Compression After Multi‐Angle Low‐Velocity Impact Damage Mechanisms of Concave 3D Angle‐Interlock Woven Composite
- 10 September 2026
- journal article
- Published by Wiley in Polymer Composites
- Vol. 47 (20) , 18851-18869
Abstract
In this study, by varying the proportions of four sets of yarns (binder, weft, warp insertion and weft insertion), four concave 3D angle‐interlock woven composites (3DAWCs), named S1(1:1:0:0), S2 (0.5:1:0.5:0), S3 (1:0.5:0:0.5), S4 (0.5:0.5:0.5:0.5), were designed and fabricated. Compression after multi‐angle (90°, 75°, and 60°) impact (CAI) tests on four concave 3DAWCs were conducted. The surface crack propagation and the internal yarn failure patterns were characterized by using 3D profilometer and CT scanning. A concave 3DAWC CAI model at microscale was established for finite element (FE) analysis. The results indicated that the ultimate strength and compressive stiffness of the four 3DAWCs increased as the impact angle decreased. The analysis of surface compression damage shown that the greater the impact angle, the more prone 3DWACs were to crack propagation. The study further revealed that the incorporation of weft insertions into the reinforcement of 3DAWCs were highly effective in enhancing CAI strength. And introducing warp insertions in 3DAWCs could reduce crack propagation. The results of the FE calculation and the CT characterization are highly consistent, which verifies the reliability of the model. The simulation results shown that a reduction in the impact angle leads to an increase in the stress transfer efficiency of the yarn during compression, and the significant deformation of the weft is the main cause of crack propagation.Keywords
Funding Information
- National Science and Technology Major Project (2017‐VII‐0011‐0177)
This publication has 38 references indexed in Scilit:
- Finite Element Analysis of a Concave 3D Angle‐Interlock Woven Composites Under 60° and 90° Low‐Velocity ImpactPolymer Composites, 2025
- Multi‐Angle Low‐Velocity Impact Response of Concave 3D Angle‐Interlock Woven CompositesPolymer Composites, 2025
- The failure mechanism of curved composite laminates subjected to low-velocity impactActa Mechanica Sinica, 2023
- Bending property of novel 3D woven variable thickness composites: Experiment and finite element analysisPolymer Composites, 2023
- Structure Effect on Damage Evolution of 3-D Angle-interlock Woven Composites Under Low-velocity Impact By Coupled DIC Analysis and Numerical StudyApplied Composite Materials, 2022
- Mechanical Response of CFRP Laminates Subjected to Low-Velocity Oblique ImpactApplied Composite Materials, 2022
- Low‐velocity impact resistance and acoustic emission evaluation on mechanical failure of carbon fiber weft‐knitting‐reinforced compositesPolymers for Advanced Technologies, 2021
- Compressive Behavior of 3D Woven Composite Stiffened Panels: Experimental and Numerical StudyApplied Composite Materials, 2016
- Dynamic response and damage analysis of fiber-reinforced composite laminated plates under low-velocity oblique impactNonlinear Dynamics, 2016
- Oblique Low-Velocity Impact on Fiber-Metal LaminatesApplied Composite Materials, 2016