SRSheikh Ziaur Rahaman

Sheikh Ziaur Rahaman

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Sheikh Ziaur Rahaman has a total of 149 co-authors. Here are the top co-authors by number of shared publications:

  • Siddheswar Maikap

    Department of Electronic Engineering, Chang Gung University, Taoyuan, Taiwan

    26 shared publications
  • F. T. Chen

    Electronics and Optoelectronics Research Laboratory, Industrial Technology Research Institute

    8 shared publications
  • H. Y. Lee

    Electronics and Optoelectronics Research Laboratory, Industrial Technology Research Institute

    8 shared publications
  • Heng-Yuan Lee

    Electronic and Optoelectronic System Research Laboratories, Industrial Technology Research Institute 1 , Hsinchu 310, Taiwan

    8 shared publications
  • W. S. Chen

    Electronics and Optoelectronics Research Laboratory, Industrial Technology Research Institute

    8 shared publications
  • Wei-Su Chen

    Electronic and Optoelectronic System Research Laboratories, Industrial Technology Research Institute 1 , Hsinchu 310, Taiwan

    8 shared publications

Latest Publications

  • Open Access

    Size-Dependent Switching Properties of Spin-Orbit Torque MRAM With Manufacturing-Friendly 8-Inch Wafer-Level Uniformity

    by Sk Ziaur Rahaman, I.-Jung Wang, Ding-Yeong Wang, Chi-Feng Pai, Yu-Chen Hsin, Shan-Yi Yang, Hsin-Han Lee, Yao-Jen Chang, Yi-Ching Kuo, Yi-Hui Su, et al.

    We have developed a manufacturing-friendly spin-orbit torque magnetic random access memory (SOT-MRAM) technology in CMOS compatible 8-inch fab process. The proposed SOT-MRAM process technology resolves etching non-uniformity and reduction of high resistivity heavy-metal nanowire resistance issues. Besides, we present device size-dependent switching current threshold in the proposed SOT-MRAM cell structure. To realize the potential of our fabricated SOT-MRAM, wafer-level uniformity, cycling and temperature dependence SOT switching have been comprehensively investigated. Furthermore, the thermal stability factor () was calculated from temperature-dependence SOT switching to fulfill the thermal stability criteria i.e., >10 years of this emerging SOT-MRAM technology.


  • Pulse-Width and Temperature Effect on the Switching Behavior of an Etch-Stop-on-MgO-Barrier Spin-Orbit Torque MRAM Cell

    by Sk. Ziaur Rahaman, I-Jung Wang, Tian-Yue Chen, Chi-Feng Pai, Ding-Yeong Wang, Jeng-Hua Wei, Hsin-Han Lee, Yu-Chen Hsin, Yao-Jen Chang, Shan-Yi Yang, et al.

    In this letter, we present a novel step spin-orbit torque magnetic random access memory (SOT-MRAM) cell structure and its switching behavior. A special stop-on-MgO etch etches away the hard mask and the pinned layer while retaining the free layer (FL) and MgO as part of the cell. The extended Ta/CoFeB/MgO layer is proved to be more tolerant to the etching non-uniformity of the Ta nanowire and improve etching yield. Although etching stops on MgO, the FL underneath the thin MgO has been rendered non-magnetic by the etching process. Recessed Cu pads were added to the Ta nanowire, which substantially reduces the overall resistance of the Ta nanowire. The general switching behavior of the step SOT-MRAM cells, such as pulse-width and temperature dependence of the switching currents, resembles that of a spin-transfer torque MRAM cell.


  • Open Access

    Understanding of multi-level resistive switching mechanism in GeOx through redox reaction in H2O2/sarcosine prostate cancer biomarker detection

    by Subhranu Samanta, Sheikh Ziaur Rahaman, Anisha Roy, Surajit Jana, Somsubhra Chakrabarti, Rajeswar Panja, Sourav Roy, Mrinmoy Dutta, Sreekanth Ginnaram, Amit Prakash, et al.

    Formation-free multi-level resistive switching characteristics by using 10 nm-thick polycrystalline GeOx film in a simple W/GeOx/W structure and understanding of switching mechanism through redox reaction in H2O2/sarcosine sensing (or changing Ge°/Ge4+ oxidation states under external bias) have been reported for the first time. Oxidation states of Ge0/Ge4+ are confirmed by both XPS and H2O2 sensing of GeOx membrane in electrolyte-insulator-semiconductor structure. Highly repeatable 1000 dc cycles and stable program/erase (P/E) endurance of >106 cycles at a small pulse width of 100 ns are achieved at a low operation current of 0.1 µA. The thickness of GeOx layer is found to be increased to 12.5 nm with the reduction of polycrystalline grain size of 6 cycles, which is observed by high-resolution TEM. The switching mechanism is explored through redox reaction in GeOx membrane by sensing 1 nM H2O2, which is owing to the change of oxidation states from Ge0 to Ge4+ because of the enhanced O2− ions migration in memory device under external bias. In addition, sarcosine as a prostate cancer biomarker with low concentration of 50 pM to 10 µM is also detected.


