Yifan Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yifan Zhang has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
Li Chen
School of Textile Science and Engineering Tiangong University Tianjin China
14 shared publicationsQiwei Guo
12 shared publicationsDaijun Zhang
7 shared publicationsChao Li
6 shared publicationsJunhua Guo
6 shared publicationsDiansen Li
5 shared publications
Latest Publications
- 15 November 2026
- Published by Wiley in Polymer Composites
Stochastic Mesoscale Modelling of Temperature‐Dependent Fatigue Damage in 2.5D Shallow Straight‐Link Woven Composites
Fatigue durability in three‐dimensional woven polymer composites depends on both mesoscopic textile variability and temperature‐sensitive constituent degradation, yet these effects are commonly treated separately. This study develops a stochastic mesoscale framework for the warp‐direction fatigue of 2.5D shallow straight‐link carbon‐fiber/bismaleimide composites. Four random representative volume unit cells (RRVUCs) capture variations in the cross‐sectional dimensions, positional offsets, and deflection angles of the weft and weft‐reinforced yarns. Each cell is coupled to a temperature‐dependent progressive fatigue damage model and assessed against tensile fatigue tests at 20°C and 180°C. Most predicted lives fall within a factor‐of‐three range of the measurements. At comparable normalized stress levels, the average fatigue life at 20°C is more than 20% longer than that at 180°C, while residual‐stiffness degradation changes from a two‐stage to a three‐stage process. Simulations and fracture observations identify longitudinal warp‐yarn fracture as the final failure mode at both temperatures. Elevated temperature causes earlier matrix damage and more extensive transverse damage in the weft and weft‐reinforced yarns, thereby modifying local load transfer and damage propagation. The framework links processing‐induced geometric variability to temperature‐dependent fatigue degradation under the investigated loading conditions.
- 15 November 2026
- Published by Wiley in Polymer Composites
Stochastic Mesoscale Modelling of Temperature‐Dependent Fatigue Damage in 2.5D Shallow Straight‐Link Woven Composites
Fatigue durability in three‐dimensional woven polymer composites depends on both mesoscopic textile variability and temperature‐sensitive constituent degradation, yet these effects are commonly treated separately. This study develops a stochastic mesoscale framework for the warp‐direction fatigue of 2.5D shallow straight‐link carbon‐fiber/bismaleimide composites. Four random representative volume unit cells (RRVUCs) capture variations in the cross‐sectional dimensions, positional offsets, and deflection angles of the weft and weft‐reinforced yarns. Each cell is coupled to a temperature‐dependent progressive fatigue damage model and assessed against tensile fatigue tests at 20°C and 180°C. Most predicted lives fall within a factor‐of‐three range of the measurements. At comparable normalized stress levels, the average fatigue life at 20°C is more than 20% longer than that at 180°C, while residual‐stiffness degradation changes from a two‐stage to a three‐stage process. Simulations and fracture observations identify longitudinal warp‐yarn fracture as the final failure mode at both temperatures. Elevated temperature causes earlier matrix damage and more extensive transverse damage in the weft and weft‐reinforced yarns, thereby modifying local load transfer and damage propagation. The framework links processing‐induced geometric variability to temperature‐dependent fatigue degradation under the investigated loading conditions.
- 10 September 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (20) , 18851-18869
Compression After Multi‐Angle Low‐Velocity Impact Damage Mechanisms of Concave 3D Angle‐Interlock Woven Composite
In this study, by varying the proportions of four sets of yarns (binder, weft, warp insertion and weft insertion), four concave 3D angle‐interlock woven composites (3DAWCs), named S1(1:1:0:0), S2 (0.5:1:0.5:0), S3 (1:0.5:0:0.5), S4 (0.5:0.5:0.5:0.5), were designed and fabricated. Compression after multi‐angle (90°, 75°, and 60°) impact (CAI) tests on four concave 3DAWCs were conducted. The surface crack propagation and the internal yarn failure patterns were characterized by using 3D profilometer and CT scanning. A concave 3DAWC CAI model at microscale was established for finite element (FE) analysis. The results indicated that the ultimate strength and compressive stiffness of the four 3DAWCs increased as the impact angle decreased. The analysis of surface compression damage shown that the greater the impact angle, the more prone 3DWACs were to crack propagation. The study further revealed that the incorporation of weft insertions into the reinforcement of 3DAWCs were highly effective in enhancing CAI strength. And introducing warp insertions in 3DAWCs could reduce crack propagation. The results of the FE calculation and the CT characterization are highly consistent, which verifies the reliability of the model. The simulation results shown that a reduction in the impact angle leads to an increase in the stress transfer efficiency of the yarn during compression, and the significant deformation of the weft is the main cause of crack propagation.
