ATAlessandra Tesei

Alessandra Tesei

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alessandra Tesei has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Towards Doppler estimation and false alarm rejection for Continuous Active Sonar

    by Jeffrey R. Bates, Doug Grimmett, Gaetano Canepa, Alessandra Tesei

    Linear frequency modulated (LFM) continuous active sonar (CAS) waveforms show promise for use in target tracking given that waveforms can be split into sub-waveforms (sub-bands), thereby increasing the target refresh rate. However, reducing the duration and bandwidth of the sub-band decreases the SNR/SRR, adversely affecting detection. We present a target detection technique in which sub-bands are averaged incoherently while exploiting the range bias error (commonly observed in large duration LFM CAS waveforms with significant Doppler) to significantly improve detection. Sub-band averaging, known to reduce the false alarm rate, also mitigates channel coherence losses while maintaining detectability in CAS. A method for performing incoherent averaging over many possible Doppler shifts and identifying contacts via clustering in the 3-dimensional range-bearing-Doppler parameter space will be described. Finally, the promising results obtained with this technique on data acquired by the 2016 Littoral CAS Multi-National Joint Research Project sea trial will be shown. [This work was funded by NATO Allied Command Transformation Future Solutions Branch under the Autonomous Security Network Programme and the LCAS MN-JRP.]


  • Tank measurements of scattering from a resin-filled fiberglass spherical shell with internal flaws

    by Alessandra Tesei, Piero Guerrini, Mario Zampolli

    This paper presents results of acoustic inversion and structural health monitoring achieved by means of low to midfrequency elastic scattering analysis of simple, curved objects, insonified in a water tank. Acoustic elastic scattering measurements were conducted between 15 and 100kHz on a 60-mm-radius fiberglass spherical shell, filled with a low-shear-speed epoxy resin. Preliminary measurements were conducted also on the void shell before filling, and on a solid sphere of the same material as the filler. These data were used to estimate the constituent material parameters via acoustic inversion. The objects were measured in the backscatter direction, suspended at midwater, and insonified by a broadband directional transducer. From the inspection of the response of the solid-filled shell it was possible to detect and characterize significant inhomogeneities of the interior (air pockets), the presence of which were later confirmed by x-ray CT scan and ultrasound measurements. Elastic wave analysis and a model–data comparison study support the physical interpretation of the measurements.


  • Physics-based signal processing methodologies for separating target echoes into their constituent elastic and geometric components

    by Ivars Kirsteins, Alessandra Tesei

    Echoes from even simple canonical symmetric shapes such as solid elastic spheres are highly complex, consisting of a superposition of specular, elastic, and geometric diffractive components closely spaced in time and frequency. Although measurement of the individual elastic and geometric components is important for analysis of scattering physics and object identification, in practice individual components are often hard to measure because of mutual interference between components. When an object interacts with a boundary, such as the sea floor, additional interfering echoes make the object signature even more complicated to interpret. Motivated by this problem, a frequency-domain technique is developed for separating an echo into its constituent elastic and geometric components, and for isolating specular reflections from a possibly interacting boundary. It is based on modelling the echo components in the frequency domain as amplitude-modulated piecewise-linear chirps, utilizing physically-inspired group delay models and constraints, and then using a modified Costas' residual signal analysis (RSA) algorithm in combination with chirp transform analysis to decompose the echo. The RSA scheme is demonstrated on actual echoes collected in the NURC EVA-06 sea trial from spherical and cylindrical target shapes and is shown to work well with the separated components verified against modelling predictions.

  • Estimates of scattering strength for buried cylindrical targets ensonified by evanescent waves

    by David C. Calvo, Mario Zampolli, Alessandra Tesei

    It is known that low‐frequency subcritical sound waves can significantly scatter from targets buried in a seabed due to the significant penetration depth of the incident evanescent wave. Past computational work on scattering by buried spherical shells has been done, for example, using a T‐matrix Method [R. Lim et al., J. Acoust. Soc. Am. 93, 1762‐1783 (1993)], a Virtual Source Method [I. Lucifredi and H. Schmidt., J. Acoust. Soc. Am. 120, 3566‐3583 (2006)], or finite‐element methods [Zampolli et al., J. Acoust. Soc. Am., in press]. In addition to high‐fidelity results which are expected from the preceding numerical methods, it desirable to have approximate analytical/asymptotic predictions of multistatic scattering strength for a variety of homogeneous or layered buried targets. Focusing on buried cylinders of infinite or finite‐length, we first compute scattering using an approximate method that makes use of separation of variables and neglects multiple scattering between the interface and the target. Results are compared with those generated using the Axiscat/NURC/COMSOL finite‐element method. Asymptotic estimates are then presented for scattering strength for objects completely buried in the seafloor for a flat interface (Work sponsored by ONR and NURC.)

