Co-pyrolysis of neem wood bark and low-density polyethylene: influence of plastic on pyrolysis product distribution and bio-oil characterization
- 13 July 2022
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (58) , 88213-88223
Abstract
In this study, the investigation on the effect of plastic during co-pyrolysis with biomass was carried out in a fixed reactor. Pyrolysis of neem wood bark (NB), low density polyethylene (LDPE) and their blends at different ratios was performed in order to evaluate the product distribution. The effects of reaction temperature and NB-to-LDPE blend ratio on product distribution and the chemical compositions of pyrolysis oil were examined. The co-pyrolysis of NB and LDPE increased the yield and quality of the bio-oil. The experiments were conducted under different LDPE addition percentages such as 20%, 40%, 50%, 60% and 80%. Under the optimum experimental condition of 60% addition of LDPE and a temperature of 450 °C, the maximum yield of bio-oil (64.8 wt%) and hydrocarbon (75.2%) was achieved with the lowest yield of oxygenated compounds. The calorific value of the co-pyrolysis oil was found to be higher than that of the NB pyrolysis oil. The relationship between NB and LDPE during co-pyrolysis was validated with the help of gas chromatography-mass spectrometry (GC–MS) analysis, which showed decreased oxygenated compounds.Keywords
All Related Versions
This publication has 48 references indexed in Scilit:
- Co-pyrolysis of LignoBoost® lignin with synthetic polymersPolymer Degradation and Stability, 2012
- Synergistic effects on co-pyrolysis of lignite and high-sulfur swelling coalJournal of Analytical and Applied Pyrolysis, 2012
- Co-pyrolysis of oil shale and plastics: Influence of pyrolysis parameters on the product yieldsFuel Processing Technology, 2012
- Pyrolysis of Woody Biomass for Sustainable Bio-oilEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2011
- TG study on pyrolysis of biomass and its three components under syngas☆Fuel, 2008
- Thermogravimetric characteristics and kinetic of plastic and biomass blends co-pyrolysisFuel Processing Technology, 2006
- Thermal degradation of PE and PS mixed with ABS-Br and debromination of pyrolysis oil by Fe- and Ca-based catalystsPolymer Degradation and Stability, 2004
- Thermal degradation of cellulose derivatives/starch blends and sisal fibre biocompositesPolymer Degradation and Stability, 2004
- Co-pyrolysis of wood biomass and synthetic polymer mixtures. Part I: influence of experimental conditions on the evolution of solids, liquids and gasesJournal of Analytical and Applied Pyrolysis, 2002
- Kinetic study on pyrolytic process of oil-palm solid waste using two-step consecutive reaction modelBiomass and Bioenergy, 2001