Manufacturing and characterization of open-cell aluminum foam by powder metallurgy
Authors:
- 17 October 2024
- journal article
- research article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 42 (1) , 93-105
Abstract
Metallic foams are classified into two groups based on their pore structure: closed and open pores. The variability of cell structures directly depends on the production method and the variability of parameters. Open – cell metallic foams are used as heat exchangers due to their large surface area, in filters and separators due to their properties such as high liquid/gas permeability and corrosion resistance, and in water purifiers to reduce the concentration of unwanted ions dissolved in water because they can provide liquid flow, and in silencers due to their sound absorbing feature. Due to their thermal conductivity, they are generally used in functional applications such as catalyst supports and flame arresters. In this study, open cell aluminum foams with different pore sizes were produced using the powder metallurgy method and polyurethane foam (PUF) replica technique. After the PUF model material of the foams was removed at 500 °C for 6 h, they were sintered at different temperatures such as 850, 900 and 950 °C for 6 h. Density measurement, XRD analysis, microstructure examination and compression testing were applied to the sintered open-cell foams. The highest pore ratio and compressive strength were determined in foams with a 20 ppi (porosity per inch) pore ratio sintered at 950 °C.Keywords
This publication has 14 references indexed in Scilit:
- Low-temperature synthesis of α-Al2O3 single crystal platelets by one-step thermal decomposition of Al-urea complexJournal of Thermal Analysis and Calorimetry, 2023
- Open‐Cell Aluminum Foams by the Sponge Replication Technique: A Starting Powder Particle StudyAdvanced Engineering Materials, 2020
- A novel method for making open cell aluminum foams by powder sintering processMaterials Letters, 2005
- Factors having influence on the rheological properties of Ti6A14V slurryJournal of Materials Science: Materials in Medicine, 2004
- On the Road Again: Metal Foams Find FavorPhysics Today, 2002
- Reaction bonding of open cell SiC-Al2O3 compositesMaterials Research Bulletin, 2001
- Manufacture, characterisation and application of cellular metals and metal foamsProgress in Materials Science, 2001
- Foam Metal: The RecipeEurophysics News, 1999
- Deformation characteristics of metal foamsJournal of Materials Science, 1998
- Ceramic foams by powder processingJournal of the European Ceramic Society, 1998