A Method to Reduce PDN Impedance Based on Multicapacitor Loop Coupling
- 27 February 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (6) , 6586-6590
Abstract
As the target impedance of the power delivery network decreases, the demand for output decoupling capacitors proportionally increases. Parasitic inductance of the vias connecting the output capacitors to the motherboard has a more serious impact on the impedance design of power deliver network. To solve this problem, this letter proposes a novel layout method to reduce the value of parasitic inductance associated with the vias. The proposed method utilizes the coupling effect between the vias to reduce the equivalent inductance. Therefore, the proposed method is not only simple and easy to implement, but also saves space and cost by reducing the number of decoupling capacitors. Two 200-W experimental prototypes were fabricated to compare the conventional solution with the proposed reverse coupling method. The decoupling capacitance of the prototype using the reverse-coupled structure is 25.6% lower than the prototype using conventional forward-coupled method.Keywords
Funding Information
- National Natural Science Foundation of China (U23B20138)
This publication has 9 references indexed in Scilit:
- Mini-LEGO: A 1.5-MHz 240-A 48-V-to-1-V CPU VRM with 8.4-mm Height for Vertical Power Delivery2023
- A New Inductance Cancelation Scheme for Surface Mount Shunt Capacitor FiltersIEEE Transactions on Electromagnetic Compatibility, 2022
- Power Delivery for High-Performance Microprocessors—Challenges, Solutions, and Future TrendsIEEE Transactions on Components, Packaging and Manufacturing Technology, 2021
- Two-Stage 48-V VRM With Intermediate Bus Voltage Optimization for Data CentersIEEE Journal of Emerging and Selected Topics in Power Electronics, 2020
- High-Step-Down DC–DC Converter With Continuous Output Current Using Coupled-InductorsIEEE Transactions on Power Electronics, 2019
- Transient-Voltage-Clamp Circuit Design Based on Constant Load Line Impedance for Voltage Regulator ModuleIEEE Transactions on Industrial Electronics, 2010
- A Fabrication Method for Integrated Filter Elements With Inductance CancellationIEEE Transactions on Power Electronics, 2009
- Hybrid Power Filter with Output Impedance Control2006
- Cancellation of capacitor parasitic parameters for noise reduction applicationIEEE Transactions on Power Electronics, 2006