Preparation and characterization of poly(styrene‐b‐butadiene‐b‐styrene)/montmorillonite nanocomposites
Authors:
- 20 June 2008
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 30 (3) , 281-287
Abstract
With some polymerizable small molecules grafting onto the montmorillonite surface, we disposed the clay through in‐situ emulsion polymerization, and the structure of the modified montmorillonites were studied through Fourier transform infrared spectroscopy (FTIR) and X‐ray diffraction (XRD). The nanocomposites of poly(styrene‐b‐butadiene‐b‐styrene) (SBS)/montmorillonite with excellent mechanical properties were prepared by mixing SBS and the modified montmorillonite on the double rollers at 150°C. The exfoliation of the layered silicates was confirmed by XRD analysis and transmission electron microscopy (TEM) observation. After mechanical kneading of the molten nanocomposites, the exfoliation structure of the silicates is still stable for polystyrene macromolecules grafting onto the silicates. Upon the addition of the modified montmorillonite, the tensile strength, elongation at break and tear strength of the nanocomposites increased from 22.6 MPa to 31.1 MPa, from 608% to 948%, from 45.32 N/mm to 55.27 N/mm, respectively. The low‐temperature point of glass‐transition temperature (Tg) of the products was about −77°C, almost constant, but the high‐temperature point increased from 97°C to 106°C. In addition, the nanocomposites of SBS and modified montmorillonites showed good resistance to thermal oxidation and aging. POLYM. COMPOS., 2009. © 2008 Society of Plastics EngineersKeywords
This publication has 14 references indexed in Scilit:
- Polymer Nanocomposites with Prescribed Morphology: Going beyond Nanoparticle-Filled PolymersChemistry of Materials, 2007
- Exfoliated Block Copolymer/Silicate Nanocomposites by One-Pot, One-Step in-Situ Living Polymerization from Silicate-Anchored Multifunctional InitiatorMacromolecules, 2006
- Poly(ethylene-co-vinyl acetate)/clay nanocomposites: Effect of clay nature and organic modifiers on morphology, mechanical and thermal propertiesPolymer Degradation and Stability, 2005
- Studies on the poly(styrene-b-butadiene-b-styrene)/clay nanocomposites prepared by melt intercalationJournal of Applied Polymer Science, 2005
- Polyethylene-layered silicate nanocomposites prepared by the polymerization-filling technique: synthesis and mechanical propertiesPolymer, 2002
- Synthesis of polystyrene-clay nanocomposites via emulsion polymerization using a reactive surfactantPolymer Bulletin, 2002
- A hierarchical structure and properties of intercalated polypropylene/clay nanocompositesPolymer, 2001
- Polymer layered silicate nanocompositesMacromolecular Materials and Engineering, 2000
- Polymer-layered silicate nanocomposites: an overviewApplied Clay Science, 1999
- Studies on nylon 6/clay nanocomposites by melt-intercalation processJournal of Applied Polymer Science, 1999