- 10 September 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (20) , 18851-18869
Compression After Multi‐Angle Low‐Velocity Impact Damage Mechanisms of Concave 3D Angle‐Interlock Woven Composite
In this study, by varying the proportions of four sets of yarns (binder, weft, warp insertion and weft insertion), four concave 3D angle‐interlock woven composites (3DAWCs), named S1(1:1:0:0), S2 (0.5:1:0.5:0), S3 (1:0.5:0:0.5), S4 (0.5:0.5:0.5:0.5), were designed and fabricated. Compression after multi‐angle (90°, 75°, and 60°) impact (CAI) tests on four concave 3DAWCs were conducted. The surface crack propagation and the internal yarn failure patterns were characterized by using 3D profilometer and CT scanning. A concave 3DAWC CAI model at microscale was established for finite element (FE) analysis. The results indicated that the ultimate strength and compressive stiffness of the four 3DAWCs increased as the impact angle decreased. The analysis of surface compression damage shown that the greater the impact angle, the more prone 3DWACs were to crack propagation. The study further revealed that the incorporation of weft insertions into the reinforcement of 3DAWCs were highly effective in enhancing CAI strength. And introducing warp insertions in 3DAWCs could reduce crack propagation. The results of the FE calculation and the CT characterization are highly consistent, which verifies the reliability of the model. The simulation results shown that a reduction in the impact angle leads to an increase in the stress transfer efficiency of the yarn during compression, and the significant deformation of the weft is the main cause of crack propagation.
- 30 July 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (20) , 18306-18328
Effect of Hole‐Shape on Tension‐Tension Fatigue Life and Damage Mechanisms of Open‐Hole 3D Woven Composites
Open‐hole three‐dimensional woven composites (3DWC) are increasingly used in cyclically loaded structures, yet the role of hole‐boundary geometry in their fatigue damage evolution remains insufficiently understood. This study combines tension–tension fatigue experiments with mesoscopic progressive damage simulations to examine seven central‐hole geometries with a characteristic size of 6 mm. Circular, square, and rhombic holes were investigated experimentally, and the model evaluated against these tests was subsequently applied to waist‐shaped, slit, hexagonal, and octagonal holes as numerical parametric cases. For the experimentally tested configurations, the predicted fatigue lives reasonably reproduced the measured life ranges, with most results falling within a twofold error band; the predicted damage‐localization regions were also qualitatively consistent with the observed final fracture morphologies. The numerical analyses further indicate that transverse yarn damage constitutes the dominant damage mode and that boundary continuity, corner distribution, and corner orientation relative to the yarn system jointly control stress redistribution and fatigue damage paths. Smooth‐boundary holes promote dispersed damage accumulation and slower stiffness degradation, corner‐symmetric holes guide damage along preferred directions, and corner‐dispersed holes induce multisite localized damage. These findings link hole‐boundary features to fatigue failure mechanisms in open‐hole 3DWC and provide a basis for designing noncircular cut‐outs.
- 30 July 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (20) , 18306-18328
Effect of Hole‐Shape on Tension‐Tension Fatigue Life and Damage Mechanisms of Open‐Hole 3D Woven Composites
Open‐hole three‐dimensional woven composites (3DWC) are increasingly used in cyclically loaded structures, yet the role of hole‐boundary geometry in their fatigue damage evolution remains insufficiently understood. This study combines tension–tension fatigue experiments with mesoscopic progressive damage simulations to examine seven central‐hole geometries with a characteristic size of 6 mm. Circular, square, and rhombic holes were investigated experimentally, and the model evaluated against these tests was subsequently applied to waist‐shaped, slit, hexagonal, and octagonal holes as numerical parametric cases. For the experimentally tested configurations, the predicted fatigue lives reasonably reproduced the measured life ranges, with most results falling within a twofold error band; the predicted damage‐localization regions were also qualitatively consistent with the observed final fracture morphologies. The numerical analyses further indicate that transverse yarn damage constitutes the dominant damage mode and that boundary continuity, corner distribution, and corner orientation relative to the yarn system jointly control stress redistribution and fatigue damage paths. Smooth‐boundary holes promote dispersed damage accumulation and slower stiffness degradation, corner‐symmetric holes guide damage along preferred directions, and corner‐dispersed holes induce multisite localized damage. These findings link hole‐boundary features to fatigue failure mechanisms in open‐hole 3DWC and provide a basis for designing noncircular cut‐outs.
