Predicting Residual Tensile Strength of Seven-Wire Strands Using That of Single Wires Exposed to Chloride Environments
- 1 August 2014
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 26 (8)
Abstract
The steel strands in posttensioned (PT) concrete systems are typically embedded inside cementitious grout for protection from the environment. However, strands not embedded in grout have been observed in PT systems. The exposed strand is susceptible to corrosion, and particularly the location where the strand protrudes from the grout (i.e., grout-air-steel interface) is more vulnerable to corrosion. Prediction of the tension capacity (CT) of strands with such interfaces under various exposure conditions is necessary for structural assessment. This prediction could be accomplished by using the data from an experimental program that includes the exposure of strands to various corrosive environments and testing to determine the time-variant residual CT of these strands. However, these tests are cumbersome and expensive, especially when it is necessary to maintain very high tensile stress conditions during the exposure period to simulate the in-service stress conditions on the strands in PT systems. S...Keywords
This publication has 7 references indexed in Scilit:
- Probabilistic Models for the Tensile Strength of Corroding Strands in Posttensioned Segmental Concrete BridgesJournal of Materials in Civil Engineering, 2010
- Probabilistic Capacity Models for Corroding Posttensioning Strands Calibrated Using Laboratory ResultsJournal of Engineering Mechanics, 2009
- The effect of temperature on the corrosion of steel in concrete. Part 1: Simulated polarization resistance tests and model developmentCorrosion Science, 2009
- Stress corrosion cracking mechanism of prestressing steels in bicarbonate solutionsCorrosion Science, 2007
- Detection of SCC on prestressing steel wire by the simultaneous use of electrochemical noise and acoustic emission measurementsElectrochimica Acta, 2007
- Failure mechanisms of high strength steels in bicarbonate solutions under anodic polarizationCorrosion Science, 2003
- Probabilistic Capacity Models and Fragility Estimates for Reinforced Concrete Columns based on Experimental ObservationsJournal of Engineering Mechanics, 2002