Robust Adaptive Control of Fully Constrained Cable-Driven Serial Manipulator with Multi-Segment Cables Using Cable Tension Sensor Measurements
Open Access
Abstract
The structure of the cable-driven serial manipulator (CDSM) is more complex than that of the cable-driven parallel manipulator (CDPM), resulting in higher model complexity and stronger structural and parametric uncertainties. These drawbacks challenge the stable trajectory-tracking control of a CDSM. To circumvent these drawbacks, this paper proposes a robust adaptive controller for an n-degree-of-freedom (DOF) CDSM actuated by m cables. First, two high-level controllers are designed to track the joint trajectory under two scenarios, namely known and unknown upper bounds of uncertainties. The controllers include an adaptive feedforward term based on inverse dynamics and a robust control term compensating for the uncertainties. Second, the independence of control gains from the upper bound of uncertainties and the inclusion of the joint viscous friction coefficient into the dynamic parameter vector are realised. Then, a low-level controller is designed for the task of tracking the cable tension trajectory. The system stability is analysed using the Lyapunov method. Finally, the validity and effectiveness of the proposed controllers are verified by experimenting with a three-DOF six-cable CDSM. In addition, a comparative experiment with the classical proportional–integral–derivative (PID) controller is carried out.Keywords
This publication has 26 references indexed in Scilit:
- Design of a Cable-Driven Auto-Charging Robot for Electric VehiclesIEEE Access, 2020
- Kinematics, Dynamics, and Control of a Cable-Driven Hyper-Redundant ManipulatorIEEE/ASME Transactions on Mechatronics, 2018
- Design of a cable-driven hyper-redundant robot with experimental validationInternational Journal of Advanced Robotic Systems, 2017
- Design, Kinematics, and Control of a Multijoint Soft Inflatable Arm for Human-Safe InteractionIEEE Transactions on Robotics, 2017
- Design of a 7-DOF Cable-Driven Arm Exoskeleton (CAREX-7) and a Controller for Dexterous Motion Training or AssistanceIEEE/ASME Transactions on Mechatronics, 2016
- Self-feedback motion control for cable-driven parallel manipulatorsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013
- Design of a Cable-Driven Arm Exoskeleton (CAREX) for Neural RehabilitationIEEE Transactions on Robotics, 2012
- On the Force-Closure Analysis of n-DOF Cable-Driven Open Chains Based on Reciprocal Screw TheoryIEEE Transactions on Robotics, 2012
- Nuclear snake‐arm robotsIndustrial Robot: the international journal of robotics research and application, 2012
- Design of Tendon-Driven ManipulatorsJournal of Vibration and Acoustics, 1995