Study of the dependence of relative elongation on mechanical stress of polyvinyl chloride films
Open Access
- 1 January 2024
- journal article
- research article
- Published by al-Farabi Kazakh National University in Recent Contributions to Physics
- Vol. 90 (3) , 64-69
Abstract
The dependence of relative elongation on mechanical stress in polyvinyl chloride samples of various widths and working lengths was experimentally studied. The purpose of the study was to study the dependence of deformation on mechanical stress of polyvinyl chloride films of various sizes (width and length). The scientific and practical significance of the work lies in the fact that the data can serve as the basis for future research. Polyvinyl chloride film with a thickness of 100 microns was chosen as the material under study. The film sheets were cut into strips 3, 5, 7, 10 mm wide using a special cutting device with adjustable sample cutting width and length. The working length of the samples was: 4, 5, 6, 7, 8 cm. The tests were carried out on a special tensile testing machine RU-50. This setup is designed to study the dependence of strain (relative elongation) ε on stress σ. Significant changes in the mechanical properties of the material were discovered depending on various geometric parameters. The data obtained are satisfactorily described by the authors' models. The value of this study lies in the fact that the results of the work, according to the authors, will serve as an incentive to improve the mechanical properties of the research object.Keywords
This publication has 9 references indexed in Scilit:
- STUDY OF THE MECHANICAL PROPERTIES OF INDUSTRIAL PLEXIGLAS TESTING FOR FLAT STRAIGHT BENDINGInternational Journal of Mathematics and Physics, 2021
- Effect of physical and environmental factors on the performance of a photovoltaic panelSolar Energy Materials and Solar Cells, 2019
- Blended PVC/PVC-g-PEGMA ultrafiltration membranes with enhanced performance and antifouling propertiesApplied Surface Science, 2018
- Catastrophic models of materials destructionIOP Conference Series: Materials Science and Engineering, 2016
- Calendering of metal/polymer composites: An analytical formulationMechanics of Materials, 2016
- Hydrogen Environment Embrittlement on Austenitic Stainless Steels from Room Temperature to Low TemperaturesIOP Conference Series: Materials Science and Engineering, 2015
- Peeling behavior of a viscoelastic thin-film on a rigid substrateInternational Journal of Solids and Structures, 2014
- Influence of Plasticizer Content on the Transition of Electromechanical Behavior of PVC Gel ActuatorLangmuir, 2011
- Degradation mechanisms of cable insulation materials during radiation–thermal ageing in radiation environmentRadiation Physics and Chemistry, 2011