A Study of the Effects of Moisture on Composite−to−Metal Double−Lap Shear Joints
Open Access
Abstract
This work investigated the effects of moisture absorption treatment on composite−to−metal double−lap shear joints (DLSJs) bonded with epoxy adhesive film through experiments and simulations. The composite−to−metal DLSJ can be divided into five parts (the interface between the composite and adhesive, the interface between the adhesive and metal, the composite adherend, the metal adherend, and the adhesive layer). First, the wet−dependent properties of the adhesive and interfaces were obtained through adhesive tensile tests and GC tests, which showed that the properties of the adhesive and interfaces were significantly affected by the moist environment. Then, tensile tests of the composite−to−metal double−lap shear joints were carried out in dry and wet environments. Finally, based on the experimental investigations, a finite element (FE) model that considered cohesive damage was established for simulating damage evolution and predicting the failure loads and failure modes of the DLSJs. The results of both the experimental and numerical tests show that the DLSJ failure load decreases significantly after immersion in 95 °C water, and the major failure mode transfers from adhesive failure to interface failure. The research results provide a theoretical basis or basic data for the structural design of adhesively bonded composite−to−metal.Keywords
Funding Information
- National Natural Science Foundation of China (12102115)
This publication has 34 references indexed in Scilit:
- A novel profiling concept leading to a significant increase in the mechanical performance of metal to composite adhesive jointsComposites Part B: Engineering, 2023
- Composite-to-metal joining using interference fit micropinsComposites Part A: Applied Science and Manufacturing, 2022
- Delamination propagation criterion including the effect of fiber bridging for mixed-mode I/II delamination in CFRP multidirectional laminatesComposites Science and Technology, 2017
- Experiment and design methods of composite scarf repair for primary-load bearing structuresComposites Part A: Applied Science and Manufacturing, 2016
- An investigation of hygrothermal effects on adhesive materials and double lap shear joints of CFRP composite laminatesComposites Part B: Engineering, 2016
- Mechanical behaviour and failure modes of metal to composite adhesive joints for nautical applicationsThe International Journal of Advanced Manufacturing Technology, 2010
- An Investigation of the Tensile Strength of a Composite-To-Metal Adhesive JointApplied Composite Materials, 2010
- Nonlinear buckling analysis of hygrothermoelastic composite shell panels using finite element methodComposites Part B: Engineering, 2009
- Effect of temperature and humidity on transient hygrothermal stresses during moisture desorption in laminated composite platesComposite Structures, 2008
- Optimum design of the co-cured double lap joint composed of aluminum and carbon epoxy compositeComposite Structures, 2006