Laser-Deposited Multilayer Coatings for Brake Discs: Corrosion Performance of 316L/430L Systems Reinforced with WC and TiC Particles
Open Access
Abstract
Grey cast iron brake discs are widely used in automotive applications due to their excellent thermal and mechanical properties. However, stricter environmental regulations such as Euro 7 demand improved surface durability to reduce particulate emissions and corrosion-related failures. This study evaluates multilayer coatings fabricated by Laser Metal Deposition (LMD) as a potential solution. Two multi-layer systems were investigated: 316L + (316L + WC) and 316L + (430L + TiC), which were primarily reinforced with ceramic additives to increase wear resistance, with their influence on corrosion being critically evaluated. Electrochemical tests in 5 wt.% NaCl solution (DIN 17475) revealed that the 316L + (316L + WC) coating exhibited the lowest corrosion current density and most stable passive behavior, consistent with the inherent passivation of the austenitic 316L matrix. In contrast, the 316L + (430L + TiC) system showed localized corrosion associated with micro-galvanic interactions, despite the chemical stability of TiC particles. Post-corrosion SEM and EDS confirmed chromium depletion and chloride accumulation at corroded sites, while WC particles exhibited partial dissolution. These findings highlight that ceramic reinforcements do not inherently improve corrosion resistance and may introduce localized degradation mechanisms. Nevertheless, LMD-fabricated multilayer coatings demonstrate potential for extending brake disc service life, provided that matrix–reinforcement interactions are carefully optimized.Keywords
All Related Versions
This publication has 58 references indexed in Scilit:
- Effect of Scanning Speed on Microstructure, Hardness, and Corrosion Behavior of Additively Manufactured 316L SS in a Chloride-Rich EnvironmentJournal of Materials Engineering and Performance, 2025
- TiC-Reinforced Austenitic Stainless Steel Laser Cladding Layer on 27SiMn Steel Surface: A Comparative Study of Microstructure, Corrosion, Hardness, and Wear PerformanceJournal of Materials Engineering and Performance, 2024
- Fracture and Wear Behavior of Functionally Graded 316L–TiC Composite Fabricated by Selective Laser Melting Additive ManufacturingSteel Research International, 2024
- Microstructure, Corrosive-Wear and Electrochemical Properties of TiC Reinforced Fe30 Coatings by Laser CladdingJournal of Materials Engineering and Performance, 2024
- Laboratory and on-road testing for brake wear particle emissions: a reviewEnvironmental Science and Pollution Research, 2023
- Microstructure, Hardness, and Corrosion Behavior of TiC-Duplex Stainless Steel Composites Fabricated by Spark Plasma SinteringJournal of Materials Engineering and Performance, 2017
- Brake wear particle emissions: a reviewEnvironmental Science and Pollution Research, 2014
- The Effect of Surface Roughness on the Corrosion Properties of Type AISI 304 Stainless Steel in Diluted NaCl and Urban Rain SolutionJournal of Materials Engineering and Performance, 2014
- Grain boundary chromium depletion in austenitic alloysJournal of Materials Science, 2010
- The eta carbides in the Fe−W−C and Co−W−C systemsMetallurgical Transactions, 1970