Justyna Skowrońska
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Justyna Skowrońska has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Andrzej Kosucki
Lodz University of Technology
12 shared publications - Łukasz Stawiński
Lodz University of Technology
12 shared publications - Piotr Malenta
Institute of Machine Tools and Production Engineering, Faculty of Mechanical Engineering, Lodz University of Technology, Stefanowskiego 1/15, 90-924 Lodz, Poland
3 shared publications - Adrian Morawiec
Faculty of Mechanical Engineering, Institute of Machine Tools and Production Engineering, Lodz University of Technology, Lodz, Poland
2 shared publications Jakub Zaczyński
Politechnika Łódzka
2 shared publications- Paweł Grzejszczyk2 shared publications
Latest Publications
- Open Access
- 10 July 2026
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
- Vol. 29 (1)
Investigation of the Influence of Hydraulic Oil Temperature on the Variable Speed Fixed Displacement Piston Pump Performance
This paper investigates the influence of hydraulic oil temperature on the performance of a piston pump. The primary objective of the study was to determine variations in volumetric efficiency by developing operational maps under different thermal conditions, system pressures, and rotational speeds. The experiments were conducted on a laboratory test stand equipped with a fixed‑displacement piston pump driven by a electric motor. Measurement signals were processed using LabVIEW software, enabling the generation of efficiency maps across a wide operating range. The results highlight the strong dependence of pump efficiency on the temperature of the working fluid, particularly at low speeds and elevated pressures. The developed maps provide valuable insights into the operating boundaries of the pump, offering practical guidance for both system design and operational planning. The findings emphasize that temperature‑dependent characteristics constitute a crucial source of information for ensuring high efficiency, durability, and reliability of hydraulic systems employing piston pumps.
- 10 July 2026
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
- Vol. 29 (1)
Open AccessInvestigation of the Influence of Hydraulic Oil Temperature on the Variable Speed Fixed Displacement Piston Pump Performance
This paper investigates the influence of hydraulic oil temperature on the performance of a piston pump. The primary objective of the study was to determine variations in volumetric efficiency by developing operational maps under different thermal conditions, system pressures, and rotational speeds. The experiments were conducted on a laboratory test stand equipped with a fixed‑displacement piston pump driven by a electric motor. Measurement signals were processed using LabVIEW software, enabling the generation of efficiency maps across a wide operating range. The results highlight the strong dependence of pump efficiency on the temperature of the working fluid, particularly at low speeds and elevated pressures. The developed maps provide valuable insights into the operating boundaries of the pump, offering practical guidance for both system design and operational planning. The findings emphasize that temperature‑dependent characteristics constitute a crucial source of information for ensuring high efficiency, durability, and reliability of hydraulic systems employing piston pumps.
- 18 October 2025
- Published by Springer Nature
- p. 425-434
The Influence of Applied Surface Modifications of a double-Acting Hydraulic Actuator on the Sealing Condition
- 18 October 2025
- Published by Springer Nature
- p. 425-434
The Influence of Applied Surface Modifications of a double-Acting Hydraulic Actuator on the Sealing Condition
- 18 October 2025
- Published by Springer Nature
- p. 229-240
Comparative Study of Scissor Lift Drive Systems
- 18 October 2025
- Published by Springer Nature
- p. 229-240
Comparative Study of Scissor Lift Drive Systems
- Open Access
Energy Efficiency Improvement of Hydraulic Indirect Elevator
This article addresses the current issue of energy consumption in the hydraulic drive systems of working machines, with particular emphasis on elevators. This paper describes the results of experimental comparative research and estimation of energy and time consumption for two drive systems of a hydraulic indirect elevator. The purpose of this article is to compare the energy consumption of a typical multi-valve system (MV) system with that of an innovative new electro-hydraulic drive (EHD) system with a variable speed pump. The EHD system uses a frequency converter with an energy recovery module to control the speed of the car in both directions and the return of potential energy during the lowering cycle. The comparison of these drive systems was performed under the same conditions, realizing the same elevator work cycles. This paper proposes methods for estimating the energy consumption of an MV system based on measurement data collected during an experiment. The results indicate that the EHD system was less energy-intensive, even at below 60%. The smaller the load mass, the shorter the operating time of the EHD system compared to the MV system. The introduced coefficients defining the energy consumption per unit of mass and payload displacement showed more than twice the decrease in energy demand during lifting and energy recovery possibility during lowering. The EHD system provides the same coefficient values regardless of the distance traveled, which makes it a predictable system, in contrast to the MV system, especially during lowering cycles. The benefits of the EHD also include a less complex hydraulic system (elimination of most valves).
