YLYa’nan Lou

Ya’nan Lou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ya’nan Lou has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Precision Data-Driven Collision Localization with a Dedicated Matrix Template for Electric Vehicle Automatic Charging

    by Haoyu Lin, Pengkun Quan, Zhuo Liang, Ya’nan Lou, Dongbo Wei, Shichun Di

    With the increasing maturity of autonomous driving technology and automated valet parking, public awareness of robot-based automatic charging for electric vehicles has gradually increased. The positioning of the charging port for electric vehicles is a prerequisite for achieving automatic charging. The common approach is to use visual methods for charging port positioning. However, due to factors such as external light conditions, humidity, and temperature, the visual system may experience insufficient positioning accuracy, leading to difficulties in executing the charging plug-in task. To address this issue, this paper proposes a data-driven collision localization method based on the vibration signal generated by the contact. During the data collection process, we first introduce a collision point matrix template suitable for automatic charging plug-in. This template covers the entire charging port and supports the acquisition of dense collision vibration data. Using this collision point matrix template, the collision localization problem can be transformed into a classification problem of collision vibration information corresponding to different collision points. Then, the collision vibration data obtained, based on this template, are used to train the collision localization model, which mainly consists of an echo state network (ESN) and support vector machine (SVM). The AUBO-i5 6-DOF articulated robot is employed to test the proposed collision localization method under different joint configurations. The simulated experimental results demonstrate the effectiveness of the proposed collision localization method, showcasing a promising localization accuracy and root mean square error (RMSE).


  • Force-Closure Analysis of Multilink Cable-Driven Redundant Manipulators Considering Cable Coupling and Friction Effects

    by Zhuo Liang, Bo Jiang, Pengkun Quan, Haoyu Lin, Ya'NAn Lou, Shichun Di

    Multilink cable-driven redundant manipulators (MCDRMs) offer numerous advantages over conventional manipulators, making them well suited for operation in narrow and confined environments. However, MCDRMs face limitations in terms of cable quantity and cable routing scheme, which are crucial for achieving full constraint. Force closure, a crucial parameter for evaluating the performance of MCDRMs, ensures that the manipulator can exert sufficient force and torque to stably perform tasks within its workspace. In this article, we propose a novel force-closure analysis method for MCDRMs that considers both cable coupling and friction effects. First, we utilize the Euler–Eytelwein equation to analyze the effect of friction between cables and cable routing holes on the tension of different cable subsegments. Then, utilizing the reciprocal screw theory, we elucidate the cable coupling in MCDRMs and calculate the active joint torques provided by the cable tension, as well as passive joint torques generated by external wrenches. Furthermore, we analyze the force closure of the MCDRM by balancing the passive and active joint torques. Finally, simulations and experiments are conducted using a planar MCDRM. The results demonstrate that the proposed method enables systematic and accurate analysis of the force closure of MCDRDs with arbitrary cable routing schemes.


  • Open Access

    Research on Identification and Location of Charging Ports of Multiple Electric Vehicles Based on SFLDLC-CBAM-YOLOV7-Tinp-CTMA

    by Pengkun Quan, Ya’nan Lou, Haoyu Lin, Zhuo Liang, Dongbo Wei, Shichun Di

    With the gradual maturity of autonomous driving and automatic parking technology, electric vehicle charging is moving towards automation. The charging port (CP) location is an important basis for realizing automatic charging. Existing CP identification algorithms are only suitable for a single vehicle model with poor universality. Therefore, this paper proposes a set of methods that can identify the CPs of various vehicle types. The recognition process is divided into a rough positioning stage (RPS) and a precise positioning stage (PPS). In this study, the data sets corresponding to four types of vehicle CPs under different environments are established. In the RPS, the characteristic information of the CP is obtained based on the combination of convolutional block attention module (CBAM) and YOLOV7-tinp, and its position information is calculated using the similar projection relationship. For the PPS, this paper proposes a data enhancement method based on similar feature location to determine the label category (SFLDLC). The CBAM-YOLOV7-tinp is used to identify the feature location information, and the cluster template matching algorithm (CTMA) is used to obtain the accurate feature location and tag type, and the EPnP algorithm is used to calculate the location and posture (LP) information. The results of the LP solution are used to provide the position coordinates of the CP relative to the robot base. Finally, the AUBO-i10 robot is used to complete the experimental test. The corresponding results show that the average positioning errors (x, y, z, rx, ry, and rz) of the CP are 0.64 mm, 0.88 mm, 1.24 mm, 1.19 degrees, 1.00 degrees, and 0.57 degrees, respectively, and the integrated insertion success rate is 94.25%. Therefore, the algorithm proposed in this paper can efficiently and accurately identify and locate various types of CP and meet the actual plugging requirements.


