Chandrasekaran Sowmya Dhanalakshmi
Research Subjects
Chandrasekaran Sowmya Dhanalakshmi has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Petchimuthu Madhu
Department of Mechanical Engineering, Karpagam College of Engineering, Coimbatore, India
11 shared publications Pravin P. Patil
Department of Mechanical Engineering
5 shared publications- Habtewolde Ababu Birhanu
Faculty of Mechanical Engineering, Arba Minch Institute of Technology, Arba Minch University, P.O. Box 21, Arba Minch, Ethiopia
3 shared publications - Joshua Stephen Chellakumar Isaac JoshuaRamesh Lalvani
Faculty of Mechanical Engineering, Arba Minch Institute of Technology, Arba Minch University, Arba Minch, Ethiopia
3 shared publications - Seeniappan Kaliappan
Department of Mechanical Engineering, KCG College of Technology, Chennai, India
3 shared publications Aditya Kumar
Department of Mechanical Engineering, Netaji Subhash University of Technology, New Delhi 110078, India
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 98 (2)
Impact of Dual-Fiber Reinforcement on the Mechanical and Thermal Properties of Vinylester Composites
Rising ecological concerns over synthetic fibers and petrochemical polymers have accelerated the search for sustainable alternatives in composite development. This study investigates a novel hybrid vinyl ester (VIE) composite reinforced with Borassus flabellifer and Cocos nucifera fibers at varying loadings (10–30 wt%). The composites were fabricated and systematically characterized for their mechanical, thermal, and moisture resistance properties. Results revealed that the 30 wt% hybrid composite exhibited the highest property enhancements, with tensile strength improving from 6 MPa (neat VIE) to 24 MPa, flexural strength from 238 MPa to 566 MPa, impact resistance from 6 kJ/m² to 34 kJ/m², and hardness from 9 HRB to 67 HRB. Thermogravimetric analysis demonstrated enhanced thermal stability, indicating better resistance to thermal degradation. Water absorption studies confirmed reduced moisture uptake compared to neat VIE, highlighting the improved interfacial bonding between fibers and matrix. These findings demonstrate that Borassus flabellifer and Cocos nucifera fibers effectively enhance the physico-chemical performance of VIE, making the hybrid composites suitable for diverse structural and functional applications in aerospace, automotive, marine, and sports equipment industries.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 98 (2)
Open AccessImpact of Dual-Fiber Reinforcement on the Mechanical and Thermal Properties of Vinylester Composites
Rising ecological concerns over synthetic fibers and petrochemical polymers have accelerated the search for sustainable alternatives in composite development. This study investigates a novel hybrid vinyl ester (VIE) composite reinforced with Borassus flabellifer and Cocos nucifera fibers at varying loadings (10–30 wt%). The composites were fabricated and systematically characterized for their mechanical, thermal, and moisture resistance properties. Results revealed that the 30 wt% hybrid composite exhibited the highest property enhancements, with tensile strength improving from 6 MPa (neat VIE) to 24 MPa, flexural strength from 238 MPa to 566 MPa, impact resistance from 6 kJ/m² to 34 kJ/m², and hardness from 9 HRB to 67 HRB. Thermogravimetric analysis demonstrated enhanced thermal stability, indicating better resistance to thermal degradation. Water absorption studies confirmed reduced moisture uptake compared to neat VIE, highlighting the improved interfacial bonding between fibers and matrix. These findings demonstrate that Borassus flabellifer and Cocos nucifera fibers effectively enhance the physico-chemical performance of VIE, making the hybrid composites suitable for diverse structural and functional applications in aerospace, automotive, marine, and sports equipment industries.
