Evaluation of machining performance and multi criteria optimization of novel metal-Nimonic 80A using EDM
Open Access
- 12 February 2021
- journal article
- research article
- Published by Springer Nature in SN Applied Sciences
- Vol. 3 (3) , 1-10
Abstract
This study focused to machine novel Nimonic 80A through Electric Discharge Machine process. The process parameters are optimised to achieve high surface integrity along with high material removal rate (MRR) with minimum energy consumption. Central composite design along with analysis of variance technique has been applied to make correlation between the process parameter and responses. The developed model of surface roughness shows that the peak current and pulse-on time have significant effect whereas; a little effect of pulse-off time. The said result may be obtained due to simultaneous action of deposition and notching (removal) of material in order to form crater. In case of MRR, the pulse-on time and peak current are found as significant factors with increasing trend (i.e. when the input values are increased the MRR increases) whereas; a reverse trend is noticed with pulse-off time. The optimum values for maximum MRR (0.512444 gm/min) and minimum surface roughness (7.82203 µm) with 81% desirability are obtained for the process parameter as 13.49 A peak current, 150 µs pulse-on time and 4 µs pulse-off time.Keywords
This publication has 21 references indexed in Scilit:
- Parametric study along with selection of optimal solutions in dry wire cut machining of cemented tungsten carbide (WC-Co)Journal of Manufacturing Processes, 2013
- A DEA Approach for Optimization of Multiple Responses in Electrical Discharge Machining of AISI D2 SteelProcedia Engineering, 2013
- Analysis of micro-cracks on machined surfaces in dry electrical discharge machiningJournal of Manufacturing Processes, 2012
- Optimization of Abrasive Powder Mixed EDM of Aluminum Matrix Composites with Multiple Responses Using Gray Relational AnalysisJournal of Materials Engineering and Performance, 2011
- Intelligent process modeling and optimization of die-sinking electric discharge machiningApplied Soft Computing, 2011
- Effects of wire-EDM machining variables on surface roughness of newly developed DC 53 die steel: Design of experiments and regression modelJournal of Materials Processing Technology, 2007
- Numerical study of thermal aspects of electric discharge machining processInternational Journal of Machine Tools and Manufacture, 2006
- Some investigations into the electric discharge machining of hardened tool steel using different electrode materialsJournal of Materials Processing Technology, 2004
- The energy aspect of material property in WEDM and its applicationJournal of Materials Processing Technology, 2004
- On the effect of electrodischarge machining parameters on the fatigue life of AISI D6 tool steelJournal of Materials Processing Technology, 1997