  • Open Access

    Small-Scale Zero-Shot Collision Localization for Robots Using RL-CNN

    by Haoyu Lin, Ya’nan Lou, Pengkun Quan, Zhuo Liang, Dongbo Wei, Shichun Di

    For safety reasons, in order to ensure that a robot can make a reasonable response after a collision, it is often necessary to localize the collision. The traditional model-based collision localization methods, which are highly dependent on the designed observer, are often only useful for rough localization due to the bias between simulation and real-world application. In contrast, for fine collision localization of small-scale regions, data-driven methods can achieve better results. In order to obtain high localization accuracy, the data required by data-driven methods need to be as comprehensive as possible, and this will greatly increase the cost of data collection. To address this problem, this article is dedicated to developing a data-driven method for zero-shot collision localization based on local region data. In previous work, global region data were used to construct the collision localization model without considering the similarity of the data used for analysis caused by the assembly method of the contact parts. However, when using local region data to build collision localization models, the process is easily affected by similarity, resulting in a decrease in the accuracy of collision localization. To alleviate this situation, a two-stage scheme is implemented in our method to simultaneously isolate the similarity and realize collision localization. Compared with the classical methods, the proposed method achieves significantly improved collision localization accuracy.


  • Open Access

    Research on Fast Recognition and Localization of an Electric Vehicle Charging Port Based on a Cluster Template Matching Algorithm

    by Pengkun Quan, Ya’nan Lou, Haoyu Lin, Zhuo Liang, Dongbo Wei, Shichun Di

    With the gradual maturity of driverless and automatic parking technologies, electric vehicle charging has been gradually developing in the direction of automation. However, the pose calculation of the charging port (CP) is an important part of realizing automatic charging, and it represents a problem that needs to be solved urgently. To address this problem, this paper proposes a set of efficient and accurate methods for determining the pose of an electric vehicle CP, which mainly includes the search and aiming phases. In the search phase, the feature circle algorithm is used to fit the ellipse information to obtain the pixel coordinates of the feature point. In the aiming phase, contour matching and logarithmic evaluation indicators are used in the cluster template matching algorithm (CTMA) proposed in this paper to obtain the matching position. Based on the image deformation rate and zoom rates, a matching template is established to realize the fast and accurate matching of textureless circular features and complex light fields. The EPnP algorithm is employed to obtain the pose information, and an AUBO-i5 robot is used to complete the charging gun insertion. The results show that the average CP positioning errors (x, y, z, Rx, Ry, and Rz) of the proposed algorithm are 0.65 mm, 0.84 mm, 1.24 mm, 1.11 degrees, 0.95 degrees, and 0.55 degrees. Further, the efficiency of the positioning method is improved by 510.4% and the comprehensive plug-in success rate is 95%. Therefore, the proposed CTMA in this paper can efficiently and accurately identify the CP while meeting the actual plug-in requirements.


  • Open Access

    Collision Localization and Classification on the End-Effector of a Cable-Driven Manipulator Applied to EV Auto-Charging Based on DCNN–SVM

    by Haoyu Lin, Pengkun Quan, Zhuo Liang, Ya’nan Lou, Dongbo Wei, Shichun Di

    With the increasing popularity of electric vehicles, cable-driven serial manipulators have been applied in auto-charging processes for electric vehicles. To ensure the safety of the physical vehicle–robot interaction in this scenario, this paper presents a model-independent collision localization and classification method for cable-driven serial manipulators. First, based on the dynamic characteristics of the manipulator, data sets of terminal collision are constructed. In contrast to utilizing signals based on torque sensors, our data sets comprise the vibration signals of a specific compensator. Then, the collected data sets are applied to construct and train our collision localization and classification model, which consists of a double-layer CNN and an SVM. Compared to previous works, the proposed method can extract features without manual intervention and can deal with collision when the contact surface is irregular. Furthermore, the proposed method is able to generate the location and classification of the collision at the same time. The simulated experiment results show the validity of the proposed collision localization and classification method, with promising prediction accuracy.


