Abstract
Tire pressure monitoring system (TPMS) has been brought into the stringent regulatory frameworks of many countries in the automotive market. However, common commercial TPMSs must rely on a life-limited battery, which brings about some safety risks and environmental problems. It is worthy to note that energy harvesting approaches are promising to realize a batteryless TPMS. Here, a rotation-driven piezoelectric energy harvester with eight typical nonlinear buckled-bridges is proposed to effectively scavenge ultralow-frequency kinetic energy. Thinned bulk PZT film is employed as the piezoelectric functional layer based on its excellent electromechanical factor. Gear induced inter-well oscillation mechanism ensures the effective deformation of the piezoelectric buckled-bridges. The developed harvester can generate the effective output power of 8.9 mW under the optimal resistance of 3 kΩ at 8.3 Hz rotational frequency. The 47, 100 and 330 μF capacitors can be saturated at 14.5, 15.1 and 14.5 V during 10 s, 19 s and 51 s, respectively. Additionally, a commercial TPMS can be effectively powered by this harvester when it works at more than a critical frequency locating at 3.0 to 3.7 Hz. The commercial TPMS can be operated in real time when the applied rotational frequency is more than 8.3 Hz.
Funding Information
  • Joint Foundation of Pre-Research of Equipment and Ministry of Education (6141A02022637)
  • Pre-Research Foundation of Equipment (6142601180202)

This publication has 43 references indexed in Scilit: