SYShuhei Yoshino

Shuhei Yoshino

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shuhei Yoshino has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Structural Factors of Platinum-Supported Carbon Influencing Ionomer Adsorption in Fuel Cell Catalyst Inks

    by Shuhei Yoshino, Masashi Harada, Naoki Hasegawa, Shuji Yomo, Akihiko Koiwai, Saori Minami, Shunsuke Yamakawa, Ryosuke Jinnouchi

    In catalyst inks for polymer electrolyte fuel cells, the adsorption of ionomers onto platinum-supported carbon (Pt/C) critically influences the formation of Pt/C agglomerate structures, which, in turn, affect both the processability and performance of the catalyst layer. However, the Pt/C properties that determine ionomer adsorption are still not well understood. Here, we investigate the ionomer adsorption ratio (Γ), defined as the ratio of the adsorbed ionomer to the total ionomer in the catalyst ink, using various carbon materials with different key Pt/C properties. These properties include the accessible specific surface area (Aacc, defined as the BET specific surface area excluding micro- and mesopores and Pt-covered regions), the radius (Ragg) of carbon aggregates composed of primary particles, the surface density of acid functional groups (ρacid) and platinum weight ratio. By analyzing the correlation between these properties and Γ, we derived a universal equation that describes the relationship between the adsorption ratio and these properties. The ionomer adsorption ratio Γ increases proportionally with the accessible specific surface area (Aacc) of the support carbon. In contrast, Γ decreases inversely with an increasing radius Ragg of the carbon aggregates. Additionally, Γ depends on ρacid and the platinum weight ratio. When ρacid is below a certain threshold (ρacidmax), Γ remains nearly constant regardless of ρacid. However, when ρacid exceeds ρacidmax, Γ sharply decreases with increasing ρacid. The threshold ρacidmax decreases exponentially with an increasing platinum weight ratio. The overall relationship can be expressed as Γ = c1Aacc/[Ragg(1 + c2 exp{-c3[1 - (ρacid/ρacidmax)]})], where c1, c2, and c3 are universal constants. This equation offers a valuable guideline for designing the Pt/C agglomerate structure in catalyst inks and the resulting catalyst layers after drying.


  • Impact of Platinum/Carbon Aggregate Size on Agglomerate Structure and Performance of Polymer Electrolyte Fuel Cells

    by Shuji Yomo, Shuhei Yoshino, Naoki Hasegawa, Masashi Harada, Shunsuke Yamakawa

    The aggregate size of Pt/C plays a crucial role in determining the agglomerate structure formed in catalyst inks and the porous structure of catalyst layers (CLs); consequently, it strongly influences the performance of polymer electrolyte fuel cells (PEFCs). To elucidate the underlying mechanism, we controlled the Pt/C aggregate size by varying the number of ball-milling cycles and evaluated the resulting agglomerate structures and CL properties. Large aggregates, with limited outer surface area for ionomer adsorption that allows hydrophobic interactions among Pt/C aggregates to dominate, promoted flocculation and the formation of coarse agglomerates, leading to non-uniform CLs and poor proton-conduction pathways within the agglomerates. As a result, platinum utilization decreased, and cell performance deteriorated. In contrast, smaller aggregates provided sufficient ionomer adsorption, balancing electrostatic repulsion and hydrophobic attraction. This facilitated colloidal gel formation and yielded uniform CLs. Improved ionomer coverage increased platinum utilization and mitigated oxygen transport resistance, leading to enhanced performance. Overall, these findings highlight that precise control of aggregate size is essential not only for stabilizing catalyst inks but also for designing CL microstructures that enable high-performance PEFC electrodes.


