Oxidation Resistance Coating of LSM and LSCF on SOFC Metallic Interconnects by the Aerosol Deposition Process
Authors:
- 2 June 2007
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 90 (6) , 1926-1929
Abstract
Conductive La 0.8 Sr 0.2 MnO 3 (LSM) and La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) layers with a thickness of ∼10 μm were deposited on ferritic stainless steel (SS) by the aerosol deposition method, for use as an oxidation resistance‐coating layer in the metallic interconnector of a solid oxide fuel cell. The coated layers were fairly dense without pores or cracks, and maintained good adhesion even after oxidation at 800°C for 100 h. The surface of the bare SS after annealing at 800°C for 100 h was covered with Cr 2 O 3 and Fe 3 O 4 oxide scales, and the electrical conductivity was sharply decreased. However, the LSM‐ and LSCF‐coated SSs showed a surface microstructure with almost no oxidation and maintained good electrical conductivity after annealing at 800°C for 100 h. The area‐specific resistance (ASR) of LSM‐ and LSCF‐coated alloys after 100 h of oxidation at 800°C was 20.6 and 11.7 mΩ·cm 2 , respectively.Keywords
This publication has 9 references indexed in Scilit:
- Electrical Properties of Lead Zinc Niobate - Lead Zirconate Titanate Thick Films Formed by Aerosol Deposition ProcessSolid State Phenomena, 2007
- Effects of La0.8Sr0.2Mn(Fe)O3-δ Protective Coatings on SOFC Metallic InterconnectsJournal of Rare Earths, 2006
- Aerosol Deposition of Ceramic Thick Films at Room Temperature: Densification Mechanism of Ceramic LayersJournal of the American Ceramic Society, 2006
- Influence of post-treatments on the contact resistance of plasma-sprayed La0.8Sr0.2MnO3 coating on SOFC metallic interconnectorSurface and Coatings Technology, 2005
- Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical propertiesSolid State Ionics, 2005
- Effect of slurry-coated LaSrMnO on the electrical property of Fe?Cr alloy for metallic interconnect of SOFCSolid State Ionics, 2004
- Opportunity of metallic interconnects for solid oxide fuel cells: a status on contact resistanceMaterials Research Bulletin, 2003
- Development of interconnect materials for solid oxide fuel cellsMaterials Science and Engineering: A, 2003
- Fabrication of thin electrolytes for second-generation solid oxide fuel cellsSolid State Ionics, 2000