JLJiping Lu

Jiping Lu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jiping Lu has a total of 47 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Remaining Useful Life Prediction for Two-Phase Nonlinear Degrading Systems with Three-Source Variability

    by Xuemiao Cui, Jiping Lu, Yafeng Han

    Recently, the estimation of remaining useful life (RUL) for two-phase nonlinear degrading devices has shown rising momentum for ensuring their safe and reliable operation. The degradation processes of such systems are influenced by the temporal variability, unit-to-unit variability, and measurement variability jointly. However, current studies only consider these three sources of variability partially. To this end, this paper presents a two-phase nonlinear degradation model with three-source variability based on the nonlinear Wiener process. Then, the approximate analytical solution of the RUL with three-source variability is derived under the concept of the first passage time (FPT). For better implementation, the offline model parameter estimation is conducted by the maximum likelihood estimation (MLE), and the Bayesian rule in conjunction with the Kalman filtering (KF) algorithm are utilized for the online model updating. Finally, the effectiveness of the proposed approach is validated through a numerical example and a practical case study of the capacitor degradation data. The results show that it is necessary to incorporate three-source variability simultaneously into the RUL prediction of the two-phase nonlinear degrading systems.


  • Open Access

    A Novel Unified Data Modeling Method for Equipment Lifecycle Integrated Logistics Support

    by Xuemiao Cui, Jiping Lu, Yafeng Han

    Integrated logistics support (ILS) is of great significance for maintaining equipment operational capability in the whole lifecycle. Numerous segments and complex product objects exist in the process of equipment ILS, which gives ILS data multi-source, heterogeneous, and multidimensional characteristics. The present ILS data cannot satisfy the demand for efficient utilization. Therefore, the unified modeling of ILS data is extremely urgent and significant. In this paper, a unified data modeling method is proposed to solve the consistent and comprehensive expression problem of ILS data. Firstly, a four-tier unified data modeling framework is constructed based on the analysis of ILS data characteristics. Secondly, the Core unified data model, Domain unified data model, and Instantiated unified data model are built successively. Then, the expressions of ILS data in the three dimensions of time, product, and activity are analyzed. Thirdly, the Lifecycle ILS unified data model is constructed, and the multidimensional information retrieval methods are discussed. Based on these, different systems in the equipment ILS process can share a set of data models and provide ILS designers with relevant data through different views. Finally, the practical ILS data models are constructed based on the developed unified data modeling software prototype, which verifies the feasibility of the proposed method.

  • Open Access

    Multi-Stream Convolutional Neural Networks for Rotating Machinery Fault Diagnosis under Noise and Trend Items

    by Han Dong, Jiping Lu, Yafeng Han

    In recent years, rotating machinery fault diagnosis methods based on convolutional neural network have achieved much success. However, in real industrial environments, interfering signals are unavoidable, which may reduce the accuracy of fault diagnosis seriously. Most of the current fault diagnosis methods are of single input type, which may lead to the information contained in the vibration signal not being fully utilized. In this study, theoretical analysis and comprehensive comparative experiments are completed to investigate the time domain input, frequency domain input, and two types of time–frequency domain input. Based on this, a new fault diagnosis model, named multi-stream convolutional neural network, is developed. The model takes the time domain, frequency domain, and time–frequency domain images as input, and it automatically fuses the information contained in different inputs. The proposed model is tested based on three public datasets. The experimental results suggested that the model achieved pretty high accuracy under noise and trend items without the help of signal separation algorithms. In addition, the positive implications of multiple inputs and information fusion are analyzed through the visualization of learned features.