  • Effect of Aggregate Size of Platinum-Supported Carbon on Colloidal Gel Formation in Catalyst Inks and Cell Performance in Polymer Electrolyte Fuel Cells

    by Shuji Yomo, Shuhei Yoshino, Naoki Hasegawa, Masashi Harada, Akihiko Koiwai, Shunsuke Yamakawa

    The dispersion stability of catalyst inks and the cell performance of the resulting catalyst layer in polymer electrolyte fuel cells are influenced by the type of platinum-supported carbon (Pt/C) used. However, the specific effects of Pt/C properties remain unclear. In this study, we focus on the effect of Pt/C aggregate size and investigate its impact on the formation of colloidal gel in catalyst inks—a stable agglomerate structure that contributes to dispersion stability—as well as on the resulting cell performance. To achieve this, the aggregate size was controlled by varying the number of ball milling (BM) cycles: 1, 5, and 10. When the aggregate size is large (1 and 5 BM cycles), colloidal gel formation is hindered because the limited outer surface area of larger aggregates reduces ionomer adsorption, weakening electrostatic repulsion (Fig. 1, top). As a result, sedimentation of Pt/C dominates over Brownian motion. Additionally, restricted ionomer penetration into larger aggregates limits ion conduction pathways, leading to low platinum utilization and suboptimal cell performance (Fig. 2). In contrast, when the Pt/C aggregate size is small (10 BM cycles), colloidal gel formation is promoted because the increased outer surface area enhances ionomer adsorption and strengthens electrostatic repulsion (Fig. 1, bottom). As a result, Brownian motion dominates over sedimentation. Moreover, the smaller aggregates allow more platinum sites to become accessible to the ionomer, enhancing catalyst utilization and improving cell performance (Fig. 2). Figure 1

  • ( Invited ) Impact of Catalyst Ink Properties on Performance and Processability in Polymer Electrolyte Fuel Cells

    by Shuhei Yoshino, Masashi Harada, Naoki Hasegawa, Shuji Yomo, Akihiko Koiwai, Tomoyuki Kinjo, Saori Minami, Shunsuke Yamakawa, Ryosuke Jinnouchi

    Improving the processability of the catalyst layers (CL) in polymer electrolyte fuel cells (PEFCs), without compromising the CL performance, is essential for achieving affordable PEFCs and their widespread adoption. As the CL is formed from the catalyst ink, controlling the agglomerate structure (i.e., flocculation of Pt/C aggregates) and ionomer distribution in the ink is a key factor to achieve high processability and performance [1]. The agglomerate structure determines ink viscosity and the resulting porous structure of the CL, while adsorbed ionomers regulate this structure via electrostatic repulsion [2,3], and free ionomers, upon drying, adsorb onto the Pt surface, increasing oxygen transport resistance and suppressing catalytic activity through ionomer coverage [3-5]. Previous studies have reported the effects of ink’s processing properties (e.g., solvent compositions, dispersion methods) or material properties (e.g., type of support carbons or ionomers) on the processability, CL structure, and performance [4,7-9]. However, the detailed and systematic interpretation of the mechanism linking material and process factors to ink agglomerates and ionomer distribution, and ultimately to CL structures and their performance, has not yet been fully established. Here, we investigate the formation mechanisms of agglomerates and ionomer distribution in catalyst inks based on various process and material properties, and their impact on CL structure and performance. In this presentation, we focus on the effect of process variables including solvent composition and dispersion methods, and material properties such as the type of Pt/C and ionomer concentration in its stock solution, on agglomerate formation and ionomer distribution within catalyst inks [2,10]. Structural features of agglomerates and ionomer distributions in inks and CLs were analyzed using a concentrated laser particle size analyzer, ultra-small-angle X-ray scattering (USAXS), ultra-small-angle neutron scattering (USANS) [10], while finer structures were investigated by transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS). We place particular emphasis on quantitatively understanding the ionomer adsorption ratio (Γ), defined as the weight fraction of ionomers adsorbed onto Pt/C relative to the total ionomer content in the ink, as it plays a key role in determining the agglomerate structure [2]. Our approach demonstrated that adjusting the solvent composition and dispersion methods according to Pt/C properties—including aggregate size and fractal dimension, surface functional group density, and Pt weight percent—enabled the optimization of Г. This led to smaller and more uniform agglomerates that were less sensitive to solid concentration during drying, thereby improving sedimentation stability. As a consequence, the resulting uniform CL structures reduced membrane/CL interfacial H + transport resistance. Furthermore, varying the ionomer concentration in the stock solution revealed how associated micellar structural changes in the ionomer influence fuel cell performance. These findings show that optimizing solvent composition and dispersion conditions based on Pt/C characteristics enables control of ink microstructure and ionomer distribution in the CL, resulting in a well-balanced improvement in both fuel cell performance and sedimentation stability. Reference [1] S. A. Berlinger, S. Garg, and A. Z. Weber, Curr. Opin. Electrochem ., 29 , 100744 (2021). [2] S. Yoshino, M. Harada, N. Hasegawa, and R. Jinnouchi, Colloids Surf., A , 667 , 127153 (2024). [3] S. Takahashi, T. Mashio, N. Horibe, K. Akizuki, and A. Ohma, ChemElectroChem , 2 , 1560 (2015). [4] A. Kobayashi, T. Fujii, C. Harada, E. Yasumoto, K. Takeda, K. Kakinuma, and M. Uchida, ACS Appl. Energy Mater ., 4 , 2307 (2021). [5] R. Jinnouchi, K. Kudo, K. Kodama, N. Kitano, T. Suzuki, S. Minami, K. Shinozaki, N. Hasegawa, and A. Shinohara, Nat. Commun ., 12 , 4956 (2021). [7] T. Van Cleve, S. Khandavalli, A. Chowdhury, S. Medina, S. Pylypenko, M. Wang, K. L. More, N. Kariuki, D. J. Myers, A. Z. Weber, S. A. Mauger, M. Ulsh, and K. C. Neyerlin, ACS Appl. Mater. Interfaces , 11 , 46953 (2019). [8] M. Wang, J. H. Park, S. Kabir, K. C. Neyerlin, N. N. Kariuki, H. Lv, V. R. Stamenkovic, D. J. Myers, M. Ulsh, and S. A. Mauger, ACS Appl. Energy Mater ., 2 , 6417 (2019). [9] H. Ren, Y. Teng, X. Meng, D. Fang, H. Huang, J. Geng, and Z. Shao, J. Power Sources, 506 (2021). [10] M. Harada, S. Kajiya, T. Mitsuoka, S.-i. Takata, H. Iwase, and H. Aoki, Colloids Surf., A , 665 , 131183 (2023).

  • Open Access

    Influence of Ionomer Content in Pt/mesoporous SnO2 Electrodes on PEM Fuel Cell Performance

    by Ryuichi Murase, Masanori Inaba, Yoriko Matsuoka, Yuji Kamitaka, Shuhei Yoshino, Akihiko Koiwai, Tomohiro Takeshita, Kensaku Kodama

    The search for more durable supports for oxygen reduction reaction (ORR) catalyst is a topic of increasing importance in the development of polymer electrolyte fuel cells (PEFCs). Recently, tin oxide (SnO2) supports have garnered attention because of their high oxidative stability. However, improving their cell performance, particularly under wet conditions, remains a challenge before their successful deployment. Herein, we expand on our previous work on carbon-free mesoporous SnO2-based catalyst supports and investigate the effects of ionomer content on ORR performance and cathode catalyst layer (CCL) structure. Optimization of the ionomer content resulted in a more uniform ionomer distribution and alleviation of CCL flooding and a 2-fold increase in catalytic activity under wet conditions. As a result, the mesoporous SnO2-based catalyst supports exhibited comparable performance to solid-core carbon supports under both wet and dry conditions. Finally, we present a summary of our progress on the development of mesoporous SnO2-based catalyst support and highlight critical areas of improvements needed towards their future deployment.


