The Effects of Incorporating Ag-Zn Zeolite on the Surface Roughness and Hardness of Heat and Cold Cure Acrylic Resins
Open Access
- 9 March 2022
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 6 (3) , 85
Abstract
One of the most widely used materials for the fabrication of prosthetic dental parts is acrylic resin. Its reasonable mechanical and physical properties make it a popular material for a wide range of dental applications. Recently, many attempts have been made to improve the mechanical and biological properties of this material, such as by adding fibres, nanoparticles, and nanotubes. The current study aimed to evaluate the effects of adding an antimicrobial agent, Ag-Zn zeolite, on the surface roughness and hardness of the denture base resins. Ag-Zn zeolite particles were chemically prepared and added at different concentrations (0.50 wt.% and 0.75 wt.%) to the heat cure (HC) and cold cure (CC) acrylic resins. Zeolite particles were characterized and confirmed using X-ray diffraction (XRD) and Energy-Dispersive X-ray Spectroscopy (EDX) attached with a Scanning Electron Microscope (SEM). Sixty disk shape specimens (40 mm diameter and 2 mm thickness) were fabricated from the HC and CC resins with and without the zeolite. All the specimens were divided into two main groups based on the acrylic resins, then each was subdivided into three groups (n = 10) according to the concentration of the Ag-Zn zeolite. A surface roughness and a hardness tester were used to measure the surface finish and hardness of the specimens. The analysed data showed that the surface roughness values significantly decreased when 0.50 wt.% and 0.75 wt.% zeolite were incorporated in the HC resin specimens compared to the control group. However, this reduction was not significant in the case of CC resin, while the surface hardness was significantly improved after incorporating 0.50 wt.% and 0.75 wt.% zeolite for both the CC and HC resins. Incorporating Ag-Zn zeolite with acrylic resin materials could be beneficial for improving their surface finish and resistance to surface damage as defined by the higher hardness.Keywords
This publication has 33 references indexed in Scilit:
- Effects of fluconazole, chlorhexidine gluconate, and silver-zinc zeolite on flexural strength of heat-cured polymethyl methacrylate resinJournal of Natural Science, Biology and Medicine, 2015
- Development of a novel resin with antimicrobial properties for dental applicationJournal of Applied Oral Science, 2014
- The Effect of Silicon Di Oxide Nano - Fillers Reinforcement on Some Properties of Heat Cure Polymethyl Methacrylate Denture Base MaterialJournal of Baghdad College of Dentistry, 2014
- Zeolite-polyamide thin film nanocomposite membranes: Towards enhanced performance for forward osmosisJournal of Membrane Science, 2012
- Antibacterial and anti-adhesive zeolite coatings on titanium alloy surfaceMicroporous and Mesoporous Materials, 2011
- Biocompatible Metal-Oxide Nanoparticles: Nanotechnology Improvement of Conventional Prosthetic Acrylic ResinsJournal of Nanomaterials, 2010
- Antimicrobial and mechanical properties of acrylic resins with incorporated silver–zinc zeolite – part IGerodontology, 2008
- The Effect of Different Ratios of Zeolite Content in the Phosphate-Bonded Investment on Surface Roughness and Dimensional Change of the CastingKey Engineering Materials, 2007
- The Material and Antifungal Properties of Antibiotic Zeolite Incorporated Acrylic Resin.Nihon Hotetsu Shika Gakkai Zasshi, 1995
- A new visible light-cured resin system applied to removable prosthodonticsThe Journal of Prosthetic Dentistry, 1986