Research on Mechanisms and Controlling Methods of Macro Defects in TC4 Alloy Fabricated by Wire Additive Manufacturing
Open Access
Abstract
Wire feeding additive manufacturing (WFAM) has broad application prospects because of its advantages of low cost and high efficiency. However, with the mode of lateral wire feeding, including wire and laser additive manufacturing, gas tungsten arc additive manufacturing etc., it is easy to generate macro defects on the surface of the components because of the anisotropy of melted wire, which limits the promotion and application of WFAM. In this work, gas tungsten arc additive manufacturing with lateral wire feeding is proposed to investigate the mechanisms of macro defects. The results illustrate that the defect forms mainly include side spatters, collapse, poor flatness, and unmelted wire. It was found that the heat input, layer thickness, tool path, and wire curvature can have an impact on the macro defects. Side spatters are the most serious defects, mainly because the droplets cannot be transferred to the center of the molten pool in the lateral wire feeding mode. This research indicates that the macro defects can be controlled by optimizing the process parameters. Finally, block parts without macro defects were fabricated, which is meaningful for the further application of WFAM.Keywords
Funding Information
- National Natural Science Foundation of China (51505033)
- Natural Science Foundation of Beijing Municipality (3162027)
This publication has 23 references indexed in Scilit:
- Numerical analysis of heat transfer and fluid flow in multilayer deposition of PAW-based wire and arc additive manufacturingInternational Journal of Heat and Mass Transfer, 2018
- A layers-overlapping strategy for robotic wire and arc additive manufacturing of multi-layer multi-bead components with homogeneous layersThe International Journal of Advanced Manufacturing Technology, 2018
- Obtaining fine microstructure and unsupported overhangs by low heat input pulse arc additive manufacturingJournal of Manufacturing Processes, 2017
- Microstructure characterization of SS308LSi components manufactured by GTAW-based additive manufacturing: shaped metal deposition using pulsed current arcThe International Journal of Advanced Manufacturing Technology, 2016
- Wire-feed additive manufacturing of metal components: technologies, developments and future interestsThe International Journal of Advanced Manufacturing Technology, 2015
- Metal Additive Manufacturing: A ReviewJournal of Materials Engineering and Performance, 2014
- Vision-sensing and bead width control of a single-bead multi-layer part: material and energy savings in GMAW-based rapid manufacturingJournal of Cleaner Production, 2013
- Weld bead modeling and process optimization in Hybrid Layered ManufacturingComputer-Aided Design, 2011
- Electron beam‐melted, free‐form‐fabricated titanium alloy implants: Material surface characterization and early bone response in rabbitsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2008
- Optimization of pulsed GTA welding process parameters for the welding of AISI 304L stainless steel sheetsThe International Journal of Advanced Manufacturing Technology, 2008