Zhonghua Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhonghua Chen has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Chunming Chen
Department of Chemistry, Hanshan Normal University, Chaozhou 521041, China
2 shared publications Fei Yu
College of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China
2 shared publicationsXingrong Zeng
College of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China
2 shared publicationsChunming Chen
Institute of Post Doctor, South China University of Technology, Guangzhou, China
1 shared publication- Fei Yu
Key Laboratory of Heat Transfer Enhancement and Energy Conservation of Education Ministry Guangzhou 510640 China
1 shared publication Gui-Jun Zhang
South China University of Technology
1 shared publication
Latest Publications
- Open Access
Newly Synthesized Morpholinyl Mannich Bases as Corrosion Inhibitors for N80 Steel in Acid Environment
New Mannich bases, 3-morpholino-1-phenylpropan-1-one (MPO) and 3-morpholino-1-phenyl-3-(pyridin-4-yl) propan-1-one (MPPO), were synthesized, characterized, and studied as corrosion inhibitors for N80 steel in 1 M hydrochloric acid (HCl) solution using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and FT-IR spectroscopy. The inhibition efficiency increases with increasing inhibitor concentrations, and the corrosion inhibition efficiency of the MPO and MPPO could reach 90.3% and 91.4%, respectively, at a concentration of 300 ppm at 305 K. The effect of the temperature on the corrosion inhibition behavior of inhibitors was discussed. Electrochemical tests showed that the synthesized inhibitors are mixed. The EIS test results showed that the presence of MPO and MPPO reduced the double-layer capacitance in the corrosion process, thereby reducing the charge transfer resistance. The SEM and EDX results showed that the MPO and MPPO formed a uniform adsorption film on the surface of the N80 steel. The adsorption mechanism of the inhibitors was simulated with different adsorption models and the results showed that the inhibitors were the chemisorbed type. The results of the FT-IR spectroscopy proved that the inhibitor interacted with metal atoms on the steel surface.
Open AccessNewly Synthesized Morpholinyl Mannich Bases as Corrosion Inhibitors for N80 Steel in Acid Environment
New Mannich bases, 3-morpholino-1-phenylpropan-1-one (MPO) and 3-morpholino-1-phenyl-3-(pyridin-4-yl) propan-1-one (MPPO), were synthesized, characterized, and studied as corrosion inhibitors for N80 steel in 1 M hydrochloric acid (HCl) solution using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and FT-IR spectroscopy. The inhibition efficiency increases with increasing inhibitor concentrations, and the corrosion inhibition efficiency of the MPO and MPPO could reach 90.3% and 91.4%, respectively, at a concentration of 300 ppm at 305 K. The effect of the temperature on the corrosion inhibition behavior of inhibitors was discussed. Electrochemical tests showed that the synthesized inhibitors are mixed. The EIS test results showed that the presence of MPO and MPPO reduced the double-layer capacitance in the corrosion process, thereby reducing the charge transfer resistance. The SEM and EDX results showed that the MPO and MPPO formed a uniform adsorption film on the surface of the N80 steel. The adsorption mechanism of the inhibitors was simulated with different adsorption models and the results showed that the inhibitors were the chemisorbed type. The results of the FT-IR spectroscopy proved that the inhibitor interacted with metal atoms on the steel surface.
- Open Access
Preparation and Performance Study of Carboxy-Functionalized Graphene Oxide Composite Polyaniline Modified Water-Based Epoxy Zinc-Rich Coatings
Graphene oxide is obtained by oxidation of graphite followed by ultrasonic exfoliation. It is a two-dimensional layered material with a large number of oxygen-containing functional groups on its surface. Polyaniline is a conductive polymer and has a unique corrosion protection mechanism. In this study, carboxy-functionalized graphene oxide/polyaniline (CGO/PANI) composites with a lamellar structure were prepared by in situ polymerization. The lamellar layer was used to form a labyrinthine structure in the coating to effectively retard the penetration of corrosive media. The electrical conductivity of polyaniline can promote the formation of conductive pathways between zinc particles and improve the utilization of zinc powder. Polyaniline is also able to passivate the substrate, further improving the coating’s ability to protect steel substrates against corrosion. In this paper, the in situ polymerization of aniline on carboxy-functionalized graphene oxide flakes was confirmed by scanning electron microscopy (SEM), Fourier infrared spectroscopy (FT-IR), and X-ray diffraction (XRD), and the improvement of the corrosion resistance of the prepared composites on the epoxy zinc-rich coatings was evaluated by SEM, electrochemical impedance spectroscopy (EIS), and salt spray resistance tests. The results showed that aniline was successfully polymerized in situ on carboxy-functionalized graphene oxide, and the modified coating had significantly improved anticorrosive properties, where the best anticorrosive improvement was achieved when CGO: PANI = 0.03.
