A new approach to controlling a hydraulic indirect elevator with a variable-speed pump
Open Access
- 4 March 2023
- journal article
- research article
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 23 (2) , 1-14
Abstract
The paper describes a new approach to the issue of controlling an indirect elevator with a bidirectional variable-speed pump and a simple controller based on the position sensor. The aim of this paper is to present a method of controlling the speed of the elevator to ensure smooth movement and proper positioning of the car on the floor, regardless of its load and ropes rigidity. The main feature of the proposed solution is the use of a frequency inverter in vector mode to control the speed of the car in both directions. The control function is based on virtual cams comparing actual measurements from the car position sensor. The proposed control strategy has been experimentally verified on the existing indirect elevator drive, and the obtained results indicate a very high accuracy in maintaining and shaping the speed and positioning of the car. The conducted research confirms the possibility of using a new method of controlling hydraulic and indirect elevators. The benefits of this method include a less complex hydraulic system, the control of overloads in the car and vibrations in the rope system, and the possibility of energy recovery.Keywords
This publication has 28 references indexed in Scilit:
- An efficient architecture for energy recovery in hydraulic elevatorsInternational Journal of Fluid Power, 2015
- Design and implementation of hydraulic motor based elevator system2014
- Efficiency analysis and evaluation of energy-saving pressure-compensated circuit for hybrid hydraulic excavatorAutomation in Construction, 2014
- Improved Performance in a Supercapacitor-Based Energy Storage Control System with Bidirectional DC-DC Converter for Elevator Motor Drives2014
- Improvement of boom control performance for hybrid hydraulic excavator with potential energy recoveryAutomation in Construction, 2013
- Research on the energy regeneration systems for hybrid hydraulic excavatorsAutomation in Construction, 2010
- Comparison of energy-saving on the speed control of the VVVF hydraulic elevator with and without the pressure accumulatorMechatronics, 2005
- Nonlinear robust control of a hydraulic elevator: experiment-based modeling and two-stage Lyapunov redesignControl Engineering Practice, 2005
- Computational simulation and experimental research on speed control of VVVF hydraulic elevatorControl Engineering Practice, 2004
- Electro-hydraulic proportional control of twin-cylinder hydraulic elevatorsControl Engineering Practice, 2001