- 20 November 2025
- Published by Springer Nature
- p. 425-434
A Sustainability Framework for Dealing Infectious Plastic Wastes for Environmental Protection
- 20 November 2025
- Published by Springer Nature
- p. 425-434
A Sustainability Framework for Dealing Infectious Plastic Wastes for Environmental Protection
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 97 (2) , e20241284
Non-catalytic and catalytic co-pyrolysis of neem seed cake and plastic waste: an experimental investigation on product distribution, synergistic interaction and characterization
This investigation elucidates the co-pyrolysis of neem seed cake in combination with plastic waste across a spectrum of mass ratios namely, 0:1, 3:1, 2:1, 1:1, 1:2, 1:3, and 1:0 subjected to varying pyrolytic temperatures from 350°C to 650°C, employing a CuO catalyst as a facilitating agent. The research concentrated on elucidating the effect of reaction temperature and the blend ratio of neem seed cake to plastic waste on the distribution of products and the chemical composition of the resultant pyrolysis oil. The co-pyrolysis performed at a 1:2 ratio of neem seed cake to plastic waste yielded an optimal oil production of 69.4 wt% with maximum positive synergy of 6.25% at 500°C. The physicochemical characteristics of the resulting co-pyrolysis oil demonstrated a striking resemblance to those of conventional fossil diesel. Further analysis through FT-IR revealed the presence of a different range of aromatic components. Quantitative analysis utilizing chromatographic peak area evaluations was undertaken to elucidate the compositional profile of the pyrolysis oils, thereby accentuating the presence of synergistic effects. Furthermore, GC-MS analysis provided empirical validation of the interaction between neem seed cake and waste plastics during co-pyrolysis, as indicated by discernible decrease in the concentration of oxygenated compounds.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 97 (2) , e20241284
Open AccessNon-catalytic and catalytic co-pyrolysis of neem seed cake and plastic waste: an experimental investigation on product distribution, synergistic interaction and characterization
This investigation elucidates the co-pyrolysis of neem seed cake in combination with plastic waste across a spectrum of mass ratios namely, 0:1, 3:1, 2:1, 1:1, 1:2, 1:3, and 1:0 subjected to varying pyrolytic temperatures from 350°C to 650°C, employing a CuO catalyst as a facilitating agent. The research concentrated on elucidating the effect of reaction temperature and the blend ratio of neem seed cake to plastic waste on the distribution of products and the chemical composition of the resultant pyrolysis oil. The co-pyrolysis performed at a 1:2 ratio of neem seed cake to plastic waste yielded an optimal oil production of 69.4 wt% with maximum positive synergy of 6.25% at 500°C. The physicochemical characteristics of the resulting co-pyrolysis oil demonstrated a striking resemblance to those of conventional fossil diesel. Further analysis through FT-IR revealed the presence of a different range of aromatic components. Quantitative analysis utilizing chromatographic peak area evaluations was undertaken to elucidate the compositional profile of the pyrolysis oils, thereby accentuating the presence of synergistic effects. Furthermore, GC-MS analysis provided empirical validation of the interaction between neem seed cake and waste plastics during co-pyrolysis, as indicated by discernible decrease in the concentration of oxygenated compounds.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 97 (2) , e20240988
Investigation of mechanical and thermal behaviors of dual fibre loaded reinforced vinylester composites
Due to ecological imbalances and global warming caused by synthetic fibres and petrochemical polymers, researchers are increasingly focusing on the study and fabrication of natural fibre-reinforced polymer composites. To date, no reports have been found on the synergistic effect of abaca and sisal fibre on vinylester (VE). In this research, a novel composite based on VE matrix containing sisal and abaca, ranging from 10 to 30 wt% loadings was developed. After fabrication of different composite samples, their physico-chemical properties were evaluated and examined. The results indicated that the dual fibre loaded vinyl ester composite with 30 wt% revealed maximum mechanical strength (29 MPa) compared to the pure VE (6 MPa). Similarly, the values of flexural (855 MPa), impact (10.77 kJ/mm2) and hardness strengths (86 HRB) of 30 wt% dual fibre loadings were increased compared to the neat VE (Flexural – 238 MPa, Impact – 6 kJ/mm2, Hardness - 9 HRB). The thermogravimetric analysis (TGA) depicted that the addition of sisal and abaca fibre decreases the initial onset degradation temperature of VE, respectively, but their weight residues were higher than those of pure VE indicating higher thermal stability. Further, the water absorption studies depicted decreased moisture absorption for the developed VE composites containing sisal and abaca fibre. Hence, the enhanced physico-chemical properties of newly developed composites were suitable for various applications ranging from aerospace to sports equipment.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 97 (2) , e20240988