Open AccessPreparation and Performance Study of Carboxy-Functionalized Graphene Oxide Composite Polyaniline Modified Water-Based Epoxy Zinc-Rich Coatings
Graphene oxide is obtained by oxidation of graphite followed by ultrasonic exfoliation. It is a two-dimensional layered material with a large number of oxygen-containing functional groups on its surface. Polyaniline is a conductive polymer and has a unique corrosion protection mechanism. In this study, carboxy-functionalized graphene oxide/polyaniline (CGO/PANI) composites with a lamellar structure were prepared by in situ polymerization. The lamellar layer was used to form a labyrinthine structure in the coating to effectively retard the penetration of corrosive media. The electrical conductivity of polyaniline can promote the formation of conductive pathways between zinc particles and improve the utilization of zinc powder. Polyaniline is also able to passivate the substrate, further improving the coating’s ability to protect steel substrates against corrosion. In this paper, the in situ polymerization of aniline on carboxy-functionalized graphene oxide flakes was confirmed by scanning electron microscopy (SEM), Fourier infrared spectroscopy (FT-IR), and X-ray diffraction (XRD), and the improvement of the corrosion resistance of the prepared composites on the epoxy zinc-rich coatings was evaluated by SEM, electrochemical impedance spectroscopy (EIS), and salt spray resistance tests. The results showed that aniline was successfully polymerized in situ on carboxy-functionalized graphene oxide, and the modified coating had significantly improved anticorrosive properties, where the best anticorrosive improvement was achieved when CGO: PANI = 0.03.
- Open Access
- 13 April 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (19) , 12160-12165
Novel poly(epichlorohydrin)-based matrix for monolithic ionogel electrolyte membrane with high lithium storage performances
Based on gelling matrices and ionic liquids (ILs), monolithic ionogel electrolyte membranes (MIEMs) have become a research focus. However, further application is limited by lack of functional matrices. Herein, we proposed the introduction of an ionized polymer, i.e., polyether polymer with side-chain ionic groups obtained via the reaction of quaternary ammonium with uncrystallizable poly (epichlorohydrin) (PECH), as the matrix into the gels to balance the mechanical properties and the ionic conductivity. In combination with lithium bis-(fluorosulfonyl) imide (LiFSI) and 1-ethyl-3-methylimidazolium bis-(fluorosulfonyl)-imide (EMImFSI) via a solvent casting technique, a flexible MIEM was successfully prepared. The as-obtained MIEM exhibited good thermal stability (up to about 250 °C) and a high ionic conductivity of 1.21 mS cm−1 at 20 °C. Moreover, Li|LiFePO4 coin cells using this MIEM delivered high capacity (150.0 mA h g−1 at 0.2C) with good cycling stability, and an excellent C-rate response. This work discloses a novel and paramount route to exploit PECH-based MIEMs for Li storage, as well as energy storage systems beyond Li.
- 13 April 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (19) , 12160-12165
Open AccessNovel poly(epichlorohydrin)-based matrix for monolithic ionogel electrolyte membrane with high lithium storage performances
Based on gelling matrices and ionic liquids (ILs), monolithic ionogel electrolyte membranes (MIEMs) have become a research focus. However, further application is limited by lack of functional matrices. Herein, we proposed the introduction of an ionized polymer, i.e., polyether polymer with side-chain ionic groups obtained via the reaction of quaternary ammonium with uncrystallizable poly (epichlorohydrin) (PECH), as the matrix into the gels to balance the mechanical properties and the ionic conductivity. In combination with lithium bis-(fluorosulfonyl) imide (LiFSI) and 1-ethyl-3-methylimidazolium bis-(fluorosulfonyl)-imide (EMImFSI) via a solvent casting technique, a flexible MIEM was successfully prepared. The as-obtained MIEM exhibited good thermal stability (up to about 250 °C) and a high ionic conductivity of 1.21 mS cm−1 at 20 °C. Moreover, Li|LiFePO4 coin cells using this MIEM delivered high capacity (150.0 mA h g−1 at 0.2C) with good cycling stability, and an excellent C-rate response. This work discloses a novel and paramount route to exploit PECH-based MIEMs for Li storage, as well as energy storage systems beyond Li.
