Research on the Pore Evolution of Oil Shale under Different Thermal Treatment Temperatures Using NMR and FE-SEM Methods
Authors:
Open Access
Abstract
Underground in situ pyrolysis for oil shale extraction is currently significant; the evolutions in microstructure, porosity, and permeability parameters are essential factors in evaluating the productivity of oil shale after pyrolysis. With the underground oil shale reservoir core, obtained from Jimsar Sag in the Junggar Basin in China, as the research object, the samples were subjected to the treatment at different high temperatures (400°C, 500°C, 600°C, and 700°C). The NMR and FE-SEM experiments on oil shale samples were conducted; the relaxation spectra, pore size distribution, and porosity and permeability variation were analyzed; and the relationships between movable fluid saturation and porosity and permeability were established, respectively. The results showed that when the thermal treatment temperature increased, the porosity and permeability of oil shale rose continuously but showed different laws. With the temperature being lower than 400°C, the porosity increased slowly, and the growth rate of porosity increased rapidly when the thermal treatment temperature was higher than 500°C. In the pyrolysis temperature range of 25°C~400°C, the growth rate of permeability was relatively slow. With the continuously enhancing temperature (500°C~600°C), the growth rate of permeability accelerated rapidly. When the temperature continued to rise (700°C), the increase of permeability began to slow down. There is a nonlinear correlation between porosity and movable fluid saturation and an approximately linear correlation between permeability and movable fluid saturation. The findings showed that 600°C was the suitable temperature for the pyrolysis of oil shale.Keywords
Funding Information
- National Natural Science Foundation of China (52004013)
This publication has 29 references indexed in Scilit:
- Advances in understanding imbibition characteristics of shale using an NMR technique: a comparative study of marine and continental shaleJournal of Geophysics and Engineering, 2018
- Application of NMRT2to Pore Size Distribution and Movable Fluid Distribution in Tight SandstonesEnergy & Fuels, 2018
- Microstructural imaging and characterization of oil shale before and after pyrolysisFuel, 2017
- Petrophysical characterization of Chinese coal cores with heat treatment by nuclear magnetic resonanceFuel, 2013
- Characterization of oil shale pore structure before and after pyrolysis by using X-ray micro CTFuel, 2013
- Comparison of Heating Methods for In-situ Oil Shale Extraction2013
- EDITOR’S PAGE. DOES OIL SHALE HAVE A SIGNIFICANT FUTURE?; pp. 1–5Oil Shale, 2013
- Investigation of Chinese oil shale resources comprehensive utilization performanceEnergy, 2012
- Effect of oil shale retorting temperature on shale oil yield and propertiesFuel, 2012
- THERMAL CRACKING AND CORRESPONDING PERMEABILITY OF FUSHUN OIL SHALE; pp. 273–283Oil Shale, 2011