Open AccessInvestigation of mechanical and thermal behaviors of dual fibre loaded reinforced vinylester composites
Due to ecological imbalances and global warming caused by synthetic fibres and petrochemical polymers, researchers are increasingly focusing on the study and fabrication of natural fibre-reinforced polymer composites. To date, no reports have been found on the synergistic effect of abaca and sisal fibre on vinylester (VE). In this research, a novel composite based on VE matrix containing sisal and abaca, ranging from 10 to 30 wt% loadings was developed. After fabrication of different composite samples, their physico-chemical properties were evaluated and examined. The results indicated that the dual fibre loaded vinyl ester composite with 30 wt% revealed maximum mechanical strength (29 MPa) compared to the pure VE (6 MPa). Similarly, the values of flexural (855 MPa), impact (10.77 kJ/mm2) and hardness strengths (86 HRB) of 30 wt% dual fibre loadings were increased compared to the neat VE (Flexural – 238 MPa, Impact – 6 kJ/mm2, Hardness - 9 HRB). The thermogravimetric analysis (TGA) depicted that the addition of sisal and abaca fibre decreases the initial onset degradation temperature of VE, respectively, but their weight residues were higher than those of pure VE indicating higher thermal stability. Further, the water absorption studies depicted decreased moisture absorption for the developed VE composites containing sisal and abaca fibre. Hence, the enhanced physico-chemical properties of newly developed composites were suitable for various applications ranging from aerospace to sports equipment.
- Open Access
- 1 February 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (2) , 026504
Investigation of machining rate and surface roughness in wire EDM of Al6063/WC/ZrO2 composite using response surface methodology
The aim of the current work is to explore the machinability behavior of Al6063/WC/ZrO2 metal matrix composites (MMC) produced through a stir casting process through wire electrical discharge machining (WEDM) process. In order to examine the effects of process parameters such as voltage (V), pulse on time (Ton) and pulse off time (Toff) on material removal rate (MRR) and surface roughness (SR), the experiments were conducted by adapting Response Surface Methodology (RSM) in conjunction with the central composite design (CCD). A second-order regression model has been developed to predict the response parameters and an analysis of variance (ANOVA) was performed to validate the significance of the models. Using the desirability function approach, the parameters were set for the highest MRR and the minimum SR value. The prediction was within a tolerable average error range. A total of 19 sets of tests were developed to obtain six possible solutions. The most suitable solution among these six has been found by a confirmatory experiment. The results indicate that voltage and its interactions have significantly affected both the responses than Ton and Toff. Overall, it can be said that the study of the Al6063/WC/ZrO2 MMCs using WEDM process parameters demonstrated improved casting and machining qualities.
- 1 February 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (2) , 026504
Open AccessInvestigation of machining rate and surface roughness in wire EDM of Al6063/WC/ZrO2 composite using response surface methodology
The aim of the current work is to explore the machinability behavior of Al6063/WC/ZrO2 metal matrix composites (MMC) produced through a stir casting process through wire electrical discharge machining (WEDM) process. In order to examine the effects of process parameters such as voltage (V), pulse on time (Ton) and pulse off time (Toff) on material removal rate (MRR) and surface roughness (SR), the experiments were conducted by adapting Response Surface Methodology (RSM) in conjunction with the central composite design (CCD). A second-order regression model has been developed to predict the response parameters and an analysis of variance (ANOVA) was performed to validate the significance of the models. Using the desirability function approach, the parameters were set for the highest MRR and the minimum SR value. The prediction was within a tolerable average error range. A total of 19 sets of tests were developed to obtain six possible solutions. The most suitable solution among these six has been found by a confirmatory experiment. The results indicate that voltage and its interactions have significantly affected both the responses than Ton and Toff. Overall, it can be said that the study of the Al6063/WC/ZrO2 MMCs using WEDM process parameters demonstrated improved casting and machining qualities.