  • Open Access

    Retention Model of TaO/HfO x and TaO/AlO x RRAM with Self-Rectifying Switch Characteristics

    by Yu-De Lin, Pang-Shiu Chen, Heng-Yuan Lee, Yu-Sheng Chen, Sk. Ziaur Rahaman, Kan-Hsueh Tsai, Chien-Hua Hsu, Wei-Su Chen, Pei-Hua Wang, Ya-Chin King, et al.

    A retention behavior model for self-rectifying TaO/HfO x - and TaO/AlO x -based resistive random-access memory (RRAM) is proposed. Trapping-type RRAM can have a high resistance state (HRS) and a low resistance state (LRS); the degradation in a LRS is usually more severe than that in a HRS, because the LRS during the SET process is limited by the internal resistor layer. However, if TaO/AlO x elements are stacked in layers, the LRS retention can be improved. The LRS retention time estimated by extrapolation method is more than 5 years at room temperature. Both TaO/HfO x - and TaO/AlO x -based RRAM structures have the same capping layer of TaO, and the activation energy levels of both types of structures are 0.38 eV. Moreover, the additional AlO x switching layer of a TaO/AlO x structure creates a higher O diffusion barrier that can substantially enhance retention, and the TaO/AlO x structure also shows a quite stable LRS under biased conditions.


  • Scalability and reliability issues of Ti/HfOx-based 1T1R bipolar RRAM: Occurrence, mitigation, and solution

    by Sk. Ziaur Rahaman, Heng-Yuan Lee, Yu-Sheng Chen, Yu-De Lin, Pang-Shiu Chen, Wei-Su Chen, Pei-Hua Wang

    Scalability and reliability issues are the most dominant obstacle for the development of resistive switching memory (RRAM) technology. Owing to the excellent memory performance and process compatibility with current CMOS technology of Ti/HfOx-based filamentary type bipolar RRAM, its scalability and reliability issues have been investigated in this document. Towards this goal, we demonstrate that there exists a clear correlation between the transistor and memory cell, which ultimately limits the scaling in terms of operation current and size of the transistor as well and performance of the Ti/HfOx-based 1T1R bipolar RRAM. Due to the resemblance of switching behaviour between complementary resistive switching, i.e., CRS in a single memory stack, and bipolar resistive switching, the Ti/HfOx-based bipolar RRAM suffers from resistance pinning (RP) issues, whereas the minimum resistance during the 1st RESET operation always impeded below 20 kΩ; this occurs through the interaction between the transistor and memory cell during the FORMING process. However, a sufficiently lower FORMING voltage can mitigate the RP issue occurring in Ti/HfOx-based bipolar RRAM and an alternative Ta buffer layer over HfOx dielectrics is proposed to prevent the activation of self-CRS in the memory cell during the FORMING process.


  • The Role of Ti Buffer Layer Thickness on the Resistive Switching Properties of Hafnium Oxide-Based Resistive Switching Memories

    by Sk. Ziaur Rahaman, Yu-De Lin, Heng-Yuan Lee, Yu-Sheng Chen, Pang-Shiu Chen, Wei-Su Chen, Chien-Hua Hsu, Kan-Hsueh Tsai, Ming-Jinn Tsai, Pei-Hua Wang

    Ti/HfOx-based resistive random access memory (RRAM) has been extensively investigated as an emerging nonvolatile memory (NVM) candidate due to its excellent memory performance and CMOS process compatibility. Although the importance of the role of the Ti buffer layer is well recognized, detailed understanding about the nature of Ti thickness-dependent asymmetric switching is still missing. To realize this, the present work addresses the effects of Ti buffer layer thickness on the switching properties of TiN/Ti/HfOx/TiN 1T1R RRAM. Consequently, we have demonstrated a simple strategy to regulate the FORMING voltage, leakage current, memory window, and decrease the operation current, etc. by varying the thickness of the Ti layer on the HfOx dielectrics. Accordingly, controllable and reliable bipolar, complementary, and reverse bipolar resistive switching (BRS, CRS, and R-BRS) properties have been demonstrated. This work also provides the direction to avoid unwanted CRS properties during the first RESET operation by decreasing the FORMING voltage. Furthermore, the memory device shows good nonvolatility at ∼1 μA programming current by selecting a proper thickness of Ti buffer layer. To achieve reliable BRS properties for low power application, the operation current has been further optimized, whereas the memory device shows pulse endurance of more than 7 million cycles at a low pulse width of 50 ns and excellent data retention properties of more than 40 h at 150 °C measurement temperature.


