The effect of boronizing heat treatment on the slurry erosion of AISI 5117
- 7 August 2018
- journal article
- research article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 70 (7) , 1176-1186
Abstract
Purpose: This paper aims to clarify the relationship between the slurry erosion and one of the case hardening treatments, i.e. boronizing in this study, for AISI-5117 steel alloy. AISI-5117 steel alloy was used because of its variety applications in the field of submarine equipment. Most of the slurry erosion factors such as velocity, impact angle and mechanism of erosion were studied at different impact angles. Design/methodology/approach: At first, the samples were prepared and subjected to the boronizing treatment in controlled atmosphere. By using a slurry erosion test-rig, all experiments for studying the slurry erosion factors were carried out. Moreover, the studied specimens were investigated via scanning electron microscope, optical microscope and X-ray diffraction to study the erosion mechanism in the different conditions. Findings: It was expected that the boronization of the AISI-5117 steel would increase its slurry erosion resistance due to its positive impact on the surface hardness. However, the results observed show the opposite, where the boronization of AISI-5117 steel decreased its slurry erosion resistance as implied by the increase of the mass loss percentage at all impact angles. Originality/value: This research, for the first time, exhibits the effect of boronizing treatment on the slurry erosion in different impact factors accompanied by the erosion mechanism at each impact angle.Keywords
This publication has 34 references indexed in Scilit:
- Stepwise Erosion as a Method for Investigating the Wear Mechanisms at Different Impact Angles in Slurry ErosionJournal of Tribology, 2014
- Effect of Impact Angle on Slurry Erosion Behavior and Mechanisms of Carburized AISI 5117 SteelJournal of Tribology, 2013
- Principles and Applications to Tribology2013
- Tribological study of boron nitride filmsDiamond and Related Materials, 2010
- Properties and Characterization of Hard Coatings Obtained by Boriding: An OverviewDefect and Diffusion Forum, 2010
- Design and Performance of Slurry Erosion TesterJournal of Tribology, 2010
- Kinetics of the formation of Fe2B layers in gray cast iron: Effects of boron concentration and boride incubation timeApplied Surface Science, 2009
- Characterization of boronized layers on a XC38 steelSurface and Coatings Technology, 2006
- Abrasive wear resistance of boronized carbon and low-alloy steelsJournal of Materials Processing Technology, 2006
- The effects of conventional heat treatment and boronizing on abrasive wear and corrosion of SAE 1010, SAE 1040, D2 and 304 steelsTribology International, 2003