- 13 July 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (58) , 88213-88223
Co-pyrolysis of neem wood bark and low-density polyethylene: influence of plastic on pyrolysis product distribution and bio-oil characterization
In this study, the investigation on the effect of plastic during co-pyrolysis with biomass was carried out in a fixed reactor. Pyrolysis of neem wood bark (NB), low density polyethylene (LDPE) and their blends at different ratios was performed in order to evaluate the product distribution. The effects of reaction temperature and NB-to-LDPE blend ratio on product distribution and the chemical compositions of pyrolysis oil were examined. The co-pyrolysis of NB and LDPE increased the yield and quality of the bio-oil. The experiments were conducted under different LDPE addition percentages such as 20%, 40%, 50%, 60% and 80%. Under the optimum experimental condition of 60% addition of LDPE and a temperature of 450 °C, the maximum yield of bio-oil (64.8 wt%) and hydrocarbon (75.2%) was achieved with the lowest yield of oxygenated compounds. The calorific value of the co-pyrolysis oil was found to be higher than that of the NB pyrolysis oil. The relationship between NB and LDPE during co-pyrolysis was validated with the help of gas chromatography-mass spectrometry (GC–MS) analysis, which showed decreased oxygenated compounds.
- 13 July 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (58) , 88213-88223
Co-pyrolysis of neem wood bark and low-density polyethylene: influence of plastic on pyrolysis product distribution and bio-oil characterization
In this study, the investigation on the effect of plastic during co-pyrolysis with biomass was carried out in a fixed reactor. Pyrolysis of neem wood bark (NB), low density polyethylene (LDPE) and their blends at different ratios was performed in order to evaluate the product distribution. The effects of reaction temperature and NB-to-LDPE blend ratio on product distribution and the chemical compositions of pyrolysis oil were examined. The co-pyrolysis of NB and LDPE increased the yield and quality of the bio-oil. The experiments were conducted under different LDPE addition percentages such as 20%, 40%, 50%, 60% and 80%. Under the optimum experimental condition of 60% addition of LDPE and a temperature of 450 °C, the maximum yield of bio-oil (64.8 wt%) and hydrocarbon (75.2%) was achieved with the lowest yield of oxygenated compounds. The calorific value of the co-pyrolysis oil was found to be higher than that of the NB pyrolysis oil. The relationship between NB and LDPE during co-pyrolysis was validated with the help of gas chromatography-mass spectrometry (GC–MS) analysis, which showed decreased oxygenated compounds.
- Open Access
- 9 July 2022
- Published by Wiley in Journal of Chemistry
- Vol. 2022, 1-9
Flash Pyrolysis Experiment on Albizia odoratissima Biomass under Different Operating Conditions: A Comparative Study on Bio-Oil, Biochar, and Noncondensable Gas Products
This study deals with the flash pyrolysis of Albizia odoratissima biomass wastes at different temperature, sweep gas flow rate, and heating rate in a fluidized bed reactor. In the first phase of the experimental work, the effect of temperature (350550°C) on product yield was analyzed, the second and third phases of the work were to analyze the effect of sweeping gas (N2), flow rate (1.252.25m3/hr), and heating rate (2040°C/min). The experimental works were carried out to get maximum bio-oil production. The experimental results demonstrated that the maximum yield of bio-oil was obtained at a temperature of 450°C, N2 flow rate of 1.75m3/hr, and heating rate of 30°C/min. Temperature was found to be the crucial factor rather than sweep gas flow rate in the product distribution. Fourier transform infrared spectroscopy (FT-IR), gas chromatography mass spectroscopy (GC-MS), and elemental analysis were done on the obtained bio-oil, biochar, and noncondensable gas products. The heating value of the bio-oil and biochar was identified as 18.15 and 23.47MJ/kg, respectively. The chemical analysis of the bio-oil showed that the oil is a mixture of phenol and oxygenated elements. The gas analyses showed that hydrogen and carbon dioxide were dominant, followed by carbon monoxide and methane.
