Influence of Component Ratio, Mechanical Activation, and Preclamping of Samples on Combustion in the (5Ti + 3Si) + (Ti + 2B) System
- 1 June 2026
- journal article
- research article
- Published by Pleiades Publishing Ltd in Combustion, Explosion, and Shock Waves
- Vol. 62 (3) , 463-473
Abstract
This paper examines the influence of component ratio, mechanical activation, and preclamping of samples on the combustion speed and elongation of unclamped samples during synthesis and the phase composition and morphology of combustion products in the (5Ti + 3Si) + (Ti + 2B) system. The combustion front did not reach the lower end face of the sample prepared from a 5Ti + 3Si starting mixture. Preclamping, mechanical activation of the 5Ti + 3Si mixture, or the addition of a Ti + 2B mixture enabled complete combustion of the sample. Mechanical activation of (100 – x)(5Ti + 3Si) + x(Ti + 2B) mixtures increased the elongation and combustion speed of the samples. The combustion speed was shown to have a tendency to decrease with increasing 5Ti + 3Si content. Preclamping increased the combustion speed of the samples prepared from the mechanically activated mixtures and had little or no effect on the combustion speed of the samples prepared from the starting mixtures (except for the Ti + 2B mixture). For some starting mixtures, preclamping led to shrinkage of the samples. The samples containing 20% 5Ti + 3Si mixture had the highest combustion speed. The elongation of the samples prepared from the (100 – x)(5Ti + 3Si) + x(Ti + 2B) starting mixtures was a nonmonotonic function of their composition, with extrema. Neither preclamping of the samples nor mechanical activation of the starting mixtures caused changes in the phase composition of the combustion products.Keywords
This publication has 35 references indexed in Scilit:
- Mechanical properties and microstructure of Ti5Si3 based composites prepared by combination of MASHS and SPS in Ti-Si-Ni and Ti-Si-Ni-C systemsMaterials Chemistry and Physics, 2019
- The Solid Flame Phenomenon: A Novel PerspectiveAdvanced Engineering Materials, 2018
- Thermal explosion of a mechanically activated 3Ni-Al mixtureCombustion, Explosion, and Shock Waves, 2010
- TiC–TiB2 composites: A review of phase relationships, processing and propertiesJournal of the European Ceramic Society, 2008
- Gasless Combustion of a Model Multilayer System (Combustion of Disks without Gaps(Combustion, Explosion, and Shock Waves, 2002
- Mechanical activation effect on the self-sustaining combustion reaction in the Mo–Si systemJournal of Alloys and Compounds, 2001
- Unique features of combustion of the system Ti-C-BCombustion, Explosion, and Shock Waves, 1983
- Interaction of titanium, boron, and carbon in the combustion regimeCombustion, Explosion, and Shock Waves, 1978
- Propagation of gasless reactions in solids—II. Experimental study of exothermic intermetallic reaction ratesCombustion and Flame, 1973
- Propagation of gasless reactions in solids—I. Analytical study of exothermic intermetallic reaction ratesCombustion and Flame, 1973