  • The Impact of Support Carbon Properties on Ionomer Adsorption on Pt/C in Polymer Electrolyte Fuel Cell Catalyst Ink

    by Shuhei Yoshino, Masashi Harada, Naoki Hasegawa, Shuji Yomo, Akihiko Koiwai, Shunsuke Yamakawa, Ryosuke Jinnouchi

    In polymer electrolyte fuel cells, both the coatability and dispersion stability of catalyst inks, as well as the structure of the catalyst layers, are significantly influenced by the agglomerate structure of the platinum-supported carbon (Pt/C) in the catalyst ink. The previous study reported that the ionomer adsorbed onto the Pt/C mainly determines this agglomerate structure. The study also presented that the ionomer adsorption is promoted by enhancing the solvent polarity, via intensifying hydrophobic interactions between the carbon and the ionomer backbone [1]. However, little is known about the impact of Pt/C aggregate properties, such as size, surface area, and surface hydrophobicity. The aggregate is the indivisible building block of the agglomerate, serving as the site where the ionomer adsorbs, and is composed of primary particles. Here, we present the impact of Pt/C properties on the ionomer adsorption. As shown in Fig. 1, the measured ionomer adsorption ratio Γ, which is defined as the ratio of the adsorbed ionomer to the total ionomer in the catalyst ink, can be accurately described as following Eq. (1),which is illustrated in Fig. 2, where Df and Ragg are the fractal dimension and radius of Pt/C aggregate, Am is the specific surface area of support carbon excluding the mesopore surface area (< 5 nm),ρacid is the surface density of the acidic functional groups on the carbon surface, and ρmax acid is the maximum value of at which ionomer adsorption ceases. The coefficients C0 and C1 are the parameters optimized to reproduce the measured Γ. The function represents the relationship between Γ and each property of the Pt/C particles as depicted in Fig. 3. As the surface area of support carbon increases, support carbon becomes capable of adsorbing more ionomers. Hence, Γ is proportional to Am. On the contrary, as the Pt/C aggregate, which consists of primarily particles, becomes larger and/or exhibits higher fractal dimension, Γ decreases because ionomers cannot penetrate into the interiors of aggregates. Hence, Γ is inversely proportional to Df and Ragg. In addition, Γ is also influenced by the hydrophilicity of carbon surfaces. In ρacid < ρmax acid, the carbon can adsorb a nearly constant amount of ionomer regardless of via hydrophobic interactions, while the amount sharply decreases in ρacid ≥ ρmax acid. The stepwise behavior is represented by 1 / (1+C0 exp⁡{-k(1-ρacid /ρmax acid)}). Eq. (1) reasonably represents the observed trends and is highly beneficial to design the Pt/C agglomerate structure allowing for stable processing and high performance. Reference [1] Yoshino, S.; Harada, M.; Hasegawa, N.; Jinnouchi, R. Effects of Solvent Composition on Agglomerate Structure in Catalyst Ink for Polymer Electrolyte Fuel Cells. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2024, 133847. DOI: https://doi.org/10.1016/j.colsurfa.2024.133847. Figure 1


  • Design of Carbon Aggregation Structure in Polymer Electrolyte Fuel Cell Catalyst Ink by Solvent Hydrophilicity

