The Role of Ti Buffer Layer Thickness on the Resistive Switching Properties of Hafnium Oxide-Based Resistive Switching Memories
- 1 May 2017
- journal article
- research article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 33 (19) , 4654-4665
Abstract
Ti/HfOx-based resistive random access memory (RRAM) has been extensively investigated as an emerging nonvolatile memory (NVM) candidate due to its excellent memory performance and CMOS process compatibility. Although the importance of the role of the Ti buffer layer is well recognized, detailed understanding about the nature of Ti thickness-dependent asymmetric switching is still missing. To realize this, the present work addresses the effects of Ti buffer layer thickness on the switching properties of TiN/Ti/HfOx/TiN 1T1R RRAM. Consequently, we have demonstrated a simple strategy to regulate the FORMING voltage, leakage current, memory window, and decrease the operation current, etc. by varying the thickness of the Ti layer on the HfOx dielectrics. Accordingly, controllable and reliable bipolar, complementary, and reverse bipolar resistive switching (BRS, CRS, and R-BRS) properties have been demonstrated. This work also provides the direction to avoid unwanted CRS properties during the first RESET operation by decreasing the FORMING voltage. Furthermore, the memory device shows good nonvolatility at ∼1 μA programming current by selecting a proper thickness of Ti buffer layer. To achieve reliable BRS properties for low power application, the operation current has been further optimized, whereas the memory device shows pulse endurance of more than 7 million cycles at a low pulse width of 50 ns and excellent data retention properties of more than 40 h at 150 °C measurement temperature.Keywords
Funding Information
- Industrial Technology Research Institute
This publication has 56 references indexed in Scilit:
- Resistive switching memories based on metal oxides: mechanisms, reliability and scalingSemiconductor Science and Technology, 2016
- Recent progress in resistive random access memories: Materials, switching mechanisms, and performanceMaterials Science and Engineering: R: Reports, 2014
- Metal–Oxide RRAMProceedings of the IEEE, 2012
- 10×10nm2 Hf/HfOx crossbar resistive RAM with excellent performance, reliability and low-energy operation2011
- Evidence and solution of over-RESET problem for HfOX based resistive memory with sub-ns switching speed and high endurance2010
- Low power operating bipolar TMO ReRAM for sub 10 nm era2010
- Low power and high speed bipolar switching with a thin reactive Ti buffer layer in robust HfO2 based RRAM2008
- Memristive switching mechanism for metal/oxide/metal nanodevicesNature Nanotechnology, 2008
- Resistive switching in transition metal oxidesMaterials Today, 2008
- Nanoionics-based resistive switching memoriesNature Materials, 2007