Magnetization characteristics of HTS-stacked ring magnets with and without HTS stack inserts
Open Access
- 24 August 2023
- journal article
- research article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (8)
Abstract
High-temperature superconducting (HTS) trapped field magnets can generate and maintain stable, high magnetic fields without requiring external power supplies. Recently, HTS-stacked ring magnets have garnered significant attention due to their flexible geometry, robust mechanical strength, and proven trapped field performance. In this study, we examine the magnetization characteristics of HTS-stacked ring magnets and observed a trapped field higher than the applied field during field cooling magnetization. We also observed that by inserting HTS stacks into the hollow cavity of the HTS-stacked rings, the center field ceased to exhibit an increased center field. Our analysis revealed that the unique induced current distribution and the penetration sequence are the underlying causes. Inspired by the investigation results, we explored deeper into the magnetization properties and identified that a final trapped field higher than the applied field can be achieved through proper design and magnetization of the HTS-stacked ring magnets. However, even though the trapped central field experiences an increase, this does not translate into an increment in the total trapped flux. Instead, a redistribution of the flux is observed. These findings hold significant implications for the design and application of superconducting magnets.Keywords
Funding Information
- Henry Royce Institute (EP/P024947/1)
This publication has 27 references indexed in Scilit:
- Trapping a magnetic field of 7.9 T using a bulk magnet fabricated from stack of coated conductorsPhysica C: Superconductivity and its Applications, 2016
- The use of buffer pellets to pseudo hot seed (RE)–Ba–Cu–O–(Ag) single grain bulk superconductorsSuperconductor Science and Technology, 2015
- A trapped field of 17.6 T in melt-processed, bulk Gd-Ba-Cu-O reinforced with shrink-fit steelSuperconductor Science and Technology, 2014
- Trapped fields up to 2 T in a 12 mm square stack of commercial superconducting tape using pulsed field magnetizationSuperconductor Science and Technology, 2013
- An overview of rotating machine systems with high-temperature bulk superconductorsSuperconductor Science and Technology, 2012
- Superconductor bearings, flywheels and transportationSuperconductor Science and Technology, 2011
- Persistent current in coils made out of second generation high temperature superconductor wire.Applied Physics Letters, 2008
- Development of a superconducting magnet for nuclear magnetic resonance using bulk high‐temperature superconducting materialsConcepts in Magnetic Resonance Part B, 2007
- Design and fabrication of permanent mode magnet by using coated conductorPhysica C: Superconductivity and its Applications, 2006
- Development of a synchronous motor with Gd–Ba–Cu–O bulk superconductors as pole-field magnets for propulsion systemSuperconductor Science and Technology, 2006