A 0.6 V 12 b 10 MS/s Low-Noise Asynchronous SAR-Assisted Time-Interleaved SAR (SATI-SAR) ADC
Authors:
- 10 June 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 51 (8) , 1826-1839
Abstract
This paper presents an asynchronous SAR-assisted time-interleaved SAR (SATI-SAR) ADC as a suitable architecture in a low-supply-voltage condition. Settling-While-Conversion enabled by the Assist-ADC relaxes the DAC settling time requirement and makes it possible to insert a minimized capacitor shuffling logic with no speed penalty. A proposed gain-boosting dynamic pre-amplifier enhances the noise performance of the comparator and a self time-reference generation function is embedded in the pre-amplifier for a speed-enhanced asynchronous decision. A proposed dual-mode clock generator generates a low-jitter fixed-width sampling pulse for high-frequency operation while it generates a low-power-but-low-quality clock for low-frequency operation. With the dual-mode clock generator enabled, a prototype 65 nm CMOS 0.6 V 12 b 10 MS/s ADC achieves an ENOB of 10.4 at a Nyquist-rate input, and the peaks of DNL and INL are measured to be 0.24 LSB and 0.45 LSB, respectively. The FoM is 6.2 fJ/conversion-step with a power consumption of $83~\mu \text {W}$ . The ADC operates under the lowest supply voltage of 0.6 V among comparable designs with ENOBs over 10 and conversion rates over 1 MS/s.Keywords
Funding Information
- Center for Integrated Smart Sensors funded by the Ministry of Science, ICT & Future Planning as Global Frontier Project (CISS-2012M3A6A6054202)
This publication has 11 references indexed in Scilit:
- Low-Power Near-Threshold Design: Techniques to Improve Energy Efficiency Energy-efficient near-threshold design has been proposed to increase energy efficiency across a widIEEE Solid-State Circuits Magazine, 2015
- A Decision-Error-Tolerant 45 nm CMOS 7b 1 GS/s Nonbinary 2b/Cycle SAR ADCIEEE Journal of Solid-State Circuits, 2014
- A 1.5 mW 68 dB SNDR 80 Ms/s 2 $\times$ Interleaved Pipelined SAR ADC in 28 nm CMOSIEEE Journal of Solid-State Circuits, 2014
- A complementary dynamic residue amplifier for a 67 dB SNDR 1.36 mW 170 MS/s pipelined SAR ADC2014
- A 10b/12b 40 kS/s SAR ADC With Data-Driven Noise Reduction Achieving up to 10.1b ENOB at 2.2 fJ/Conversion-StepIEEE Journal of Solid-State Circuits, 2013
- A 0.5-V 5.2-fJ/Conversion-Step Full Asynchronous SAR ADC With Leakage Power Reduction Down to 650 pW by Boosted Self-Power Gating in 40-nm CMOSIEEE Journal of Solid-State Circuits, 2013
- An 88-dB Max-SFDR 12-bit SAR ADC With Speed-Enhanced ADEC and Dual RegistersIEEE Transactions on Circuits and Systems II: Express Briefs, 2013
- A 10-bit 50-MS/s SAR ADC With a Monotonic Capacitor Switching ProcedureIEEE Journal of Solid-State Circuits, 2010
- A 10-bit 500-KS/s low power SAR ADC with splitting comparator for bio-medical applications2009
- A low-noise self-calibrating dynamic comparator for high-speed ADCs2008