HLHengpei Liao

Hengpei Liao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hengpei Liao has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    AC loss measurements of parallel-stacked ReBCO coils cooled by a helium gas circulation system

    by Calvin C T Chow, Ercan Ertekin, Alexander Shchukin, Casper Leonard Klop, Hengpei Liao, Zhishu Qiu, Oriol Fernández-Serracanta, K T Chau, Weijia Yuan, Min Zhang

    Transport AC loss measurement results are presented in this paper for a double pancake superconducting coil wound from two parallel ReBCO tapes stacked together and cooled by gaseous helium, between 35 K–45 K. The power dissipation is obtained using an electrical method that involves adjusting a compensation coil to cancel out the inductive component of the voltage measured across the superconducting coil; the current through the coil is measured by a resistive shunt. Three data processing techniques from the literature to calculate the average power dissipation are compared: the first method multiplies the rms values of the compensated voltage and current waveforms (when the waveforms are in phase), the second method further multiplies the rms values with the cosine of the phase difference between the compensated voltage and current, and the third method integrates the waveform which is the product of the compensated voltage and current waveforms (followed by division by the time period). It is found that the second and third methods give power dissipation that is unchanged over a wider range of compensation, thus the compensation coil can be adjusted less precisely compared to the first method, reducing the time needed for manual adjustment during the measurement process.


  • The Radial Flux HTS Synchronous Motor Stator Windings Comparison for Electrified Aircraft Applications

    by Zhishu Qiu, Aleksandr Shchukin, Muhammad Bin Younas, Hengpei Liao, Weijia Yuan, Min Zhang

    Electrified aircraft propulsion systems could be a key solution for achieving zero-emission aviation. The need for efficient multi-megawatt motors with high power density makes superconducting motors a promising solution. This study investigates the performance of radial flux high-temperature superconductor (HTS) synchronous motors for electrified aircraft applications, emphasizing the impact of stator windings on power density and losses. In this study, two motor benchmarks of 450 kW and 1 MW are proposed, the impact of an iron core on the stator structure is analyzed, and various stator windings including copper/aluminium Litz wires and HTS coils are compared regarding stator AC loss as well as machine power-to-weight ratio (PTW). The result indicates that air-cored stators are preferred due to their lower weight and reduced losses, particularly in cryogenic conditions. Meanwhile, HTS coils outperform Litz wires at lower cryogenic temperatures (40 K) in terms of machine PTW. At 77 K, however, aluminium Litz wires have an advantage over HTS designs for smaller machines. This study concludes that HTS stators with an air-cored structure can be a desired topology for the future high PTW motor design required in low-emission electrified aviation propulsion systems, especially at low cryogenic temperatures achieved with liquid hydrogen ($\text{LH}_{2}$).


  • Open Access

    Magnetization characteristics of HTS-stacked ring magnets with and without HTS stack inserts

    by Hengpei Liao, Anthony R. Dennis, Weijia Yuan, Min Zhang

    High-temperature superconducting (HTS) trapped field magnets can generate and maintain stable, high magnetic fields without requiring external power supplies. Recently, HTS-stacked ring magnets have garnered significant attention due to their flexible geometry, robust mechanical strength, and proven trapped field performance. In this study, we examine the magnetization characteristics of HTS-stacked ring magnets and observed a trapped field higher than the applied field during field cooling magnetization. We also observed that by inserting HTS stacks into the hollow cavity of the HTS-stacked rings, the center field ceased to exhibit an increased center field. Our analysis revealed that the unique induced current distribution and the penetration sequence are the underlying causes. Inspired by the investigation results, we explored deeper into the magnetization properties and identified that a final trapped field higher than the applied field can be achieved through proper design and magnetization of the HTS-stacked ring magnets. However, even though the trapped central field experiences an increase, this does not translate into an increment in the total trapped flux. Instead, a redistribution of the flux is observed. These findings hold significant implications for the design and application of superconducting magnets.