- 26 July 2026
- Published by Springer Nature
- p. 207-215
A Spectral Clustering Method for Dividing Power Grid Regions Considering Inertia Distribution
- 26 July 2026
- Published by Springer Nature
- p. 207-215
A Spectral Clustering Method for Dividing Power Grid Regions Considering Inertia Distribution
- 24 January 2026
- Published by Elsevier in Composite Structures
- Vol. 382
Vibration fatigue behavior and failure mechanism of 3D layer-to-layer interlock woven composites
- 24 January 2026
- Published by Elsevier in Composite Structures
- Vol. 382
Vibration fatigue behavior and failure mechanism of 3D layer-to-layer interlock woven composites
- 31 December 2025
- Published by Wiley in Polymer Composites
- Vol. 47 (10) , 9551-9567
Finite Element Analysis of a Concave 3D Angle‐Interlock Woven Composites Under 60° and 90° Low‐Velocity Impact
This paper constructed for the first time a finite element model of concave 3D angle‐interlock woven composites (3DAWCs) at the yarn scale, which can accurately simulate the stress, strain, and damage evolution of curved composites under the low‐velocity impact (LVI) at 60° and 90° impact angles. A viscoplastic user‐mater (VUMAT) subroutine was coded based on the 3D Hashin failure criterion and linear damage evolution, filling the gap of traditional models in oblique impact simulation. To verify the reliability of the numerical analysis, a LVI test was conducted by a self‐developed multi‐angle impact device. The damage morphology was characterized by 3D profilometer and CT scanning. Validation of the load, displacement, and energy between experiments and computation is performed, and the finite element analysis is conducted based on the observed mechanical properties and their reliability. Both the experimental and finite element results showed that the oblique impact causes severe damage to the surface binder yarns, while the normal impact results in uniform force on each layer of yarns, resulting in a smaller damage effect.
- 31 December 2025
- Published by Wiley in Polymer Composites
- Vol. 47 (10) , 9551-9567
Finite Element Analysis of a Concave 3D Angle‐Interlock Woven Composites Under 60° and 90° Low‐Velocity Impact
This paper constructed for the first time a finite element model of concave 3D angle‐interlock woven composites (3DAWCs) at the yarn scale, which can accurately simulate the stress, strain, and damage evolution of curved composites under the low‐velocity impact (LVI) at 60° and 90° impact angles. A viscoplastic user‐mater (VUMAT) subroutine was coded based on the 3D Hashin failure criterion and linear damage evolution, filling the gap of traditional models in oblique impact simulation. To verify the reliability of the numerical analysis, a LVI test was conducted by a self‐developed multi‐angle impact device. The damage morphology was characterized by 3D profilometer and CT scanning. Validation of the load, displacement, and energy between experiments and computation is performed, and the finite element analysis is conducted based on the observed mechanical properties and their reliability. Both the experimental and finite element results showed that the oblique impact causes severe damage to the surface binder yarns, while the normal impact results in uniform force on each layer of yarns, resulting in a smaller damage effect.
- 24 November 2025
- Published by Wiley in Polymer Composites
- Vol. 47 (8) , 7477-7493
Multiscale Tensile Failure Mechanisms in Multiaxial 3D Woven Composite Joints: Experimental and Numerical Insights
The growing utilization of three‐dimensional (3D) woven composites in aerospace applications has heightened the importance of understanding their pin connection behavior for structural design. This study investigates the mechanical performance of pin joints fabricated from two multidirectional three‐dimensional angle‐interlock woven composites (M3DAWC) and a conventional three‐dimensional angle‐interlock woven composite (3DAWC). Tensile testing coupled with post‐fracture computed tomography (CT) scanning was performed to characterize the failure mechanisms of each joint configuration. A multiscale finite element model (FEM), incorporating both macroscopic and mesoscopic features, was developed to simulate the progressive damage behavior under loading. Experimental and numerical results demonstrate that incorporating bias yarns into 3DAWC significantly reduces stress concentrations around the hole region, leading to simultaneous improvements in both tensile strength and failure displacement.
