Abstract
The bandwidth of frequency-selective surface (FSS)-based absorber decreases when high permittivity material is used to reduce the thickness of the absorber. A solution of this thickness-bandwidth dilemma was presented by using resistive FSS layer and frequency-dispersive magnetic material (FDMM) in substrate. The FDMM was designed for certain profile of complex permeability, and the FDMM substrate has both high permeability and permittivity for thickness reduction and near frequency-non-dispersive input susceptance for bandwidth expanding at low frequencies. A 2.3mm-thick FSS-based FDMM absorber was designed and fabricated, which achieved a broad absorption band of 4~15 GHz (3.75:1) with -10dB reflectivity. In terms of the same bandwidth ratio, the thickness of FSS-based FDMM absorber is only 0.031 λL against the thickness of 0.114 λL of conventional FSS-based absorber.

This publication has 26 references indexed in Scilit: