Optimization of Shear Resistance in Precast Concrete Sandwich Wall Panels Using an S-Type Shear Connector
Open Access
Abstract
Precast concrete sandwich wall panels (PCSPs) are popular for building exteriors due to their high thermal efficiency, composite performance, and low manufacturing and maintenance costs. Researchers have investigated the possibility of reducing the panel thickness while maintaining the cladding components’ thermal efficiency and strength to further improve efficiency and to reduce material consumption. However, limited research has been conducted on the shear bonding of steel plates, which is critical to ensuring durability and energy efficiency. This study investigated the shear behaviour of PCSPs with an S-type shear connector (SSC) through nine push-off tests and non-linear finite element modelling using Abaqus. Parametric studies were carried out to investigate the influence of the geometric properties of the SSC, the yield strength of the steel and the insulation thickness. The results suggest that the maximum secant stiffness for SSCs was achieved at a width of 101.4 mm and a thickness of 2 mm. Therefore, it is recommended that the width of the SSCs be limited to this value or less. Furthermore, the study found that increasing the yield strength of the steel beyond a thickness of 2 mm and a width of 101.4 mm did not improve the results and had a negative impact on the secant stiffness of the SSCs.Keywords
Funding Information
- Fundamental Research Grant Scheme (FRGS/1/2020/TK01/UM/02/2)
This publication has 29 references indexed in Scilit:
- Experimental studies on through-thickness shear behavior of EPS based precast concrete sandwich panels with truss shear connectorsComposites Part B: Engineering, 2019
- Nonlinear finite element analysis of composite precast concrete sandwich panels made with diagonal FRP bar connectorsComposite Structures, 2019
- Composite Behavior of Sandwich Panels with W-Shaped SGFRP ConnectorsKSCE Journal of Civil Engineering, 2017
- An indirect non-linear approach for the analysis of sandwich panels with TRC facingsConstruction and Building Materials, 2016
- Recent durability studies on concrete structureCement and Concrete Research, 2015
- Durability and long term behavior of FRP/foam shear transfer mechanism for concrete sandwich panelsConstruction and Building Materials, 2015
- Thermo-mechanical loading of GFRP reinforced thin concrete panelsComposites Part B: Engineering, 2015
- Design optimization of foam-reinforced corrugated sandwich beamsComposite Structures, 2015
- Response of pre-cast reinforced composite sandwich panels to axial loadingConstruction and Building Materials, 2007
- Structural behaviour of eccentrically loaded precast sandwich panelsConstruction and Building Materials, 2006