Acoustic elasticscattering measurements were conducted in a tank on 6 cm‐radius fiberglass spherical shells filled partially or completely with a low‐shear‐speed epoxy resin. Preliminary measurements were conducted also on the void shell before filling and on a solid sphere of the same material of the filler, in order to estimate the constituent material parameters via acoustic inversion. The objects were measured in the backscatter direction, suspended at midwater, and insonified by a broadband directional transducer. From the inspection of the response of the solid‐filled shell, it was possible to detect and characterize inhomogeneities of the interior (air inter‐layers), the presence of which were later confirmed by CT scan and ultrasound measurements.Elastic wave analysis and modeling tools supported the physical interpretation of the measured responses. A spherical shell partially filled with epoxy resin and water was found to exhibit a strong focusing effect in the backscattering direction, for near‐perpendicular incidence with respect to the planar internal water‐resin interface. Spheres of this kind have the potential of being employed as sonar calibration targets.