- Open Access
Microencapsulation of Photochromic Solution with Polyurea by Interfacial Polymerization
Photochromic materials are interesting materials because of their color-changing property under UV light and visible light irradiation. However, they are vulnerable to many factors, such as pH oxygen, ion, solvent, etc. because of the unsaturated bonds existing on the photochromic molecular. Microencapsulation of the photochromic materials can separate them from the surroundings. Here, photochromic microcapsules using 3,3-Diphenyl-3H-naphtho[2,1-b] pyran (NP)/solution as core and polyurea as shell via interfacial polymerization were prepared, and bis(2,2,6,6-tetramethyl-4-piperidinyl)sebacate (HALS 770) was used as photostabilizer. Fourier transform infrared spectroscopy (FTIR), a laser particle size analyzer, a scanning electron microscope (SEM), a thermogravimetric analyzer and an ultraviolet-visible spectrophotometer were used for characterization. The results showed that the microcapsules had a uniform particle size of about 0.56 μm when the percentage of the oil phase (core) in the emulsion was less than 15%, the addition amount of the emulsifier was 0.4%, and the stirring rate was 1800 r/min. The microcapsules showed better performance in thermal stability when the core/shell ratio was 1:1. The photostabilizer had little impact on the color-changing property of the microcapsule, but it could protect the microcapsules from UV light radiation aging.
Open AccessMicroencapsulation of Photochromic Solution with Polyurea by Interfacial Polymerization
Photochromic materials are interesting materials because of their color-changing property under UV light and visible light irradiation. However, they are vulnerable to many factors, such as pH oxygen, ion, solvent, etc. because of the unsaturated bonds existing on the photochromic molecular. Microencapsulation of the photochromic materials can separate them from the surroundings. Here, photochromic microcapsules using 3,3-Diphenyl-3H-naphtho[2,1-b] pyran (NP)/solution as core and polyurea as shell via interfacial polymerization were prepared, and bis(2,2,6,6-tetramethyl-4-piperidinyl)sebacate (HALS 770) was used as photostabilizer. Fourier transform infrared spectroscopy (FTIR), a laser particle size analyzer, a scanning electron microscope (SEM), a thermogravimetric analyzer and an ultraviolet-visible spectrophotometer were used for characterization. The results showed that the microcapsules had a uniform particle size of about 0.56 μm when the percentage of the oil phase (core) in the emulsion was less than 15%, the addition amount of the emulsifier was 0.4%, and the stirring rate was 1800 r/min. The microcapsules showed better performance in thermal stability when the core/shell ratio was 1:1. The photostabilizer had little impact on the color-changing property of the microcapsule, but it could protect the microcapsules from UV light radiation aging.
- Open Access
- 29 March 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (18) , 10024-10029
Self-assembly of nanoencapsulated undecanoic acid on cotton fiber for thermoregulating textiles
We herein report the preparation of phase change nanocapsules with undecanoic acid (UA) as the core and a styrene–butyl acrylate copolymer as the shell by miniemulsion polymerization using interfacial redox initiation.
- 29 March 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (18) , 10024-10029
Open AccessSelf-assembly of nanoencapsulated undecanoic acid on cotton fiber for thermoregulating textiles
We herein report the preparation of phase change nanocapsules with undecanoic acid (UA) as the core and a styrene–butyl acrylate copolymer as the shell by miniemulsion polymerization using interfacial redox initiation.
- 8 May 2015
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 132 (31)
Poly(methyl methacrylate) copolymer nanocapsules containing phase‐change material (n‐dodecanol) prepared via miniemulsion polymerization
Poly(methyl methacrylate) copolymer nanocapsules containing the phase‐change material n‐dodecanol, which could be used for energy storage, were prepared with different comonomers via miniemulsion polymerization. The thermal properties, morphology, and composition of nanocapsules were characterized with differential scanning calorimetry, thermogravimetric analysis, transmission electron microscopy, and Fourier transform infrared spectroscopy. The results show that the thermal properties and morphology of the nanocapsules were influenced greatly by the type and amount of comonomers. Under the same dosage of 4 wt %, the nanocapsules prepared with the comonomer acrylamine and which had a moderate hydrophilicity showed the highest phase‐change latent heat of 109.3 J/g; the acrylamine that had a moderate hydrophilicity and the highest encapsulation efficiency of 91.3%. The size of the nanocapsules ranged from 50 to 100 nm with a uniform spherical shape and apparent core–shell structure. We also found that when the amount of the soft comonomer butyl acrylate was increased, the phase‐change latent heat of the nanocapsules first decreased slightly, then increased to the maximum value with deformed spherical and conglutinated morphology, and finally decreased continuously. The thermal stability of the nanocapsules became weaker with higher contents of core material. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42334.