Open AccessEnergy Efficiency Improvement of Hydraulic Indirect Elevator
This article addresses the current issue of energy consumption in the hydraulic drive systems of working machines, with particular emphasis on elevators. This paper describes the results of experimental comparative research and estimation of energy and time consumption for two drive systems of a hydraulic indirect elevator. The purpose of this article is to compare the energy consumption of a typical multi-valve system (MV) system with that of an innovative new electro-hydraulic drive (EHD) system with a variable speed pump. The EHD system uses a frequency converter with an energy recovery module to control the speed of the car in both directions and the return of potential energy during the lowering cycle. The comparison of these drive systems was performed under the same conditions, realizing the same elevator work cycles. This paper proposes methods for estimating the energy consumption of an MV system based on measurement data collected during an experiment. The results indicate that the EHD system was less energy-intensive, even at below 60%. The smaller the load mass, the shorter the operating time of the EHD system compared to the MV system. The introduced coefficients defining the energy consumption per unit of mass and payload displacement showed more than twice the decrease in energy demand during lifting and energy recovery possibility during lowering. The EHD system provides the same coefficient values regardless of the distance traveled, which makes it a predictable system, in contrast to the MV system, especially during lowering cycles. The benefits of the EHD also include a less complex hydraulic system (elimination of most valves).
- 5 September 2024
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
- Vol. 27 (1)
Data-driven operational pressure estimation for hydraulic actuators fed by fixed displacement pump with variable speed
The paper provides the estimation method of the pressure level in the hydraulic drive with actuator fed by variable speed fixed displacement pump (VSFD). The experimental tests were conducted using a typical speed shape in working cycle of the exemplary machine as is the hydraulic indirect elevator. The different piston rod loads and speeds were applied to measure the wide range of pressure values. Obtained data allowed to determine the two-variable estimation functions describing the cylinder inlet pressure values. Pressure mapping quality factors, as the measures of estimation inaccuracy, were introduced. The pressure estimation methods provided satisfactory results in whole range of data. The developed methods allow to support for rapid estimation of operational pressures for hydraulic drives with VSFD pumps, thereby improving the reliability and safety of these systems. Obtained factors can be used in modelling the hydraulic systems and simulations. Further analysis can provide the information for the manufacturers to optimize the hydraulic element sizes.
- 5 September 2024
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
- Vol. 27 (1)
Data-driven operational pressure estimation for hydraulic actuators fed by fixed displacement pump with variable speed
The paper provides the estimation method of the pressure level in the hydraulic drive with actuator fed by variable speed fixed displacement pump (VSFD). The experimental tests were conducted using a typical speed shape in working cycle of the exemplary machine as is the hydraulic indirect elevator. The different piston rod loads and speeds were applied to measure the wide range of pressure values. Obtained data allowed to determine the two-variable estimation functions describing the cylinder inlet pressure values. Pressure mapping quality factors, as the measures of estimation inaccuracy, were introduced. The pressure estimation methods provided satisfactory results in whole range of data. The developed methods allow to support for rapid estimation of operational pressures for hydraulic drives with VSFD pumps, thereby improving the reliability and safety of these systems. Obtained factors can be used in modelling the hydraulic systems and simulations. Further analysis can provide the information for the manufacturers to optimize the hydraulic element sizes.
