Bend‐bend‐twist vibrations of a wind turbine blade
Authors:
- 29 September 2017
- journal article
- research article
- Published by Wiley in Wind Energy
- Vol. 21 (1) , 15-28
Abstract
Dynamics of a wind turbine blade under bend‐bend‐twist coupled vibrations is investigated. The potential and kinetic energy expressions for a straight nonuniform blade are written in terms of beam parameters. Then, the energies are expressed in terms of modal coordinates by using the assumed mode method, and the equations of motion are found by applying Lagrange's formula. The bend‐bend‐twist equations are coupled with each other and have stiffness variations due to centrifugal effects and gravitational parametric terms, which vary cyclicly with the hub angle. To determine the natural frequencies and mode shapes of the system, a modal analysis is applied on the linearized coupled equations of constant angle snapshots of a blade with effects of constant speed rotation. Lower modes of the coupled bend‐bend‐twist model are dominantly in‐plane or out‐of‐plane modes. To investigate the parametric effects, several blade models are analyzed at different angular positions. The stiffness terms involving centrifugal and gravitational effects can be significant for long blades. To further see the effect of blade length on relative parametric stiffness change, the blade models are scaled in size and analyzed at constant rotational speeds, at horizontal and vertical orientations. These studies show that the parametric stiffness effects should be taken into account when designing long blades.Keywords
Funding Information
- National Science Foundation (CMMI-1335177)
This publication has 23 references indexed in Scilit:
- Nonlinear Vibration Analysis of the Wind Turbine Blade (Occurrence of the Superharmonic Resonance in the Out of Plane Vibration of the Elastic Blade)Journal of Vibration and Acoustics, 2012
- Output-only modal analysis of linear time-periodic systems with application to wind turbine simulation dataMechanical Systems and Signal Processing, 2011
- Vibration of aWind Turbine Blade (Theoretical Analysis and Experiment Using a Single Rigid Blade Model)Journal of Environment and Engineering, 2009
- Mechanical Domain Parametric AmplificationJournal of Vibration and Acoustics, 2008
- Equations of motion for a rotor blade, including gravity, pitch action and rotor speed variationsWind Energy, 2007
- Frequency Analysis of a Rotating Cantilever Beam Using Assumed Mode Method with Coupling Effect#Mechanics Based Design of Structures and Machines, 2006
- FREE VIBRATION OF CENTRIFUGALLY STIFFENED UNIFORM AND TAPERED BEAMS USING THE DYNAMIC STIFFNESS METHODJournal of Sound and Vibration, 2000
- VIBRATION ANALYSIS OF ROTATING CANTILEVER BEAMSJournal of Sound and Vibration, 1998
- On coupled bending and torsional vibration of uniform beamsJournal of Sound and Vibration, 1989
- An exact solution for coupled bending and torsion vibrations of uniform beams having single cross-sectional symmetryJournal of Sound and Vibration, 1987