Structural Factors of Platinum-Supported Carbon Influencing Ionomer Adsorption in Fuel Cell Catalyst Inks
Open Access
- 28 January 2026
- journal article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (5) , 8005-8014
Abstract
In catalyst inks for polymer electrolyte fuel cells, the adsorption of ionomers onto platinum-supported carbon (Pt/C) critically influences the formation of Pt/C agglomerate structures, which, in turn, affect both the processability and performance of the catalyst layer. However, the Pt/C properties that determine ionomer adsorption are still not well understood. Here, we investigate the ionomer adsorption ratio (Γ), defined as the ratio of the adsorbed ionomer to the total ionomer in the catalyst ink, using various carbon materials with different key Pt/C properties. These properties include the accessible specific surface area (Aacc, defined as the BET specific surface area excluding micro- and mesopores and Pt-covered regions), the radius (Ragg) of carbon aggregates composed of primary particles, the surface density of acid functional groups (ρacid) and platinum weight ratio. By analyzing the correlation between these properties and Γ, we derived a universal equation that describes the relationship between the adsorption ratio and these properties. The ionomer adsorption ratio Γ increases proportionally with the accessible specific surface area (Aacc) of the support carbon. In contrast, Γ decreases inversely with an increasing radius Ragg of the carbon aggregates. Additionally, Γ depends on ρacid and the platinum weight ratio. When ρacid is below a certain threshold (ρacidmax), Γ remains nearly constant regardless of ρacid. However, when ρacid exceeds ρacidmax, Γ sharply decreases with increasing ρacid. The threshold ρacidmax decreases exponentially with an increasing platinum weight ratio. The overall relationship can be expressed as Γ = c1Aacc/[Ragg(1 + c2 exp{-c3[1 - (ρacid/ρacidmax)]})], where c1, c2, and c3 are universal constants. This equation offers a valuable guideline for designing the Pt/C agglomerate structure in catalyst inks and the resulting catalyst layers after drying.Keywords
Funding Information
- Toyota Central R&D Labs., Inc
This publication has 57 references indexed in Scilit:
- A Rheo-Impedance investigation on the interparticle interactions in the catalyst ink and its impact on electrode network formation in a proton exchange membrane fuel cellApplied Energy, 2024
- Measurement of Ionomer Coverage on Carbon and Pt in Catalyst Layer of Polymer Electrolyte Fuel Cells by Electrochemical Impedance SpectroscopyElectrocatalysis, 2023
- The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A ReviewElectrochemical Energy Reviews, 2020
- Influence of ionomer adsorption on agglomerate structures in high-solid catalyst inksCarbon, 2020
- Nano carbon supported platinum catalyst interaction behavior with perfluorosulfonic acid ionomer and their interface structuresApplied Catalysis B: Environment and Energy, 2016
- Analysis of the Microstructure Formation Process and Its Influence on the Performance of Polymer Electrolyte Fuel‐Cell Catalyst LayersChemElectroChem, 2015
- Interaction of multi-walled carbon nanotubes with perfluorinated sulfonic acid ionomers and surface treatment studiesCarbon, 2014
- SANS studies on catalyst ink of fuel cellJournal of Applied Polymer Science, 2013
- Low platinum loading electrodes for polymer electrolyte fuel cells fabricated using thermoplastic ionomersElectrochimica Acta, 1995
- Thin-film catalyst layers for polymer electrolyte fuel cell electrodesJournal of Applied Electrochemistry, 1992