    by Shuhei Yoshino, Masashi Harada, Naoki Hasegawa, Ryosuke Jinnouchi

    Controlling the porous structure of the cathode catalyst layer in a polymer electrolyte fuel cell is essential to reduce the reaction and mass transport resistance of the oxygen reduction reaction. As the catalyst layer is a coating of a catalyst ink, the aggregation structure of platinum-supported carbon (Pt/C) and ionomer in ink is a key property for achieving the optimal catalyst layer.1 Previous studies reported that the weight fraction of water in solvents could control aggregation structure in ink.2-4 For example, Kumano et al.2 reported that increasing the water ratio to 1-propanol enhances the ionomer adsorption on Pt/C (Γ) and dispersion of Pt/C, causing the lowering of the viscosity of the inks. Based on the results, they speculated that water repels ionomers and promotes their adsorption on Pt/C particles. They further speculated that the ionomers adsorbed on the Pt/C particles induce repulsive interactions between Pt/C particles via electrostatic repulsive interactions among sulfonate groups of adsorber ionomers. By the enhanced repulsive interactions, Pt/C particles are dispersed, and viscosity decreases. The discussion in the previous study likely indicates that the hydrophilicity of the solvent is an essential factor controlling the aggregation structure of catalyst ink. Here, we verify this hypothesis. As a universal indicator of the hydrophilicity, we adopt the hydrogen-bond term HSP-δH of the Hansen solubility parameters. We examined how HSP-δH is correlated to the ionomer adsorption ratio to Pt/C (Γ), viscoelasticity of ink, and structural properties of ink measured by ultra-small angle X-ray scattering (USAXS). The catalyst inks were prepared by mixing Pt/C (TEC10V30E, TKK), Nafion 20 wt% solution (DE2020, Chemours), ultrapure water, and three different alcohols [ethanol (EtOH), 1-propanol (PrOH) and diacetone alcohol (DAA)]. The water weight fraction in the solvents was set to 25 - 85 wt%. Γ is plotted as a function of HSP-δH in Fig. 1. Regardless of the alcohol species, Γ increases with increasing HSP-δH. The trend is consistent with the previously reported trend observed in the mixtures of water and 1-propanol. Figures 2 (a) and (b) show the equilibrium storage modulus G’0 obtained by the rheometer and the fractal dimension D 2 of agglomerates of Pt/C particles in ink as functions of Γ. Here, D 2 is determined by fitting the unified model5 to the USAXS spectrum obtained by the synchrotron radiation (Spring-8, Japan). Both decreases with the increase of Γ. The lowering of D 2 indicates that the agglomerates of Pt/C particles are dispersed and turn to less-structured particles, as schematically shown in Fig. 2 (c). By the dispersion, G’0 decreases. Accordingly, the hydrophilicity, indeed, promotes the ionomer adsorption, and the adsorption induces the dispersion. The hydrophilicity is a key factor controlling the structure and rheology of the catalyst ink, and HSP-δH is a universal descriptor of hydrophilicity. Reference K. B. Hatzell, M. B. Dixit, S. A. Berlinger, and A. Z. Weber, J. Mater. Chem. A, 5 (39), 20527-20533 (2017). N. Kumano, K. Kudo, Y. Akimoto, M. Ishii, and H. Nakamura, Carbon, 169 429-439 (2020). S. Takahashi, T. Mashio, N. Horibe, K. Akizuki, and A. Ohma, ChemElectroChem, 2 (10), 1560-1567 (2015). T. Van Cleve, S. Khandavalli, A. Chowdhury, S. Medina, S. Pylypenko, M. Wang, K. L. More, N. Kariuki, D. J. Myers, A. Z. Weber, S. A. Mauger, M. Ulsh, and K. C. Neyerlin, ACS Appl Mater Interfaces, 11 (50), 46953-46964 (2019). G. Beaucage, H. K. Kammler, and S. E. Pratsinis, J. Appl. Crystallogr., 37 (4), 523-535 (2004). Figure captions Figure 1 Dependence of the ionomer adsorption ratio Γ on the HSP-δH of the catalyst ink solvent. Figure 2 (a) Γ dependence of the equilibrium storage modulus G’0 of the catalyst inks. G’0 is plotted on a logarithmic scale. G’0 values of inks that are not measurable due to being less than the measurable lower limit are conventionally described as 0. (b) Γ dependence of the mass fractal D 2 of Pt/C aggregates in the inks. (c) Schematic illustration of the aggregation structure of Pt/C in the solvents. Figure 1

  • Open Access

    189 Flexible, miniature biofuel cell

    by Takuya Ofuji, Shuhei Yoshino, Koichiro Kato, Takeo Miyake, Hirokazu Kaji, Matsuhiko Nishizawa