An Experimental Setup with Radial Injection for Investigation of Transport and Deposition of Suspended Particles in Porous Media
Authors:
- Sadok FeiaSFSadok Feia
- Jean-Claude DuplaJDJean-Claude Dupla
- 10 November 2017
- journal article
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 40 (6) , 1115-1124
Abstract
A radial injection experimental setup is presented in this paper, which allows one to study the transport and deposition of suspended particles and permeability impairment in porous media. This setup allows one to simulate the conditions of the injection of produced water in oil reservoirs from an injection well. This is achieved by a radial injection of water containing suspended particles of a few microns in size from a central well including a sand screen, through a confined cylindrical sand pack (diameter 52 cm, height 40 cm). A peripheral drainage system permits the recovery of the fluid at the outlet of the sand pack by a collector equipped with a turbidimeter for measuring the concentration of suspended particles. The injection pressure is measured at the inlet, and six pore pressure probes have been installed at different locations inside the sand pack. First experimental results presented show a significant heterogeneity of deposited particle profiles in both radial and axial directions.Keywords
This publication has 16 references indexed in Scilit:
- Evolution of local friction along a model pile shaft in a calibration chamber for a large number of loading cyclesComptes Rendus Mécanique, 2013
- Permeability Reduction in Qishn Sandstone Specimens due to Particle Suspension InjectionTransport in Porous Media, 2009
- Particle Clogging in Radial Flow: Microscale MechanismsSPE Journal, 2006
- Concentration dependent transport of colloids in saturated porous mediaJournal of Contaminant Hydrology, 2006
- Formation Damage vs. Solid Particles Deposition Profile During Laboratory-Simulated Produced-Water ReinjectionSPE Journal, 2005
- Theoretical and experimental study of particle movement and deposition in porous media during water injectionJournal of Petroleum Science and Engineering, 2004
- Impairment by Suspended Solids Invasion: Testing and PredictionSPE Production & Facilities, 1993
- Suspended Solids Specifications for Water Injection From Coreflood TestsSPE Reservoir Engineering, 1988
- Transport of particulate suspensions in porous media: Model formulationAIChE Journal, 1987
- Measuring Water Quality and Predicting Well ImpairmentJournal of Petroleum Technology, 1972