  • Occurrence and solution to overcome 1stRESET resistance pinning effect in Ti/HfOx based RRAM for low power nonvolatile memory applications

    by Sk. Ziaur Rahaman, Heng-Yuan Lee, Yu-De Lin, Chien-Hua Hsu, Kan-Hsueh Tsai, Wei-Su Chen, Yu-Sheng Chen, Pang-Shiu Chen, Pei-Hua Wang

    We have optimized the operation current to obtain stable endurance and retention properties in Ti/HfO x -based bipolar RRAM for future low power nonvolatile memory applications. Furthermore, the 1 st RESET resistance pinning effect after the FORMING process at lower current is greatly improved by selecting the Ti/HfO x thickness ratio in TiN/Ti/HfO x /TiN 1T1R RRAM. Thus, in order to achieve the reliable switching at low operation current, the design of the memory element is crucial.


  • Open Access

    Temperature-Dependent Non-linear Resistive Switching Characteristics and Mechanism Using a New W/WO3/WOx/W Structure

    by Somsubhra Chakrabarti, Subhranu Samanta, Siddheswar Maikap, Sheikh Ziaur Rahaman, Hsin-Ming Cheng

    Post-metal annealing temperature-dependent forming-free resistive switching memory characteristics, Fowler-Nordheim (F-N) tunneling at low resistance state, and after reset using a new W/WO3/WOx/W structure have been investigated for the first time. Transmission electron microscope image shows a polycrystalline WO3/WOx layer in a device with a size of 150 × 150 nm2. The composition of WO3/WOx is confirmed by X-ray photo-electron spectroscopy. Non-linear bipolar resistive switching characteristics have been simulated using space-charge limited current (SCLC) conduction at low voltage, F-N tunneling at higher voltage regions, and hopping conduction during reset, which is well fitted with experimental current-voltage characteristics. The barrier height at the WOx/W interface for the devices annealed at 500 °C is lower than those of the as-deposited and annealed at 400 °C (0.63 vs. 1.03 eV). An oxygen-vacant conducting filament with a diameter of ~34 nm is formed/ruptured into the WO3/WOx bilayer owing to oxygen ion migration under external bias as well as barrier height changes for high-resistance to low-resistance states. In addition, the switching mechanism including the easy method has been explored through the current-voltage simulation. The devices annealed at 500 °C have a lower operation voltage, lower barrier height, and higher non-linearity factor, which are beneficial for selector-less crossbar memory arrays.


  • Effect of Ti buffer layer on HfOx-based bipolar and complementary resistive switching for future memory applications

    by Sk. Ziaur Rahaman, Yu-De Lin, Pei-Yi Gu, Heng-Yuan Lee, Yu-Sheng Chen, Pan-Shiu Chen, Kan-Hsueh Tsai, Wei-Su Chen, Chien-Hua Hsu, Po-Tsung Tu, et al.

    This paper investigates the Ti thickness modulation based simple strategy to regulate the oxygen vacancy concentration in the HfO x film and implemented to realize the resistive switching properties. Accordingly, we demonstrated a way to control the forming voltage, decrease the operation current to sub-μA level, controllable BRS/CRS and to bypass the self-CRS phenomena in Ti/HfO x based 1T1R RRAM devices for future memory applications.


  • Open Access

    Resistive and New Optical Switching Memory Characteristics Using Thermally Grown Ge0.2Se0.8 Film in Cu/GeSex/W Structure

    by Debanjan Jana, Somsubhra Chakrabarti, Sheikh Ziaur Rahaman, Siddheswar Maikap

    It is known that conductive-bridge resistive-random-access-memory (CBRAM) device is very important for future high-density nonvolatile memory as well as logic application. Even though the CBRAM devices using different materials, structures, and switching performance have been reported in Nanoscale Res. Lett., 2015, however, optical switching characteristics by using thermally grown Ge0.2Se0.8 film in Cu/GeSex/W structure are reported for the first time in this study. The Cu/GeSex/W memory devices have low current compliances (CCs) ranging from 1 nA to 500 μA with low voltage of ±1.2 V, high resistance ratio of approximately 103, stable endurance of >200 cycles, and good data retention of >7 × 103 s at 85 °C. Multi-steps of RESET phenomena and evolution of Cu filaments’ shape under CCs ranging from 1 nA to 500 μA have been discussed. Under external white-light illumination with an intensity of 2.68 mW/cm2 (wavelength ranges from 390 to 700 nm), memory device shows optical switching with long read pulse endurance of >105 cycles. This CBRAM device has optically programmed and electrically erased, which can open up a new area of research field for future application.