Modeling and Analysis of a Novel Priority Valve Controlled Cable Reeling Drum Drive of Load Haul Dump Vehicle
- 8 June 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 70 (7) , 6636-6646
Abstract
This paper presents the modeling and analysis of a novel priority valve controlled open-loop Cable Reeling Drum (CRD) drive of Load Haul Dump (LHD) vehicle. The LHD vehicle is basically a trackless loading machine having wide applications in underground mining operations. The CRD incorporated in the said machine performs the reeling/unreeling operation of the flexible trailing cables that supply electric power to the machine. In this respect, a novel hydraulic circuit is proposed that incorporates a priority valve for the operation of the hydro motor driving the CRD, unlike the existing LHD machines having a separate hydraulic arrangement for the CRD operation. In the present study, the flow through the bypass port of the priority flow divider (PFD) valve is utilized for driving the CRD. In analyzing the proposed hydraulic system, the detailed model is analytically solved in MATLAB/Simulink software, and the simulation results are validated experimentally. The effects of change of the critical parameters on the system's dynamic responses are analyzed using the validated simulation model. The investigations show that till the fluid flow metered to the PFD valve is higher than the priority flow demand, the machine's priority function is not affected by the operation of the CRD. However, with the actuation of the priority operation, the hydro-motor drive speed of the CRD decreases. The model proposed in this study may be considered as a basis for the re-design of the hydraulic arrangement of CRD drive incorporated in an LHD machine for its improved performance.Keywords
Funding Information
- Department of Science and Technology (SR/FST/ET-I/2018/180)
This publication has 12 references indexed in Scilit:
- Dynamic analysis of a hydro-motor drive system using priority valveProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2018
- Analysis of decay characteristics of an accumulator in an open-circuit hydrostatic system with pump loadingProceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2017
- Comparison of the efficiency of the high speed low torque hydrostatic drives using bent axis motor: An experimental studyProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2015
- Modeling and analysis of the electro-hydraulic proportional valve controlled motor system supplied by variable pressure accumulator2015
- Dynamic Simulation of Variable-Speed Valve-Controlled-Motor Drive System with a Power-Assisted DeviceStrojniški vestnik - Journal of Mechanical Engineering, 2014
- Analysis of Electro-hydraulic Proportional Speed Control System on ConveyerProcedia Engineering, 2012
- Static flow stability analysis of priority valve2011
- Fundamentals of Fluid Power Control2009
- Modeling and Analysis of a Flow Divider Valve2009
- Optimization and Experimental Verification of a Variable Ratio Flow Divider ValveInternational Journal of Fluid Power, 2005