- 9 July 2022
- Published by Wiley in Journal of Chemistry
- Vol. 2022, 1-9
Open AccessFlash Pyrolysis Experiment on Albizia odoratissima Biomass under Different Operating Conditions: A Comparative Study on Bio-Oil, Biochar, and Noncondensable Gas Products
This study deals with the flash pyrolysis of Albizia odoratissima biomass wastes at different temperature, sweep gas flow rate, and heating rate in a fluidized bed reactor. In the first phase of the experimental work, the effect of temperature (350550°C) on product yield was analyzed, the second and third phases of the work were to analyze the effect of sweeping gas (N2), flow rate (1.252.25m3/hr), and heating rate (2040°C/min). The experimental works were carried out to get maximum bio-oil production. The experimental results demonstrated that the maximum yield of bio-oil was obtained at a temperature of 450°C, N2 flow rate of 1.75m3/hr, and heating rate of 30°C/min. Temperature was found to be the crucial factor rather than sweep gas flow rate in the product distribution. Fourier transform infrared spectroscopy (FT-IR), gas chromatography mass spectroscopy (GC-MS), and elemental analysis were done on the obtained bio-oil, biochar, and noncondensable gas products. The heating value of the bio-oil and biochar was identified as 18.15 and 23.47MJ/kg, respectively. The chemical analysis of the bio-oil showed that the oil is a mixture of phenol and oxygenated elements. The gas analyses showed that hydrogen and carbon dioxide were dominant, followed by carbon monoxide and methane.
- Open Access
- 7 June 2022
- Published by Wiley in Scientific Programming
- Vol. 2022, 1-10
A Holistic Framework for Environment Conscious Based Material Selection and Experimental Assessment Using Digraph-Based Expert System
Finding a suitable biomass sample for the pyrolysis process with proper physicochemical properties is a challenging one as it has several criteria and attributes. Multicriteria decision-making (MCDM) represents a systematic approach for helping decision makers in diversified field. In this study, the application of the digraph and matrix approach is described for the selection of the most appropriate biomass material for yielding more liquid oil via thermochemical conversion. A biomass material selection index (BMSI) is proposed that evaluates and ranks the selected materials. The index is derived from a material selection attributes function and acquired from a material selection attributes digraph. The digraph is developed making an allowance for material selection attributes and its relative importance related to pyrolysis. A sequential procedure to assess the biomass material selection index is recommended in this study. Among the selected materials, this study demonstrated a sunflower shell with a higher index. At the end of the study, the prediction is also validated by conducting the experimental research.
- 7 June 2022
- Published by Wiley in Scientific Programming
- Vol. 2022, 1-10
Open AccessA Holistic Framework for Environment Conscious Based Material Selection and Experimental Assessment Using Digraph-Based Expert System
Finding a suitable biomass sample for the pyrolysis process with proper physicochemical properties is a challenging one as it has several criteria and attributes. Multicriteria decision-making (MCDM) represents a systematic approach for helping decision makers in diversified field. In this study, the application of the digraph and matrix approach is described for the selection of the most appropriate biomass material for yielding more liquid oil via thermochemical conversion. A biomass material selection index (BMSI) is proposed that evaluates and ranks the selected materials. The index is derived from a material selection attributes function and acquired from a material selection attributes digraph. The digraph is developed making an allowance for material selection attributes and its relative importance related to pyrolysis. A sequential procedure to assess the biomass material selection index is recommended in this study. Among the selected materials, this study demonstrated a sunflower shell with a higher index. At the end of the study, the prediction is also validated by conducting the experimental research.
- 20 April 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (40) , 61370-61382
An integrated CRITIC-TOPSIS- and Entropy-TOPSIS-based informative weighting and ranking approach for evaluating green energy sources and its experimental analysis on pyrolysis
Selection of the most suitable biomass material for bio-fuel generation is a complex and multi-criteria decision problem as it engages many conflicting criteria which have to be assessed simultaneously. In the past, researchers have used subjective weighing techniques, which question the reliability of the approach. In this study, two objective weighing methods such as Criteria Importance Through Intercriteria Correlation (CRITIC) and Entropy are used to calculate the weights of evaluating criteria and Technique for Order of Preference by Similarity to an Ideal Solution (TOPSIS) is applied to select the suitable biomass material. This study considered six biomass alternatives such as lemongrass (A1), hard wood (A2), rice husk (A3), wheat straw (A4), rice straw (A5), and switch grass (A6), and seven important criteria such as volatile matter, fixed carbon, moisture and ash content, lignin, cellulose, and hemicellulose have been evaluated. Both the approaches show that switch grass has been the best alternative for yielding more bio-oil while rice straw is seen as the worst preferred option among the selected biomass materials. These approaches are systematic having simple computational procedure for determination of complete ranking of biomass materials. At the end of the study, the prediction is also validated by conducting pyrolysis experiments and characterization study. The experimental findings are identical and indicating a strong correlation between MCDM approach and real-time study.
- 20 April 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (40) , 61370-61382
An integrated CRITIC-TOPSIS- and Entropy-TOPSIS-based informative weighting and ranking approach for evaluating green energy sources and its experimental analysis on pyrolysis
Selection of the most suitable biomass material for bio-fuel generation is a complex and multi-criteria decision problem as it engages many conflicting criteria which have to be assessed simultaneously. In the past, researchers have used subjective weighing techniques, which question the reliability of the approach. In this study, two objective weighing methods such as Criteria Importance Through Intercriteria Correlation (CRITIC) and Entropy are used to calculate the weights of evaluating criteria and Technique for Order of Preference by Similarity to an Ideal Solution (TOPSIS) is applied to select the suitable biomass material. This study considered six biomass alternatives such as lemongrass (A1), hard wood (A2), rice husk (A3), wheat straw (A4), rice straw (A5), and switch grass (A6), and seven important criteria such as volatile matter, fixed carbon, moisture and ash content, lignin, cellulose, and hemicellulose have been evaluated. Both the approaches show that switch grass has been the best alternative for yielding more bio-oil while rice straw is seen as the worst preferred option among the selected biomass materials. These approaches are systematic having simple computational procedure for determination of complete ranking of biomass materials. At the end of the study, the prediction is also validated by conducting pyrolysis experiments and characterization study. The experimental findings are identical and indicating a strong correlation between MCDM approach and real-time study.
- Open Access
- 14 April 2022
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2022, 1-9
Investigation on Forestry Wood Wastes: Pyrolysis and Thermal Characteristics of Ficus religiosa for Energy Recovery System
Pyrolysis is the most important thermochemical process that can be used for the production of biofuel, from wood and wood-based lignocellulosic materials. In this study, bio-oil is produced from the bio-weed named Ficus religiosa by the thermal pyrolysis process by utilizing laboratory-scale fluidized bed reactor. This study deals with the production of maximum bio-oil by optimizing process parameters such as process temperature, particle size, and sweep gas flow rate. Further different analytical techniques were used to describe the properties of bio-oil for different applications. Wood and wood barks of Ficus religiosa were chosen as the raw material due to their higher volatile content (72.4). The maximum yield of 47.5 wt bio-oil was collected at the optimized operating conditions of 450°C temperature, 1.0mm particle size, and 2.0m3/h sweep gas flow rate. Compared with other operating parameters, temperature is observed as the most significant one to determine the product yield. Through chromatographic analysis, it was identified that the bio-oil is found with the variety of chemical compounds including alcohols, alkenes, phenols, saturated fatty acids, and esters.
- 14 April 2022
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2022, 1-9
Open AccessInvestigation on Forestry Wood Wastes: Pyrolysis and Thermal Characteristics of Ficus religiosa for Energy Recovery System
Pyrolysis is the most important thermochemical process that can be used for the production of biofuel, from wood and wood-based lignocellulosic materials. In this study, bio-oil is produced from the bio-weed named Ficus religiosa by the thermal pyrolysis process by utilizing laboratory-scale fluidized bed reactor. This study deals with the production of maximum bio-oil by optimizing process parameters such as process temperature, particle size, and sweep gas flow rate. Further different analytical techniques were used to describe the properties of bio-oil for different applications. Wood and wood barks of Ficus religiosa were chosen as the raw material due to their higher volatile content (72.4). The maximum yield of 47.5 wt bio-oil was collected at the optimized operating conditions of 450°C temperature, 1.0mm particle size, and 2.0m3/h sweep gas flow rate. Compared with other operating parameters, temperature is observed as the most significant one to determine the product yield. Through chromatographic analysis, it was identified that the bio-oil is found with the variety of chemical compounds including alcohols, alkenes, phenols, saturated fatty acids, and esters.