Micropitting Performance of Oil Additives in Lubricated Rolling Contacts
Authors:
- V. BrizmerVBV. Brizmer
- H. R. PasaribuHPH. R. Pasaribu
- G. E. Morales-EspejelGMG. E. Morales-Espejel
- 19 June 2013
- journal article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 56 (5) , 739-748
Abstract
International audienceIn the present study, an existing theoretical micropitting model, based on the competitive interaction between surface fatigue and mild polishing wear, is employed to predict the effects of different base oil/additive solutions and the relative humidity of the environment on micropitting damage. These effects, though expected to be tribochemical in nature, manifest themselves mechanically; for example, by possibly affecting the fatigue strength of the surface and increasing or reducing the boundary friction and/or the mild wear rate, which altogether may cause an appreciable influence on the degree of micropitting. The present model takes into account only the last two issues (i.e., the change in boundary friction and wear) due to the presence of additives; nevertheless, it is able to predict their performance under micropitting conditions in most cases, showing good agreement with the corresponding experimental data. The results of the present work establish the basis of a blueprint for selecting oil additives for bearing applicationsKeywords
This publication has 10 references indexed in Scilit:
- Effect of water on ZDDP anti-wear performance and related tribochemistry in lubricated steel/steel pure sliding contactsTribology International, 2012
- The Composition of Reaction Layers on Rolling Bearings Lubricated with Gear Oils and Its Correlation with Rolling Bearing PerformanceTribology Transactions, 2012
- Micropitting Modelling in Rolling–Sliding Contacts: Application to Rolling BearingsTribology Transactions, 2011
- The influence of base oil polarity and slide–roll ratio on additive-derived reaction layer formationProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2011
- The Effect of a Friction Modifier Additive on MicropittingTribology Transactions, 2009
- Effect of lubricants on micropitting and wearTribology International, 2008
- Assessment of the factors influencing micropitting in rolling/sliding contactsWear, 2005
- An additive's influence on the pitting and wear of ball bearing steelWear, 1996
- An Experimental Investigation of Micropitting Using a Roller Disk MachineTribology Transactions, 1995
- Effect of extreme-pressure additives on rolling bearing fatigue lifeJournal of Physics D: Applied Physics, 1992