- 8 May 2015
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 132 (31)
Poly(methyl methacrylate) copolymer nanocapsules containing phase‐change material (n‐dodecanol) prepared via miniemulsion polymerization
Poly(methyl methacrylate) copolymer nanocapsules containing the phase‐change material n‐dodecanol, which could be used for energy storage, were prepared with different comonomers via miniemulsion polymerization. The thermal properties, morphology, and composition of nanocapsules were characterized with differential scanning calorimetry, thermogravimetric analysis, transmission electron microscopy, and Fourier transform infrared spectroscopy. The results show that the thermal properties and morphology of the nanocapsules were influenced greatly by the type and amount of comonomers. Under the same dosage of 4 wt %, the nanocapsules prepared with the comonomer acrylamine and which had a moderate hydrophilicity showed the highest phase‐change latent heat of 109.3 J/g; the acrylamine that had a moderate hydrophilicity and the highest encapsulation efficiency of 91.3%. The size of the nanocapsules ranged from 50 to 100 nm with a uniform spherical shape and apparent core–shell structure. We also found that when the amount of the soft comonomer butyl acrylate was increased, the phase‐change latent heat of the nanocapsules first decreased slightly, then increased to the maximum value with deformed spherical and conglutinated morphology, and finally decreased continuously. The thermal stability of the nanocapsules became weaker with higher contents of core material. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42334.
- 18 November 2011
- Published by Springer Nature in Colloid and Polymer Science
- Vol. 290 (4) , 307-314
Fabrication and characterization of nanocapsules containing n-dodecanol by miniemulsion polymerization using interfacial redox initiation
- 18 November 2011
- Published by Springer Nature in Colloid and Polymer Science
- Vol. 290 (4) , 307-314
Fabrication and characterization of nanocapsules containing n-dodecanol by miniemulsion polymerization using interfacial redox initiation
- 21 May 2011
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 8 (4) , 505-511
Preparation and characterization of poly(MMA–BA)/nano-ATO hybrid latex via miniemulsion polymerization
- 21 May 2011
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 8 (4) , 505-511
Preparation and characterization of poly(MMA–BA)/nano-ATO hybrid latex via miniemulsion polymerization
- 20 June 2008
- Published by Wiley in Polymer Composites
- Vol. 30 (3) , 281-287
Preparation and characterization of poly(styrene‐b‐butadiene‐b‐styrene)/montmorillonite nanocomposites
With some polymerizable small molecules grafting onto the montmorillonite surface, we disposed the clay through in‐situ emulsion polymerization, and the structure of the modified montmorillonites were studied through Fourier transform infrared spectroscopy (FTIR) and X‐ray diffraction (XRD). The nanocomposites of poly(styrene‐b‐butadiene‐b‐styrene) (SBS)/montmorillonite with excellent mechanical properties were prepared by mixing SBS and the modified montmorillonite on the double rollers at 150°C. The exfoliation of the layered silicates was confirmed by XRD analysis and transmission electron microscopy (TEM) observation. After mechanical kneading of the molten nanocomposites, the exfoliation structure of the silicates is still stable for polystyrene macromolecules grafting onto the silicates. Upon the addition of the modified montmorillonite, the tensile strength, elongation at break and tear strength of the nanocomposites increased from 22.6 MPa to 31.1 MPa, from 608% to 948%, from 45.32 N/mm to 55.27 N/mm, respectively. The low‐temperature point of glass‐transition temperature (Tg) of the products was about −77°C, almost constant, but the high‐temperature point increased from 97°C to 106°C. In addition, the nanocomposites of SBS and modified montmorillonites showed good resistance to thermal oxidation and aging. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers
- 20 June 2008
- Published by Wiley in Polymer Composites
- Vol. 30 (3) , 281-287
Preparation and characterization of poly(styrene‐b‐butadiene‐b‐styrene)/montmorillonite nanocomposites
With some polymerizable small molecules grafting onto the montmorillonite surface, we disposed the clay through in‐situ emulsion polymerization, and the structure of the modified montmorillonites were studied through Fourier transform infrared spectroscopy (FTIR) and X‐ray diffraction (XRD). The nanocomposites of poly(styrene‐b‐butadiene‐b‐styrene) (SBS)/montmorillonite with excellent mechanical properties were prepared by mixing SBS and the modified montmorillonite on the double rollers at 150°C. The exfoliation of the layered silicates was confirmed by XRD analysis and transmission electron microscopy (TEM) observation. After mechanical kneading of the molten nanocomposites, the exfoliation structure of the silicates is still stable for polystyrene macromolecules grafting onto the silicates. Upon the addition of the modified montmorillonite, the tensile strength, elongation at break and tear strength of the nanocomposites increased from 22.6 MPa to 31.1 MPa, from 608% to 948%, from 45.32 N/mm to 55.27 N/mm, respectively. The low‐temperature point of glass‐transition temperature (Tg) of the products was about −77°C, almost constant, but the high‐temperature point increased from 97°C to 106°C. In addition, the nanocomposites of SBS and modified montmorillonites showed good resistance to thermal oxidation and aging. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers