Absorptive Coding Metasurface With Ultrawideband Backscattering Reduction
- 18 May 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 19 (7) , 1201-1205
Abstract
In this letter, a new absorptive coding metasurface with a triple-layer topology is proposed to reduce the backscattering in an ultra-wide band by combining absorption and diffusion simultaneously. Two separate layers for the coding metasurface and absorber are designed to primarily reduce the high- and low-frequency backscattering. A high-frequency reflective frequency selective surface is added between the coding metasurface and the absorber, serving as an equivalent ground plane for the coding metasurface and eliminating the adverse influence of the harmonic resonances of the absorber at high frequencies. The proposed absorptive coding metasurface is very robust for absorption and diffusion resulting in a backscattering reduction over an ultra-wide band. To validate the concept, an absorptive coding metasurface with a size of 288 mm × 288 mm is designed. Its unit cell exhibits a co-polarized reflection magnitude smaller than -10 dB from 1.55 GHz to 19.2 GHz (corresponding bandwidth ratio of 1:12.4) with a thickness of 17.73 mm (about 0.092λL at the lowest operating frequency). Simulated and measured results of the absorptive coding metasurface are in good agreement, and they demonstrate a significant backscattering reduction from 1.85 GHz to 19.2 GHz in comparison with a metallic plane of the same size.Keywords
This publication has 17 references indexed in Scilit:
- Double-Layer Circuit Analog Absorbers Based on Resistor-Loaded Square-Loop ArraysIEEE Antennas and Wireless Propagation Letters, 2018
- Absorptive coding metasurface for further radar cross section reductionJournal of Physics D: Applied Physics, 2018
- Ultrathin Broadband Absorber Using Frequency-Selective Surface and Frequency-Dispersive Magnetic MaterialsIEEE Transactions on Antennas and Propagation, 2017
- Dual-Band Low-Scattering Metasurface Based on Combination of Diffusion and AbsorptionIEEE Antennas and Wireless Propagation Letters, 2017
- Double-Sided Parallel-Strip Line Resonator for Dual-Polarized 3-D Frequency-Selective Structure and AbsorberIEEE Transactions on Microwave Theory and Techniques, 2017
- Broadband and Broad-angle Polarization-independent Metasurface for Radar Cross Section ReductionScientific Reports, 2017
- A Coding Diffuse Metasurface for RCS ReductionIEEE Antennas and Wireless Propagation Letters, 2016
- Thin AMC Structure for Radar Cross-Section ReductionIEEE Transactions on Antennas and Propagation, 2007
- Ultimate thickness to bandwidth ratio of radar absorbersIEEE Transactions on Antennas and Propagation, 2000
- The design of Jauman absorbersIEEE Antennas and Propagation Magazine, 1994