- 26 September 2023
- Published by Springer Nature
- p. 258-268
Stand for Testing Hydraulic Actuators with Modified Working Surfaces
- 26 September 2023
- Published by Springer Nature
- p. 258-268
Stand for Testing Hydraulic Actuators with Modified Working Surfaces
- Open Access
- 4 March 2023
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 23 (2) , 1-14
A new approach to controlling a hydraulic indirect elevator with a variable-speed pump
The paper describes a new approach to the issue of controlling an indirect elevator with a bidirectional variable-speed pump and a simple controller based on the position sensor. The aim of this paper is to present a method of controlling the speed of the elevator to ensure smooth movement and proper positioning of the car on the floor, regardless of its load and ropes rigidity. The main feature of the proposed solution is the use of a frequency inverter in vector mode to control the speed of the car in both directions. The control function is based on virtual cams comparing actual measurements from the car position sensor. The proposed control strategy has been experimentally verified on the existing indirect elevator drive, and the obtained results indicate a very high accuracy in maintaining and shaping the speed and positioning of the car. The conducted research confirms the possibility of using a new method of controlling hydraulic and indirect elevators. The benefits of this method include a less complex hydraulic system, the control of overloads in the car and vibrations in the rope system, and the possibility of energy recovery.
- 4 March 2023
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 23 (2) , 1-14
Open AccessA new approach to controlling a hydraulic indirect elevator with a variable-speed pump
The paper describes a new approach to the issue of controlling an indirect elevator with a bidirectional variable-speed pump and a simple controller based on the position sensor. The aim of this paper is to present a method of controlling the speed of the elevator to ensure smooth movement and proper positioning of the car on the floor, regardless of its load and ropes rigidity. The main feature of the proposed solution is the use of a frequency inverter in vector mode to control the speed of the car in both directions. The control function is based on virtual cams comparing actual measurements from the car position sensor. The proposed control strategy has been experimentally verified on the existing indirect elevator drive, and the obtained results indicate a very high accuracy in maintaining and shaping the speed and positioning of the car. The conducted research confirms the possibility of using a new method of controlling hydraulic and indirect elevators. The benefits of this method include a less complex hydraulic system, the control of overloads in the car and vibrations in the rope system, and the possibility of energy recovery.
- Open Access
Energy Efficiency and Limitations of the Methods of Controlling the Hydraulic Cylinder Piston Rod under Various Load Conditions
The article is an overview of various methods of braking and controlling the movement of the piston rod under various load conditions. The purpose of this review is to systematize the state of the art in terms of efficiency, energy consumption and limitations of each method. The article discusses systems with different types of hydraulic actuators, operating under passive, active and variable load during the duty cycle of the piston rod. The existing literature was analysed in terms of applicability, reduction of energy consumption of the systems and even the possibility of energy return. Attention was paid to the costs and the need for additional power sources, as well as the problems and limitations of the presented methods. Based on the simulation model, energy consumption tests were carried out in systems with an actuator loaded with a variable force. There is a comparison of all methods in terms of actuator type, load, energy consumption and the possibility of energy recovery.
Open AccessEnergy Efficiency and Limitations of the Methods of Controlling the Hydraulic Cylinder Piston Rod under Various Load Conditions
The article is an overview of various methods of braking and controlling the movement of the piston rod under various load conditions. The purpose of this review is to systematize the state of the art in terms of efficiency, energy consumption and limitations of each method. The article discusses systems with different types of hydraulic actuators, operating under passive, active and variable load during the duty cycle of the piston rod. The existing literature was analysed in terms of applicability, reduction of energy consumption of the systems and even the possibility of energy return. Attention was paid to the costs and the need for additional power sources, as well as the problems and limitations of the presented methods. Based on the simulation model, energy consumption tests were carried out in systems with an actuator loaded with a variable force. There is a comparison of all methods in terms of actuator type, load, energy consumption and the possibility of energy recovery.
