Characterization of HTS Insulated Coil for High Field Insert up to 19 T
- 1 December 2017
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (3) , 1-5
Abstract
High Temperature Superconductors (HTS) are a strong candidate for high field magnets. As their properties are extraordinary especially under high fields and very low temperatures, there are many ongoing projects around the world. The NOUGAT project aims at building a 10 T insert operating inside a 20 T resistive background. Its objectives are not to reach higher field than the already existing resistive magnets but rather to overcome the main issues of using HTS above 20 T and pave the way toward full superconductive magnets at lower cost. REBCO coated conductor tape was preferred for the NOUGAT insert even if its implementation is still challenging. Both insulated and metal insulated (MI) coils have been considered for the NOUGAT project. Due to their self-protection behavior, MI windings have been selected for building the insert but we are still investigating insulated coils for future applications. We built a fully-instrumented insulated single pancake wound with a 6-mm wide tape. Voltage taps are set up on each turn to monitor the quench propagation in vapor helium up to 60 K under high magnetic field up to 19 T. This study aims at developing our understanding of the windings quench behavior and testing various quench detection procedures for future large scale insulated applications.Keywords
This publication has 16 references indexed in Scilit:
- 10 T generation by an epoxy impregnated GdBCO insert coil for the 25 T-cryogen-free superconducting magnetSuperconductor Science and Technology, 2016
- 26 T 35 mm all-GdBa2Cu3O7–xmulti-width no-insulation superconducting magnetSuperconductor Science and Technology, 2016
- REBCO Performance at High Field With Low Incident Angle and Preliminary Tests for a 10-T InsertIEEE Transactions on Applied Superconductivity, 2016
- Design Study of a 10-T REBCO Insert SolenoidIEEE Transactions on Applied Superconductivity, 2016
- Progress in the Development and Construction of a 32-T Superconducting MagnetIEEE Transactions on Applied Superconductivity, 2016
- The effects of co-wound Kapton, stainless steel and copper, in comparison with no insulation, on the time constant and stability of GdBCO pancake coilsSuperconductor Science and Technology, 2014
- Transport Characteristics of a Bi-2223 Solenoid Coil in High Magnetic FieldsIEEE Transactions on Applied Superconductivity, 2013
- The study on improving the self-protection ability of HTS coils by removing the insulation and lamination of the various metal tapesPhysica C: Superconductivity and its Applications, 2013
- HTS Coil Test Facility in a Large Bore 20 T Resistive Magnet at LNCMIIEEE Transactions on Applied Superconductivity, 2013
- Generalized critical-state model for hard superconductorsPhysical Review B, 1990