that maintains a local mechanical equilibrium, whereas nanoplates display both {110}- and {211}-aligned interfaces. Theoretical simulations show that geometry determines the accessibility of alternative phase transformation pathways as the system is driven far from equilibrium during hydrogenation. These findings identify geometry as a fundamental parameter for directing phase transformation pathways, offering design principles for accessing atypical configurations and improving properties of intercalation-based devices.
- 20 May 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (21) , 15266-15278
Nanocrystal Geometry Governs Phase Transformation Pathways in Palladium Hydride
Pathways and structural dynamics of phase transformations impact performance of materials in energy and information storage technologies. Palladium hydride (PdHx) nanocrystals are an ideal model system for studying solute-induced phase transformations, where elastic energy from lattice mismatch between α-PdHx and β-PdHx phases is often considered a key to determining the transformation pathways. α/β-PdHx interfacial elastic energy is affected by the confined geometry of a nanocrystal. However, how nanocrystal geometry influences phase transformation pathways is largely unknown. Using in situ liquid phase transmission electron microscopy, we directly visualize hydrogenation in Pd nanocrystals with two geometries, a nanocube and a hexagonal nanoplate. Both follow similar sequences of an initially curved nucleus, interface flattening, and reverse-stage nucleation; however, their evolving α/β-PdHx interfaces exhibit geometry-dependent crystallographic alignments. In nanocubes, {100}-aligned configurations conform to static elastic energy ordering, representing a pathway that maintains a local mechanical equilibrium, whereas nanoplates display both {110}- and {211}-aligned interfaces. Theoretical simulations show that geometry determines the accessibility of alternative phase transformation pathways as the system is driven far from equilibrium during hydrogenation. These findings identify geometry as a fundamental parameter for directing phase transformation pathways, offering design principles for accessing atypical configurations and improving properties of intercalation-based devices.
- Top Cited Papers
- 2 February 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (14) , e19146
Broadband Circularly Polarized Light Detection via Spin‐Selective Charge Transport in Quantum Dot Photodiodes
Circularly polarized light (CPL) detection provides polarization‐resolved information, enabling advanced applications in quantum technologies, bioimaging, secure communications, and multi‐level optical data processing. However, conventional CPL photodetectors typically rely on intrinsically chiral absorbers, restricting operation to the UV–vis range and hindering extension into the near‐infrared (NIR) and shortwave infrared (SWIR), which are critical for deep tissue imaging and low‐visibility sensing. Here, we demonstrate broadband CPL detection with quantum dot (QD) photodiodes that exploit the chiral‐induced spin selectivity effect in chiral‐ZnO charge transport layers. Chiral ligand‐functionalized ZnO electron transport layers selectively transmit spin‐polarized charge carriers from QDs, enabling CPL‐specific photocurrent generation even in spectral regions without intrinsic chiral absorption. Heavy‐metal‐free Cu–In–Se QD‐photodiodes exhibit outstanding specific detectivity ( D * ) of 1.28 × 10 12 Jones without external bias and broadband CPL detection ( g Iph : ∼0.17 at 260 nm and ∼0.13 at 780 nm), while PbS QD‐devices extend CPL detection across 250–1700 nm (UV–Vis–NIR–SWIR) with superior performance ( D * : 1.45 × 10 12 Jones). The chiral‐transport‐driven strategy offers fundamental insights into CPL photodetection and establishes a scalable and optically passive platform for broadband polarization‐resolved optoelectronics.
- 2 February 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (14) , e19146
Top Cited PapersBroadband Circularly Polarized Light Detection via Spin‐Selective Charge Transport in Quantum Dot Photodiodes
Circularly polarized light (CPL) detection provides polarization‐resolved information, enabling advanced applications in quantum technologies, bioimaging, secure communications, and multi‐level optical data processing. However, conventional CPL photodetectors typically rely on intrinsically chiral absorbers, restricting operation to the UV–vis range and hindering extension into the near‐infrared (NIR) and shortwave infrared (SWIR), which are critical for deep tissue imaging and low‐visibility sensing. Here, we demonstrate broadband CPL detection with quantum dot (QD) photodiodes that exploit the chiral‐induced spin selectivity effect in chiral‐ZnO charge transport layers. Chiral ligand‐functionalized ZnO electron transport layers selectively transmit spin‐polarized charge carriers from QDs, enabling CPL‐specific photocurrent generation even in spectral regions without intrinsic chiral absorption. Heavy‐metal‐free Cu–In–Se QD‐photodiodes exhibit outstanding specific detectivity ( D * ) of 1.28 × 10 12 Jones without external bias and broadband CPL detection ( g Iph : ∼0.17 at 260 nm and ∼0.13 at 780 nm), while PbS QD‐devices extend CPL detection across 250–1700 nm (UV–Vis–NIR–SWIR) with superior performance ( D * : 1.45 × 10 12 Jones). The chiral‐transport‐driven strategy offers fundamental insights into CPL photodetection and establishes a scalable and optically passive platform for broadband polarization‐resolved optoelectronics.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale Horizons
Design criteria for HTL-blended emissive layers in red quantum dot light-emitting diodes
This work establishes dual design criteria for HTL-blended QD-LEDs: efficient hole transport and tolerance to local HTL/ETL electron leakage.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale Horizons
Design criteria for HTL-blended emissive layers in red quantum dot light-emitting diodes
This work establishes dual design criteria for HTL-blended QD-LEDs: efficient hole transport and tolerance to local HTL/ETL electron leakage.
- 20 October 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale Horizons
- Vol. 10 (11) , 2896-2907
Multifunctional electronic skin integrating dual-mode optical and pressure sensors for caregiving robots
Multifunctional robotic e-skin with vertically-integrated optical and pressure sensor arrays enables dual-mode operation for caregiving applications.
- 20 October 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale Horizons
- Vol. 10 (11) , 2896-2907
Multifunctional electronic skin integrating dual-mode optical and pressure sensors for caregiving robots
Multifunctional robotic e-skin with vertically-integrated optical and pressure sensor arrays enables dual-mode operation for caregiving applications.