Investigation of a Multi-Gap, High-Voltage Isolator for a Gyro-TWT With Depressed Collector
- 2 October 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (11) , 5952-5958
Abstract
The depressed collector is an effective approach to further improve the overall efficiency of high-frequency gyrotron traveling wave tubes (gyro-TWTs). In this article, a multi-gap output isolator is proposed. With similar topologies based on the single-gap output isolator, the multi-gap output isolator offers advantages such as high breakdown voltage, improved microwave transmission, and reduced microwave leakage. The Q -band TE $_{\text{01}}$ mode single gap (gap of 2.2 $\times$ 1 mm) and triple gap (gap of 1 $\times$ 3 mm) output isolators are designed and compared in terms of microwave performance and breakdown voltage. Then microwave amplification and beam energy recovery are discussed based on a Q -band gyro-TWT with a triple-gap output isolator. Simulation results demonstrate that when driven by a 60-kV to 9.65-A electron beam, the device can stably produce a maximum output power of 205 and 193 kW of recycled power at 47 GHz with a 20-kV depressed collector. The overall efficiency is effectively increased from 35.4% to 53.1%. The mode converter and triple-gap output isolator are fabricated and experimented. Cold test results show that $\textit{S}_{\text{11}}$ is lower than $-$ 13 dB, $\textit{S}_{\text{21}}$ is greater than $-$ 1.3 dB, and are in good agreement with the simulation results. Furthermore, a maximum breakdown voltage of 70.7 kV is measured in the experiment. These investigations provide ideas for achieving efficient operation of high-frequency gyro-TWTs.Keywords
Funding Information
- Sichuan Science and Technology Program (2021YFSY0062)
This publication has 22 references indexed in Scilit:
- Roadmap of Terahertz Imaging 2021Sensors, 2021
- Generation of 1.5 MW–140 GHz Pulses With the Modular Pre-Prototype Gyrotron for W7-XIEEE Electron Device Letters, 2021
- Design and Experiment of a 200-kW Q-Band Gyro-TWTIEEE Transactions on Electron Devices, 2020
- CW Operation of a W-Band High-Gain Helical-Waveguide Gyrotron Traveling-Wave TubeIEEE Electron Device Letters, 2020
- State-of-the-Art of High-Power Gyro-Devices and Free Electron MasersJournal of Infrared, Millimeter, and Terahertz Waves, 2020
- Design and Test of Broadband Rectangular Waveguide TE10 to Circular Waveguide TE21 and TE01 Mode ConvertersIEEE Transactions on Electron Devices, 2019
- Terahertz Conductivity of Copper SurfacesIEEE Transactions on Terahertz Science and Technology, 2015
- Ka-Band Gyrotron Traveling-Wave Tubes With the Highest Continuous-Wave and Average PowerIEEE Transactions on Electron Devices, 2014
- The Gyrotron at 50: Historical OverviewJournal of Infrared, Millimeter, and Terahertz Waves, 2014
- Reliability Test of the 170GHz Gyrotron for ITERJournal of Infrared, Millimeter, and Terahertz Waves, 2010