Defluoridation of Water Using Cu-Mg-Binary-Metal-Oxide-Coated Sand
Open Access
Abstract
Defluoridation of water was evaluated using a copper–magnesium (Cu-Mg) coated sand (CMCS) as a sustainable adsorbent containing binary metal oxides. The CMCS sorbent coating contained mostly amorphous copper and magnesium oxides in the Cu-Mg coating on the crystalline sand surface. Pseudo-second-order kinetics was observed where most fluoride was removed rapidly within an hour. Favorable adsorption occurred according to the Langmuir and Freundlich adsorption equations, while physisorption occurred according to the Dubinin–Radushkevich (D-R) adsorption equation. The adsorption capacity of the CMCS sorbent based on sorbent surface was similar to various other adsorbents with larger adsorbent surface areas, likely due to the efficacy of the Cu-Mg coating despite the CMCS sorbent’s much smaller surface area. Fluoride was adsorbed effectively from pH 3 to pH 11 through adsorption of anionic fluoride onto the CMCS sorbent’s protonated surface with a pHPZC of 10.5, indicative of electrostatic attraction as the main adsorption mechanism. The CMCS sorbent’s re-coating was conducive to successful recycling and reuse of the CMCS sorbent as a sustainable adsorbent for water defluoridation.Keywords
Funding Information
- University of Illinois Chicago
This publication has 39 references indexed in Scilit:
- Efficient fluoride removal using Al-Cu oxide nanoparticles supported on steel slag industrial waste solidEnvironmental Science and Pollution Research, 2017
- Removal of fluoride from drinking water using aluminum hydroxide coated activated carbon prepared from bark of Morinda tinctoriaApplied Water Science, 2016
- Fluoride removal from aqueous solution by Al(III)–Zr(IV) binary oxide adsorbentApplied Surface Science, 2015
- A review on adsorbents used for defluoridation of drinking waterReviews in Environmental Science and Bio/Technology, 2014
- Sources and toxicity of fluoride in the environmentResearch on Chemical Intermediates, 2012
- Chitosan based mesoporous Ti–Al binary metal oxide supported beads for defluoridation of waterChemical Engineering Journal, 2010
- Adsorption of fluoride from aqueous solution by magnesia‐amended silicon dioxide granulesJournal of Chemical Technology & Biotechnology, 2009
- Enhanced fluoride removal from drinking water by magnesia-amended activated alumina granulesChemical Engineering Journal, 2008
- Investigations on the column performance of fluoride adsorption by activated alumina in a fixed-bedChemical Engineering Journal, 2004
- Assessment of exposure to chemical contaminants in water and foodScience of The Total Environment, 1995