- 24 November 2025
- Published by Wiley in Polymer Composites
- Vol. 47 (8) , 7477-7493
Multiscale Tensile Failure Mechanisms in Multiaxial 3D Woven Composite Joints: Experimental and Numerical Insights
The growing utilization of three‐dimensional (3D) woven composites in aerospace applications has heightened the importance of understanding their pin connection behavior for structural design. This study investigates the mechanical performance of pin joints fabricated from two multidirectional three‐dimensional angle‐interlock woven composites (M3DAWC) and a conventional three‐dimensional angle‐interlock woven composite (3DAWC). Tensile testing coupled with post‐fracture computed tomography (CT) scanning was performed to characterize the failure mechanisms of each joint configuration. A multiscale finite element model (FEM), incorporating both macroscopic and mesoscopic features, was developed to simulate the progressive damage behavior under loading. Experimental and numerical results demonstrate that incorporating bias yarns into 3DAWC significantly reduces stress concentrations around the hole region, leading to simultaneous improvements in both tensile strength and failure displacement.
- 19 September 2025
- Published by Springer Nature in Applied Composite Materials
- Vol. 32 (6) , 2911-2924
Tensile Properties and Failure Mechanisms of Quartz Fiber Needled and Stitched Preforms and Composites
- 19 September 2025
- Published by Springer Nature in Applied Composite Materials
- Vol. 32 (6) , 2911-2924
Tensile Properties and Failure Mechanisms of Quartz Fiber Needled and Stitched Preforms and Composites
- 19 August 2025
- Published by Wiley in Polymer Composites
- Vol. 47 (3) , 2469-2485
Weft Tensile Mechanical Behavior of 2.5D Woven Composite Notched Structures: Modification of Whitney–Nuismer Criterion, Simulation, and Experiment
2.5D woven composites (2.5DWC) are regarded as one of the most promising materials for future aerospace applications, but with the inevitable need for drilling holes during service, quickly predicting their strength has become a challenge for engineering design. In this work, we focus on the degree to which the yarn at the hole edge is cut. The Whitney–Nuismer (W‐N) criterion, which is only applicable to notched structures of laminated composites, is modified to apply to the rapid prediction of the strength of 2.5DWC notched structures (2.5DWC‐NS) Further, progressive damage simulations and experiments are also performed for 2.5DWC‐NS with different notch sizes and compared with the predicted values of the modified criterion. The results show that the deviation between the strength predicted by the modified criterion and the experimental data is only 15.87%, which is within the acceptable engineering deviation. Additionally, numerical simulations indicate that the stress concentration factor increases and the stiffness and strength decrease as the notch size and the area of the load‐bearing yarns at the hole edge being cut increase. Through numerical simulations, it is found that the stress concentration factor increases, whereas the stiffness and strength decrease as the notch size and the area of the load‐bearing yarns being cut at the hole edge increase. The modified criterion provides a convenient tool for the rapid design of 2.5DWC structures with significant engineering implications.
- 19 August 2025
- Published by Wiley in Polymer Composites
- Vol. 47 (3) , 2469-2485
Weft Tensile Mechanical Behavior of 2.5D Woven Composite Notched Structures: Modification of Whitney–Nuismer Criterion, Simulation, and Experiment
2.5D woven composites (2.5DWC) are regarded as one of the most promising materials for future aerospace applications, but with the inevitable need for drilling holes during service, quickly predicting their strength has become a challenge for engineering design. In this work, we focus on the degree to which the yarn at the hole edge is cut. The Whitney–Nuismer (W‐N) criterion, which is only applicable to notched structures of laminated composites, is modified to apply to the rapid prediction of the strength of 2.5DWC notched structures (2.5DWC‐NS) Further, progressive damage simulations and experiments are also performed for 2.5DWC‐NS with different notch sizes and compared with the predicted values of the modified criterion. The results show that the deviation between the strength predicted by the modified criterion and the experimental data is only 15.87%, which is within the acceptable engineering deviation. Additionally, numerical simulations indicate that the stress concentration factor increases and the stiffness and strength decrease as the notch size and the area of the load‐bearing yarns at the hole edge being cut increase. Through numerical simulations, it is found that the stress concentration factor increases, whereas the stiffness and strength decrease as the notch size and the area of the load‐bearing yarns being cut at the hole edge increase. The modified criterion provides a convenient tool for the rapid design of 2.5DWC structures with significant engineering implications.