Recentering Shape Memory Alloy Passive Damper for Structural Vibration Control
Authors:
Open Access
- 28 November 2013
- journal article
- research article
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2013, 1-13
Abstract
This paper presents a preliminary study on the evaluation of an innovative energy dissipation system with shape memory alloys (SMAs) for structural seismic protection. A recentering shape memory alloy damper (RSMAD), in which superelastic nitinol wires are utilized as energy dissipation components, is proposed. Improved constitutive equations based on Graesser and Cozzarelli model are proposed for superelastic nitinol wires used in the damper. Cyclic tensile-compressive tests on the damper with various prestrain under different loading frequencies and displacement amplitudes were conducted. The results show that the hysteretic behaviors of the damper can be modified to best fit the needs for passive structural control applications by adjusting the pretension of the nitinol wires, and the damper performance is not sensitive to frequencies greater than 0.5 Hz. To assess the effectiveness of the dampers for structural seismic protection, nonlinear time history analysis on a ten-story steel frame with and without the dampers subjected to representative earthquake ground motions was performed. The simulation results indicate that superelastic SMA dampers are effective in mitigating the structural response of building structures subjected to strong earthquakes.Keywords
Funding Information
- National Natural Science Foundation of China (51108426, 41104106, 20100471008, 20104101120009)
- National Natural Science Foundation of China (51108426, 41104106, 20100471008, 20104101120009)
- China Postdoctoral Science Foundation (51108426, 41104106, 20100471008, 20104101120009)
- Research Fund for the Doctoral Program of Higher Education of China (51108426, 41104106, 20100471008, 20104101120009)
This publication has 27 references indexed in Scilit:
- A shape memory alloy-based reusable hysteretic damper for seismic hazard mitigationSmart Materials and Structures, 2007
- A one-dimensional strain-rate-dependent constitutive model for superelastic shape memory alloysSmart Materials and Structures, 2007
- Limitations of height-to-width ratio for base-isolated buildings under earthquakeThe Structural Design of Tall and Special Buildings, 2006
- Shaking table tests on reinforced concrete frames without and with passive control systemsEarthquake Engineering & Structural Dynamics, 2005
- Unseating prevention for multiple frame bridges using superelastic devicesSmart Materials and Structures, 2005
- Vibration mitigation of a stay cable with one shape memory alloy damperStructural Control and Health Monitoring, 2004
- Passive control technologies for seismic‐resistant buildings in EuropeProgress in Structural Engineering and Materials, 2001
- A thermodynamical constitutive model for shape memory materials. Part I. The monolithic shape memory alloyInternational Journal of Plasticity, 1996
- Micromechanics modelling for the constitutive behavior of polycrystalline shape memory alloys—II. Study of the individual phenomenaJournal of the Mechanics and Physics of Solids, 1993
- One-Dimensional Thermomechanical Constitutive Relations for Shape Memory MaterialsJournal of Intelligent Material Systems and Structures, 1990