  • Open Access

    Investigation on Morphology and Mechanical Properties of Rod Units in Lattice Structures Fabricated by Selective Laser Melting

    by Chenchen Jing, Yanyan Zhu, Jie Wang, Feifan Wang, Jiping Lu, Changmeng Liu

    Selective laser melting (SLM) fabrication of lattice structures has attracted considerable interest due to its many immanent advantages, such as high specific strength. A wide variety of lattice structures have been designed and fabricated. However, as a vital prerequisite for design optimization, a clear relation between the process constraint of SLM and the apparent properties of the fabricated lattice structure has received much less attention. Therefore, this work systematically investigates the characterization and preformation of rod units, which are the basic components of lattice structures, so as to evaluate the SLM manufacturability of lattice structures. A series of rod units with different inclination angles and diameters were fabricated by SLM. Their morphology and mechanical properties were measured by scanning electron microscope observation and a tensile test, respectively. The inclination angle was found to have significant effects on profile error and little effect on mechanical properties. The higher the inclination angle, the larger the profile error. The characteristic diameter had no significant correlation with profile errors and mechanical properties. Based on systematic studies, a formula is proposed to evaluate the cross-sectional area of the fabricated rod units and further estimate their load capacity. This has important implications for optimizing the design of lattice structures fabricated by SLM.


  • Top Cited Papers
    Open Access

    Structural Design of Vascular Stents: A Review

    by Chen Pan, Yafeng Han, Jiping Lu

    Percutaneous Coronary Intervention (PCI) is currently the most conventional and effective method for clinically treating cardiovascular diseases such as atherosclerosis. Stent implantation, as one of the ways of PCI in the treatment of coronary artery diseases, has become a hot spot in scientific research with more and more patients suffering from cardiovascular diseases. However, vascular stent implanted into vessels of patients often causes complications such as In-Stent Restenosis (ISR). The vascular stent is one of the sophisticated medical devices, a reasonable structure of stent can effectively reduce the complications. In this paper, we introduce the evolution, performance evaluation standards, delivery and deployment, and manufacturing methods of vascular stents. Based on a large number of literature pieces, this paper focuses on designing structures of vascular stents in terms of “bridge (or link)” type, representative volume unit (RVE)/representative unit cell (RUC), and patient-specific stent. Finally, this paper gives an outlook on the future development of designing vascular stents.


  • Top Cited Papers
    Open Access

    Design and Optimization of Lattice Structures: A Review

    by Chen Pan, Yafeng Han, Jiping Lu

    Cellular structures consist of foams, honeycombs, and lattices. Lattices have many outstanding properties over foams and honeycombs, such as lightweight, high strength, absorbing energy, and reducing vibration, which has been extensively studied and concerned. Because of excellent properties, lattice structures have been widely used in aviation, bio-engineering, automation, and other industrial fields. In particular, the application of additive manufacturing (AM) technology used for fabricating lattice structures has pushed the development of designing lattice structures to a new stage and made a breakthrough progress. By searching a large number of research literature, the primary work of this paper reviews the lattice structures. First, based on the introductions about lattices of literature, the definition and classification of lattice structures are concluded. Lattice structures are divided into two general categories in this paper: uniform and non-uniform. Second, the performance and application of lattice structures are introduced in detail. In addition, the fabricating methods of lattice structures, i.e., traditional processing and additive manufacturing, are evaluated. Third, for uniform lattice structures, the main concern during design is to develop highly functional unit cells, which in this paper is summarized as three different methods, i.e., geometric unit cell based, mathematical algorithm generated, and topology optimization. Forth, non-uniform lattice structures are reviewed from two aspects of gradient and topology optimization. These methods include Voronoi-tessellation, size gradient method (SGM), size matching and scaling (SMS), and homogenization, optimization, and construction (HOC). Finally, the future development of lattice structures is prospected from different aspects.


  • Open Access

    Fabricating Pyramidal Lattice Structures of 304 L Stainless Steel by Wire Arc Additive Manufacturing

    by Haorui Zhang, Junjin Huang, Changmeng Liu, Yongsheng Ma, Yafeng Han, Tianqiu Xu, Jiping Lu, Hongli Fang

    Lattice structures have drawn considerable attention due to their superior mechanical properties. However, the existing fabrication methods for lattice structures require complex procedures, as they have low material utilization and lead to unreliable node connections, which greatly restricts their application. In this work, wire arc additive manufacturing is used to fabricate large-scale lattice structures efficiently, without any air holes between rods and panels. The principle and the process of fabricating the rods were analyzed systematically. The influence of the two most important parameters, including heat input and preset layer height, is disclosed. Through optical microscopy, the microstructure of the fabricated steel rods is found to consist of dendritic austenite and skeletal ferrite. The tensile strength of the rods can reach 603 MPa, and their elongation reaches 77%. These experimental results demonstrated the feasibility of fabricating lattice structures using wire arc additive manufacturing.


