WIND EFFECTS ON WAVE OVERTOPPING DISCHARGES AT DIKES AND BREAKWATERS WITH A CREST WALL
Authors:
- Marcel R.A. van GentMGMarcel R.A. van Gent
- Ruben J. van der BijlRBRuben J. van der Bijl
- Sam J. DijkstraSDSam J. Dijkstra
- Lars F. van VlietLVLars F. van Vliet
- Davide WüthrichDWDavide Wüthrich
Open Access
- 29 May 2025
- journal article
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 38,p. 6
Abstract
Estimates of wave overtopping generally determine the required crest level of coastal structures. Wind affects wave overtopping, especially for coastal structures with crest walls because these can cause a vertical wave motion above the crest that is susceptible to wind. Within the relevant range of overtopping discharges, the expected wave overtopping discharge at coastal structures with a crest wall can be up to 5 times larger than for situations without wind. For smaller discharges the influence factor for wind can be significantly larger. In the present study based on physical model tests the maximum influence of wind on wave overtopping discharges has been studied for (impermeable) dikes and (permeable) rubble mound breakwaters with crest walls. The influence of wind on wave overtopping is mainly determined by the magnitude of the overtopping discharge itself and by the height of the crest wall. The result of the study is a guideline to estimate the maximum influence of wind on wave overtopping at dikes and rubble mound breakwaters with a crest wall.Keywords
This publication has 18 references indexed in Scilit:
- Numerical modelling of wave overtopping discharges at rubble mound breakwaters using OpenFOAM®Coastal Engineering, 2022
- Wave overtopping discharges at rubble mound breakwaters including effects of a crest wall and a bermCoastal Engineering, 2022
- Numerical investigation of the effects of roughness, a berm and oblique waves on wave overtopping processes at dikesApplied Ocean Research, 2022
- Influence of oblique wave attack on wave overtopping at caisson breakwaters with sea and swell conditionsCoastal Engineering, 2021
- Influence of oblique wave attack on wave overtopping at smooth and rough dikes with a bermCoastal Engineering, 2020
- The influence of a berm and roughness on the wave overtopping at dikesCoastal Engineering, 2020
- Influence of oblique wave attack on wave overtopping and forces on rubble mound breakwater crest wallsCoastal Engineering, 2019
- Wave run-up and overtopping reduction by block revetments with enhanced roughnessCoastal Engineering, 2015
- Calibration of overtopping roughness factors for concrete armor units in non-breaking conditions using the CLASH databaseCoastal Engineering, 2015
- Overtopping performance of different armour units for rubble mound breakwatersCoastal Engineering, 2009