Development of an analytical model to investigate temperature distribution and melt geometry in the laser powder bed fusion process under different operating parameters
- 2 December 2024
- journal article
- research article
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 37 (1)
Abstract
Laser powder bed fusion (L-PBF) fabricates components by melting layers of metal powder. Consequently, it has the potential to induce interparticle air gaps or generate unpredictable stresses. As such, understanding temperature distribution and predicting the melt pool based on process parameters are essential. While numerous numerical studies in the literature aim to determine these parameters, these numerical estimation methods often demand extensive computational time and powerful processors. This study introduces a new analytical model and a solution method, offering a significantly faster and more precise solution compared to numerical approaches. Furthermore, the developed model allows the identification of liquid and solid phase regions within the part during production, along with insights into the phase region changes over time. Eigenfunction expansion, separation of variables, and variable transformation methods were employed in the analytical solution of the model equations. Results obtained from this method have been validated by experimental studies available in the literature. By utilizing the derived solution function, the L-PBF process was parametrically investigated, revealing temperature distributions and melt pool geometries. The parametric study focused on the laser power, spot size, and powder layer thicknesses as variable parameters. The study determined that a 50 W increase in laser power raises the maximum melt pool temperature by an average of 800 K, and laser power has been identified as the most influential parameter affecting temperature distribution and melt pool geometry.Keywords
This publication has 17 references indexed in Scilit:
- An analytical model for rapid predicting molten pool geometry of selective laser melting (SLM)Applied Mathematical Modelling, 2021
- High deposition rate approach of selective laser melting through defocused single bead experiments and thermal finite element analysis for Ti-6Al-4VAdditive Manufacturing, 2020
- Identification of a suitable volumetric heat source for modelling of selective laser melting of Ti6Al4V powder using numerical and experimental validation approachThe International Journal of Advanced Manufacturing Technology, 2018
- A semi-analytical thermal modelling approach for selective laser meltingAdditive Manufacturing, 2018
- Influence of processing parameters on the evolution of melt pool, porosity, and microstructures in Ti-6Al-4V alloy parts fabricated by selective laser meltingProgress in Additive Manufacturing, 2017
- Heat transfer and phase transition in the selective laser melting processInternational Journal of Heat and Mass Transfer, 2017
- Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) process with aluminium alloy 6061International Journal of Heat and Mass Transfer, 2015
- Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processesAdditive Manufacturing, 2014
- A pragmatic model for selective laser melting with evaporationActa Materialia, 2009
- Development of a finite element based heat transfer model for conduction mode laser spot welding process using an adaptive volumetric heat sourceInternational Journal of Thermal Sciences, 2009