  • Elastic scattering by partially-solid-filled spherical shell on the seabed: Model-data comparison and physical understanding

    by Alessandra Tesei, Mario Zampolli, Gaetano Canepa

    Low‐ to mid‐frequency elasticscattering measurements were conducted in the range from 5 to 40 ka on a spherical composite shell deployed proud on a sandy seabed. The object consists of a thin‐walled shell made of layers of a random‐fiber material, and then filled partially with an isotropic solidified epoxy resin and partially with sea water. A scaled version of the object was measured in a water tank under free field conditions. The target responses obtained with and without interaction with the seafloor boundary were compared to simulations achieved by the NURC modeling tool Axiscat. The temporal echoes of the objects were analyzed in terms of elastic waves supported by the structure, on the basis of a ray model. The strongest elastic components come from the interior solid filler. The experimental data of the sphere on the seabed were acquired in October 2006 during the EVA'06 trial off the Island of Elba. The free field data were collected in the NURC water tank.

  • Experiments and numerical modeling of low to midfrequency scattering from elastic objects near the sea floor

    by Mario Zampolli, Alessandra Tesei, Finn B. Jensen, Gaetano Canepa

    The scattering of low to mid‐frequency sound (1‐10's of kHz) from submerged elastic structures of size O(1m) is a topic of interest to the underwater acoustics community. In the first part of the presentation, a brief description of the relevant components of the EVA experiment is given. The purpose of the sea trial was the acquisition of high‐fidelity echoes from submerged spherical and cylindrical targets, made of composite materials with internal layered structure. The second part of the presentation is focused on the finite‐element modeling technique developed at NURC for investigating the scattering from axially symmetric submerged elastic objects. Particular attention is dedicated to the computation of the far field at a distance from the target via the Helmholtz‐Kirchhoff integral, using the near field sampled on the target surface, together with Green's functions capable of describing a two‐layered water‐sediment fluid medium. Those geometries, for which the overall axial symmetry is broken by the presence of the water‐sediment boundary, can be treated approximately by taking into account the boundary‐reflected incident field, as well as the first order interaction between the target‐scattered echo and the sea floor. The numerical technique is validated by comparison with data collected during the EVA trial.

  • Broadband elastic scattering by fiberglass spherical shells and plates measured in a water tank: Acoustic inversion and wave analysis

    by Alessandra Tesei, Paul D. Fox, Gary B. Robb

    Spherical shells and plane plates made of different types of fiberglass (either random or textured) were measured in the backscatter direction, suspended in a water tank in a broadband frequency range between 30 and 350 kHz. The range of ka for the spheres was approximately 8 to 90, with the fd range for the plates approximately 0.15 to 1.75 MHz*m. The aim of the study was to investigate the effects of the fiber type on the object signature, as the frequency and the type of fiber layers vary. Inversion of the material parameters was conducted on the basis of the object's temporal echo. In particular, the estimate of material loss is crucial to determine at what frequency elasticity becomes irrelevant to the object's global response. The spherical shells were measured either void or filled with different materials (liquid and solid) in order to evaluate the contribution of the shell‐borne elastic waves with respect to sound scattered from the interior of the object. Elastic wave analysis and analytical modeling tools were used to support the physical interpretation of the measured responses from the different objects.

  • Benchmark solutions for low-frequency structural acoustic target scattering

    by Mario Zampolli, Alessandra Tesei, Finn B. Jensen

    Low‐frequency scattering problems, typically in the range up to 10 s of kHz for O(1 m) size targets, can be solved by a variety of numerical techniques, each of which has different tradeoffs. In September of 2006, a Target Strength Modeling Workshop was held at NURC with the purpose of establishing a set of benchmark solutions for problems of significance to the underwater structural acousticsmodeling community. Problems for low‐frequency scattering from spherical and cylindrical objects located in the water column or proud or buried in the seabed are presented. Solution techniques ranging from fully 3‐D finite‐element/boundary integral techniques, to Fourier decomposition axisymmetric finite‐element techniques and semi‐analytical methods have been applied to the problem set. The reported solutions show benchmark quality agreement in most cases, and hence could be used as reference solutions for testing low‐frequency structural acousticmodeling tools in the future. The results and techniques presented reach beyond the realm of underwater acoustics, and should be of interest to researchers working in the broader field of structural acoustics.


  • Tank measurements and modeling of elastic scattering by resin-filled fiberglass spherical shells

    by Alessandra Tesei, Mario Zampolli, Piero Guerrini

    Acoustic elasticscattering measurements were conducted in a tank on 6 cm‐radius fiberglass spherical shells filled partially or completely with a low‐shear‐speed epoxy resin. Preliminary measurements were conducted also on the void shell before filling and on a solid sphere of the same material of the filler, in order to estimate the constituent material parameters via acoustic inversion. The objects were measured in the backscatter direction, suspended at midwater, and insonified by a broadband directional transducer. From the inspection of the response of the solid‐filled shell, it was possible to detect and characterize inhomogeneities of the interior (air inter‐layers), the presence of which were later confirmed by CT scan and ultrasound measurements.Elastic wave analysis and modeling tools supported the physical interpretation of the measured responses. A spherical shell partially filled with epoxy resin and water was found to exhibit a strong focusing effect in the backscattering direction, for near‐perpendicular incidence with respect to the planar internal water‐resin interface. Spheres of this kind have the potential of being employed as sonar calibration targets.