  • Multifilament HTS Cables to Reduce AC Loss: Proof-of-Concept Experiments and Simulation

    by Tian Lan, Hengpei Liao, Muhammad Haseeb Iftikhar, Weijia Yuan, Alexandre Cole, Reda Abdouh, Min Zhang

    Reducing ac losses of high-temperature superconducting (HTS) is essential for ac application since it can lower the constraint on the cryogenic cooling demand. Several studies have reported that the manufacturing of multifilament HTS cables can reduce ac loss. However, large coupling losses were identified in the existing cables, due to the existence of coupled copper or soldering layers. We report in this article a novel way to develop multifilament HTS cables, mainly focusing on suppressing the coupling losses by reducing the contact resistivity within the HTS cables. Heat shrink tubes are used to directly insulate narrow HTS filaments into a cable structure. Sample cables were made with 4 mm and 2 mm wide HTS strips. Both transport losses and total ac losses in a rotational magnetic field were measured to quantify the ac loss reduction for the multifilament HTS cables. The measurements were used to validate the modeling results, and to predict ac loss reduction for 1 mm wide HTS cable. The results showed loss reduction up to around 90% in the 1 mm wide HTS cable compared with 4 mm cable. As a result, the proposed multifilament HTS cables will have promising applications in reducing ac loss.


  • Open Access

    Magnetization mechanism of a hybrid high temperature superconducting trapped field magnet

    by Hengpei Liao, Weijia Yuan, Zhiwei Zhang, Min Zhang

    This paper studies the magnetization mechanism of a hybrid high temperature superconducting (HTS) trapped field magnet. To address the size limitation of traditional HTS bulk materials, hybridization between HTS-stacked ring magnets and HTS bulks is proposed here. A jointless HTS-stacked ring magnet is used to increase the trapped field area for HTS bulks. A hybrid HTS magnet with 90 mm in length and 60 mm in width was tested to provide a trapped field of 7.35 T in a field cooling magnetization. The paper focuses mainly on understanding the novel magnetization mechanism of this hybrid HTS trapped field magnet. A numerical model based on homogenized H formulation was used to compare with experimental results, and a good match was found. Our experimental and numerical study of the electromagnetic interaction between the HTS-stacked ring magnet and the HTS bulks reveals that there are two magnetization stages, and the magnetization speed differs in these two stages by a sing criterion: whether the HTS-stacked ring magnet is fully penetrated or not. This study confirms that hybridization helps to build large HTS trapped field magnets.


  • Experiments and Simulations of the Secondary Suspension System to Improve the Dynamic Characteristics of HTS Maglev

    by Haitao Li, Zigang Deng, Huan Huang, Hengpei Liao, Yuhang Yuan, Weihua Zhang

    High temperature superconducting (HTS) magnetic levitation (maglev) has the potential as a high-speed passenger transportation mode owing to its passive stabilization. Our group is constructing a 1500 m-long HTS maglev high speed test line. As a kind of passenger transport, safety and comfort are primary factors for its operation quality. However, the weak damping in HTS maglev system is not enough to suppress the vibration. As a preliminary study of the test line, this article investigates an additional suspension system aiming to improve the dynamic characteristics of HTS maglev through experiments and simulation. We first built an HTS maglev model vehicle composed of a levitation frame and a car body. The dynamic responses were tested based on a dynamic measurement system. Second, a dynamic model of this kind of maglev device was established and the influence of suspension parameters on its vibration performance is analyzed theoretically. Third, this suspension system was applied to an HTS maglev engineering prototype through numerical simulations. Experimental and simulation results manifested that the suspension system can effectively reduce the vibration, especially with high frequencies. This article provides a reference for the design of HTS maglev vehicles.


  • Simulation and Experiment Research on the Dynamic Levitation Force of Bulk Superconductors Under a Varying External Magnetic Field

    by Hengpei Liao, Jun Zheng, Huan Huang, Zigang Deng

    In practical high-temperature superconducting (HTS) maglev systems, it was found that the levitation force of the onboard bulk superconductors may attenuate gradually under the inhomogeneous magnetic field. The corresponding phenomenon is that the levitation height will decay in the macroscopic and affects the long-term stability of the maglev vehicle. Thus, it is of great significance to study the dynamic levitation force of bulk superconductors under a varying external magnetic field and lay a foundation for the moderate and high-speed HTS maglev system application. In this paper, first, an experiment related to the dynamic levitation performance of YBCO bulks is carried out with a self-developed HTS maglev dynamic measurement system for the investigation of force attenuation. Then, a corresponding two-dimensional simulation model based on the finite element software of COMSOL Multiphysics 5.3 is built to research the dynamic levitation force of bulk superconductors moving above a nonuniform magnetic field. In the simulation, the electromagnetic properties are calculated using the H-formulation, and the moving mesh is employed to implement the relative movement between the bulk superconductors and permanent magnets. The experiment process is repeated in the simulation model, and the simulation results agree with the experimental results.