  • Open Access

    Research on Fast Identification and Location of Contour Features of Electric Vehicle Charging Port in Complex Scenes

    by Pengkun Quan, Ya'Nan Lou, Haoyu Lin, Zhuo Liang, Shichun Di

    The maturity of automatic driving and parking technologies is gradually driving electric vehicle charging toward automation. The primary condition of automatic charging that has a high significance is the identification of electric vehicle charging ports. This research proposes an automatic system for the identification and positioning of charging ports of electric vehicles. The system is mainly divided into rough and precise positioning. The former is based on the Hough circle and the Hough line, and locates the position information of the charging port. The latter uses the Canny operator to obtain the contour information of the original and gradient images respectively. All the contours of the two images are fitted into ellipses by the quadratic curve standardization (QCS) method, and irrelevant ellipses are screened out. Finally, the perspective-n-point (PNP) algorithm is used to locate the pose information of the charging port. The aubo-i10 6-DOF articulated robot is used to test the recognition and insertion accuracies in different environments. The results show that the average recognition rate of rough positioning is 97.9%, the average displacement error of precise positioning in X, Y and Z directions are 0.60, 0.83 and 1.23 mm, respectively, and the average angle errors in RX, RY and RZ directions are 1.19, 0.97 and 0.50 degrees, respectively. The average success rate is 94.8%. These results demonstrate that the proposed system meets the basic plug-in requirements of electric vehicle charging ports.


  • Open Access

    Robust Adaptive Control of Fully Constrained Cable-Driven Serial Manipulator with Multi-Segment Cables Using Cable Tension Sensor Measurements

    by Ya’nan Lou, Haoyu Lin, Pengkun Quan, Dongbo Wei, Shichun Di

    The structure of the cable-driven serial manipulator (CDSM) is more complex than that of the cable-driven parallel manipulator (CDPM), resulting in higher model complexity and stronger structural and parametric uncertainties. These drawbacks challenge the stable trajectory-tracking control of a CDSM. To circumvent these drawbacks, this paper proposes a robust adaptive controller for an n-degree-of-freedom (DOF) CDSM actuated by m cables. First, two high-level controllers are designed to track the joint trajectory under two scenarios, namely known and unknown upper bounds of uncertainties. The controllers include an adaptive feedforward term based on inverse dynamics and a robust control term compensating for the uncertainties. Second, the independence of control gains from the upper bound of uncertainties and the inclusion of the joint viscous friction coefficient into the dynamic parameter vector are realised. Then, a low-level controller is designed for the task of tracking the cable tension trajectory. The system stability is analysed using the Lyapunov method. Finally, the validity and effectiveness of the proposed controllers are verified by experimenting with a three-DOF six-cable CDSM. In addition, a comparative experiment with the classical proportional–integral–derivative (PID) controller is carried out.


  • Open Access

    Self-Calibration for the General Cable-Driven Serial Manipulator with Multi-Segment Cables

    by Ya’nan Lou, Haoyu Lin, Pengkun Quan, Dongbo Wei, Shichun Di

    This paper focuses on the kinematic calibration problem for the general cable-driven serial manipulator (CDSM) with multi-segment cables to improve its motion control accuracy. Firstly, to fully describe the calibration parameters of cables, links, joint positions, and the transmission system, this paper proposes a new cable routing description method named cable-routing configuration struct (CRCS), which provides a complete set of parameters to be calibrated for the proposed self-calibration algorithm. Then, a self-calibration algorithm for CDSM with motor incremental encoders is proposed, which can calibrate the robot at one time only using sufficient measured motor and joint positions. Its premise, the initial cable length, needs to be calibrated. Finally, the parameters of a three-DOF (degree of freedom) six-cable CDSM were described using the CRCS description method, and a comparative experiment was carried out on the same motion controller using the parameters before and after calibration. The experiment results of trajectory tracking error showed that the calibration parameters obtained by the proposed calibration algorithm can significantly improve the motion control accuracy of the three-DOF six-cable CDSM. This verified the correctness and effectiveness of the proposed calibration algorithm.


  • Open Access

    A Closed-Form Solution for the Inverse Kinematics of the 2n-DOF Hyper-Redundant Manipulator Based on General Spherical Joint

    by Ya’nan Lou, Pengkun Quan, Haoyu Lin, Dongbo Wei, Shichun Di

    This paper presents a closed-form inverse kinematics solution for the 2n-degree of freedom (DOF) hyper-redundant serial manipulator with n identical universal joints (UJs). The proposed algorithm is based on a novel concept named as general spherical joint (GSJ). In this work, these universal joints are modeled as general spherical joints through introducing a virtual revolution between two adjacent universal joints. This virtual revolution acts as the third revolute DOF of the general spherical joint. Remarkably, the proposed general spherical joint can also realize the decoupling of position and orientation just as the spherical wrist. Further, based on this, the universal joint angles can be solved if all of the positions of the general spherical joints are known. The position of a general spherical joint can be determined by using three distances between this unknown general spherical joint and another three known ones. Finally, a closed-form solution for the whole manipulator is solved by applying the inverse kinematics of single general spherical joint section using these positions. Simulations are developed to verify the validity of the proposed closed-form inverse kinematics model.