- Open Access
Overview of Materials Used for the Basic Elements of Hydraulic Actuators and Sealing Systems and Their Surfaces Modification Methods
The article is an overview of various materials used in power hydraulics for basic hydraulic actuators components such as cylinders, cylinder caps, pistons, piston rods, glands, and sealing systems. The aim of this review is to systematize the state of the art in the field of materials and surface modification methods used in the production of actuators. The paper discusses the requirements for the elements of actuators and analyzes the existing literature in terms of appearing failures and damages. The most frequently applied materials used in power hydraulics are described, and various surface modifications of the discussed elements, which are aimed at improving the operating parameters of actuators, are presented. The most frequently used materials for actuators elements are iron alloys. However, due to rising ecological requirements, there is a tendency to looking for modern replacements to obtain the same or even better mechanical or tribological parameters. Sealing systems are manufactured mainly from thermoplastic or elastomeric polymers, which are characterized by low friction and ensure the best possible interaction of seals with the cooperating element. In the field of surface modification, among others, the issue of chromium plating of piston rods has been discussed, which, due, to the toxicity of hexavalent chromium, should be replaced by other methods of improving surface properties.
Open AccessOverview of Materials Used for the Basic Elements of Hydraulic Actuators and Sealing Systems and Their Surfaces Modification Methods
The article is an overview of various materials used in power hydraulics for basic hydraulic actuators components such as cylinders, cylinder caps, pistons, piston rods, glands, and sealing systems. The aim of this review is to systematize the state of the art in the field of materials and surface modification methods used in the production of actuators. The paper discusses the requirements for the elements of actuators and analyzes the existing literature in terms of appearing failures and damages. The most frequently applied materials used in power hydraulics are described, and various surface modifications of the discussed elements, which are aimed at improving the operating parameters of actuators, are presented. The most frequently used materials for actuators elements are iron alloys. However, due to rising ecological requirements, there is a tendency to looking for modern replacements to obtain the same or even better mechanical or tribological parameters. Sealing systems are manufactured mainly from thermoplastic or elastomeric polymers, which are characterized by low friction and ensure the best possible interaction of seals with the cooperating element. In the field of surface modification, among others, the issue of chromium plating of piston rods has been discussed, which, due, to the toxicity of hexavalent chromium, should be replaced by other methods of improving surface properties.
- Open Access
Energy Consumption Structure and Its Improvement of Low-Lifting Capacity Scissor Lift
The article presents the experimental investigation of low-lifting capacity hydraulic scissor lift energy consumption. The analysis is based on experimental tests of two individual drives of the scissor lift: the conventional one and the variable-speed electro-hydraulic one. The investigation focuses on the study of the total energy consumption for lifting and lowering the scissor lift with different masses of transported cargo and also power consumptions of each element supplying these systems. Particular attention was paid to the significant impact of power supply on each control component as the main factor of reduction in the energetic efficiency of the low-lifting capacity scissor lift. A comparison of both drives indicated that the mass of transported cargo has a significant influence on the choice of the drive used. Results of the research show that significant energetic savings are obtained, as the modernized propulsion system consumes 67% energy of the standard one. A decrease in the percentage of energy losses with the increase in the mass handled led to the conclusion that the enhancement of propulsion systems in scissor lifts should be especially considered in machines carrying big loads.
Open AccessEnergy Consumption Structure and Its Improvement of Low-Lifting Capacity Scissor Lift
The article presents the experimental investigation of low-lifting capacity hydraulic scissor lift energy consumption. The analysis is based on experimental tests of two individual drives of the scissor lift: the conventional one and the variable-speed electro-hydraulic one. The investigation focuses on the study of the total energy consumption for lifting and lowering the scissor lift with different masses of transported cargo and also power consumptions of each element supplying these systems. Particular attention was paid to the significant impact of power supply on each control component as the main factor of reduction in the energetic efficiency of the low-lifting capacity scissor lift. A comparison of both drives indicated that the mass of transported cargo has a significant influence on the choice of the drive used. Results of the research show that significant energetic savings are obtained, as the modernized propulsion system consumes 67% energy of the standard one. A decrease in the percentage of energy losses with the increase in the mass handled led to the conclusion that the enhancement of propulsion systems in scissor lifts should be especially considered in machines carrying big loads.