  • Open Access

    Residual Stress, Mechanical Properties, and Grain Morphology of Ti-6Al-4V Alloy Produced by Ultrasonic Impact Treatment Assisted Wire and Arc Additive Manufacturing

    by Yichong Yang, Xin Jin, Changmeng Liu, Muzheng Xiao, Jiping Lu, Hongli Fan, Shuyuan Ma

    Ultrasonic Impact Treatment (UIT) is an effective technique for surface refinement and residual stress reduction, which is widely used in welding. This study investigates UIT-assisted Wire and Arc Additive manufacturing (WAAM). The residual stress, grain morphology and mechanical properties of post-UIT and as-deposited samples are studied. The result demonstrates that the UIT has a significant influence on the decrease of the residual stress. Moreover, the residual stress of the post-UIT samples is much lower than that of the as-deposited samples. The samples fabricated by UIT-assisted WAAM have a novel, bamboo-like distribution of prior-β grains, an alternating distribution of short columnar grains and equiaxed grains. The grain size of this bamboo-like structure is much smaller than the coarsen columnar grains. In addition, the mechanical properties of the post-UIT and as-deposited samples are compared. The results indicate that the average tensile strength of the post-UIT samples is higher, while the average elongation of the post-UIT samples is lower.


  • Open Access

    Reducing Porosity and Refining Grains for Arc Additive Manufacturing Aluminum Alloy by Adjusting Arc Pulse Frequency and Current

    by Donghai Wang, Jiping Lu, Shuiyuan Tang, Lu Yu, Hongli Fan, Lei Ji, Changmeng Liu

    Coarse grains and gas pores are two main problems that limit the application of additive manufacturing aluminum alloys. To reduce porosity and refine grains, this paper presents a quantitative investigation into the effect of pulse frequency and arc current on the porosity and grains of arc additive manufacturing Al–5Si alloy. The experiment results show that pulse frequency and arc current have a significant impact on the macrostructure, microstructure, porosity, and tensile properties of the samples. Fine grains and a uniform microstructure can be obtained with low pulse frequency and low arc current as a result of the rapid cooling of the molten pool. With the increase of pulse frequency, density shows a trend that firstly escalates and attains the maximum value at 50 Hz, but later declines as a result of the relation between pores formation and gas escape. Moreover, better tensile properties can be obtained at low pulse frequency and low arc current because of the finer grains.


  • Open Access

    Research on Mechanisms and Controlling Methods of Macro Defects in TC4 Alloy Fabricated by Wire Additive Manufacturing

    by Lei Ji, Jiping Lu, Shuiyuan Tang, Qianru Wu, Jiachen Wang, Shuyuan Ma, Hongli Fan, Changmeng Liu

    Wire feeding additive manufacturing (WFAM) has broad application prospects because of its advantages of low cost and high efficiency. However, with the mode of lateral wire feeding, including wire and laser additive manufacturing, gas tungsten arc additive manufacturing etc., it is easy to generate macro defects on the surface of the components because of the anisotropy of melted wire, which limits the promotion and application of WFAM. In this work, gas tungsten arc additive manufacturing with lateral wire feeding is proposed to investigate the mechanisms of macro defects. The results illustrate that the defect forms mainly include side spatters, collapse, poor flatness, and unmelted wire. It was found that the heat input, layer thickness, tool path, and wire curvature can have an impact on the macro defects. Side spatters are the most serious defects, mainly because the droplets cannot be transferred to the center of the molten pool in the lateral wire feeding mode. This research indicates that the macro defects can be controlled by optimizing the process parameters. Finally, block parts without macro defects were fabricated, which is meaningful for the further application of WFAM.